Summary
Overview
Work History
Education
Skills
Languages
Timeline
Generic

Eduardo Gomez

Dacula,GA

Summary

Safe and professional Electrician with experience in residential and commercial market. Hardworking and reliable with strong ability to do the best work in each job. Team-oriented mentality. Bilingual. Seeking a opportunity where can utilize and develop skills, knowledge and experience to increase company's productivity and profitability. Looking a good place where can grow up!

Overview

9
9
years of professional experience

Work History

Electrician & Lead Man

JFN Electric LLC & Staffing
Atlanta, Georgia
10.2022 - Current
  • Installed electrical systems in residential and commercial buildings.
  • Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
  • Performed routine maintenance on electrical equipment and systems.
  • Collaborated with contractors to ensure project specifications were met.
  • Diagnosed and repaired electrical faults in various installations.
  • Ensured compliance with safety regulations during all electrical work.
  • Trained junior electricians on safe practices and installation techniques.
  • Managed inventory of tools and materials for ongoing projects.
  • Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers, transformers, or other components.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Ensured that all work was completed in accordance with applicable codes.
  • Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
  • Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Worked extensively on three-phase, 277/480 volt power distribution systems.
  • Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
  • Installed grounding system per NEC code requirements.
  • Performed electrical utility services for industrial-based and new building projects.
  • Worked on high voltage switchgear projects involving transformer hookups and terminations up to 15kv level.
  • Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
  • Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
  • Planned layout and installation of wiring and fixtures based on project specifications and building codes.

Electrician

Outsource Low Voltage & Electrical Workforce
Atlanta, Georgia
07.2022 - 10.2022
  • EMT, Conduct Bending, NEC Standards.
  • Follow electrical codes, diagnose electrical problems using diagrams, and blueprints.
  • Installed electrical systems in residential and commercial buildings.
  • Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
  • Connected wires to circuit breakers, transformers, or other components.
  • Connected wires to circuit breakers and transformers.
  • Installed grounding system per NEC code requirements.
  • Performed electrical utility services for industrial-based and new building projects.

Electrician

Dean Electric Inc
Atlanta, GA
02.2021 - 07.2022
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers and transformers.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Traced and diagnosed electrical malfunctions using hand tools and test equipment.
  • Installed panels
  • Installed boxes, light, switches, GFCI and receptacles.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Installed and bending conduit (EMT / RIGID / PVC), wire and motor controls.
  • Slabs and decks.
  • Trim.
  • Worked extensively on three-phase, 277/480 volt power distribution systems.
  • Assessed, tested and operated variety of electrical components and systems.
  • Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
  • Planned and installed complicated circuit systems in both commercial and residential construction.
  • Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
  • Performed electrical utility services for industrial-based and new building projects.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Interpreted blueprints and technical drawings to correctly assemble panels and control boxes.
  • Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
  • Troubleshot EMCS and variable frequency drive systems to correct and rectify issues.
  • Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
  • Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.
  • Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
  • Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
  • Developed accurate estimates and proposals to perform electrical installations and troubleshooting.

Electrician Top Helper

DLG Construction LLC
Atlanta, GA
09.2018 - 02.2021
  • Pipe and bending EMT / PVC / RIGID.
  • Cable tray, underground, conduit (up to 4'')
  • Installing boxes, lights, switches, GFCI and receptacles.
  • Trim.
  • Underground installations
  • Slabs and deck
  • Put in new electrical components, fixtures and motors.
  • Reviewed blueprints and electrical schematics to perform tasks to specifications.
  • Dug trenches and created holes to pull conduit and install supports.
  • Worked in team-based environment to accomplish projects.
  • Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
  • Gathered required tools and equipment for each task to increase efficiency.
  • Followed relevant electrical and building codes for each job.
  • Measured and prepared supplies for electrical tasks.
  • Listened to directives of senior electrical professionals to complete efficient tasks.
  • Adhered to company standards and OSHA regulations for work site safety.
  • Built controllers and panels to complete system installations.
  • Performed installation, maintenance and tests of electrical energy systems and components by safely using all equipment and tools.
  • Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
  • Inspected existing wiring to identify short circuits.
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
  • Resolved issues with existing systems and replaced malfunctioning parts.
  • Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
  • Utilized measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps accurately, efficiently and safely to complete installations and repairs.
  • Assisted electricians in wiring residential buildings with installation of electrical conduits.
  • Calculated wattages, KW and KVA to provide reliable power supply system for residential and commercial units.
  • Communicated effectively with public utility companies to develop expertise in collaboration, systems cabling, circuitry and commercial projects.

Electrician Helper

Atlantic Workforce
Buford, GA
04.2017 - 08.2018
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Kept work areas clean, neat and organized for efficient operations
  • Assisted electricians in wiring commercial buildings with installation of electrical conduits. Pipe threading and bending. EMT / PVC / RIGID.
  • Started learning and reading blueprints.
  • Installed boxes conduit and wire in accordance to specs.
  • Connect wires to circuit breakers.
  • Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
  • Dug trenches and created holes to pull conduit and install supports.
  • Completed skilled work under supervision of fully qualified professionals.
  • Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes and conduit.
  • Underground installation.
  • Worked in team-based environment to accomplish projects.
  • Kept work areas clean, neat and free of hazards.
  • Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
  • Inspected existing wiring to identify short circuits.
  • Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
  • Maintained organization, cleanliness and safety in work areas.
  • Followed relevant electrical and building codes for each job.
  • Built controllers and panels to complete system installations.

Education

High School Diploma -

Chancery High School
Orlando, FL
05.2017

Skills

  • Liable
  • Hard Worker
  • Team Worker
  • Attention to details
  • Friendly
  • Dedicated
  • Proactive
  • Creative
  • Problem resolving
  • Critical thinking
  • Honest
  • Job Specifications Reading
  • NEC Codes and Codebook
  • Test Equipment Operation
  • Local Codes Compliance
  • Repair Planning
  • Circuit Continuity Assessment
  • Sub-Panel Installation
  • Scaffolding and Ladder Work
  • Conduit and Pipe Laying
  • Wire Insulation
  • Electrical Systems Testing
  • Grounding Installation
  • AC/DC Power and Control Systems
  • Branch Circuit Wiring
  • Lock Out-Tag Out Procedures
  • Transformer Connection
  • Fixture Installation
  • Field Installation Expert
  • Residential Electric Construction
  • New Construction
  • Hand and Power Tool Operation
  • Electrical Wiring and Fixtures
  • Blueprint Reading
  • Power Cable Connection
  • Hand and Power Tools
  • Electrical Safety
  • Layout Planning
  • Appliance Installation
  • Supply Control
  • Malfunction Diagnostics
  • Hazard and Defect Detection

Languages

Spanish
Native/ Bilingual
English
Full Professional

Timeline

Electrician & Lead Man

JFN Electric LLC & Staffing
10.2022 - Current

Electrician

Outsource Low Voltage & Electrical Workforce
07.2022 - 10.2022

Electrician

Dean Electric Inc
02.2021 - 07.2022

Electrician Top Helper

DLG Construction LLC
09.2018 - 02.2021

Electrician Helper

Atlantic Workforce
04.2017 - 08.2018

High School Diploma -

Chancery High School
Eduardo Gomez