Summary
Overview
Work History
Education
Skills
Languages
Timeline
Generic

Eduardo Talamantes

El Paso,TX

Summary

Focused and hardworking electrician offering 4+ years of experience working with electrical teams. Able to independently run cables, build boxes and solder connections. Careful and detail-oriented in inspecting the system wiring and locating faults to restore full functionality. Organized Truck Driver with proven track record of delivering within specified time frames. Customer-focused and strong communicator to effectively interact with others. Quick learner with management potential. Class A drivers license with hazmat, doubles-triples and tankers endorsements.

Overview

13
13
years of professional experience

Work History

Truck Driver

XPO Logistics
08.2023 - Current
  • Operated various truck types, ensuring adherence to safety regulations and transportation protocols.
  • Planned efficient routes to optimize delivery times and reduce fuel consumption.
  • Conducted routine vehicle inspections and performed minor repairs to maintain operational readiness.
  • Maintained accurate logs of mileage, fuel usage, and delivery schedules for compliance purposes.
  • Coordinated with dispatch teams to receive assignments and address logistical challenges effectively.
  • Implemented best practices for cargo securement, minimizing damage during transport operations.
  • Operated with safety and skill to avoid accidents and delays.
  • Maintained a clean driving record while adhering to company policies and federal regulations for transportation safety.
  • Maintained daily, legible DOT log book and submitted corresponding documents.
  • Inspected trucks for malfunctions and reported vehicles to management for corrective action.
  • Demonstrated safe driving by following regulations and safety procedures, resulting in zero accidents.
  • Increased safety standards by conducting thorough pre-and post-trip inspections of the truck and trailer.
  • Successfully navigated challenging weather conditions in order to maintain on-time delivery rates without compromising safety or cargo integrity.
  • Dropped and hooked trailers and changed configuration of equipment.

Truck driver/Owner operator

Landstar Ranger
10.2022 - 08.2023
  • Operated with safety and skill to avoid accidents and delays.
  • Inspected vehicle and equipment before and after every trip to monitor routine wear and identify larger maintenance issues.
  • Spoke professionally with customers regarding complaints, gathering all necessary information to make educated decisions and address issues.
  • Verified contents of inventory loads against shipping papers. Transported poisons, inhalants and flammable liquids, without incident across the 42 US states.
  • Finalized daily logs on schedule to update internal records and uphold DOT requirements.
  • Maneuvered trucks into loading or unloading positions, following signals from loading crew to properly position vehicle and loading equipment.
  • Inspected trucks for malfunctions and reported vehicles to management for corrective action.
  • Checked shipping papers to determine nature of load and checked for presence of hazardous materials.
  • Completed daily inspections, basic maintenance and common repair actions to keep equipment operating at full capacity.
  • Maintained safe driving record by observing all road rules, remaining cautious and alert in unfamiliar areas and keeping control of vehicle at all times.
  • Completed basic maintenance and minor repairs to keep vehicle neat and running properly.
  • Completed regular inspections and maintenance actions, as well as basic equipment repairs, to keep equipment operating at peak levels.
  • Inspected truck for defects and safe operating condition before, during and after trips.
  • Minimized delays by planning and adjusting routes to account for changing weather and traffic conditions.
  • Communicated with dispatchers and other office personnel to handle two-way updates and adjust daily schedules.
  • Contacted safety to report any and all chemical spills or incidents to determine best methods for resolution.
  • Maintained current Class A CDL with Hazardous Materials for the last 3 years, doubles and triples and tankers endorsements for the last 6 years.
  • Inspected vehicle before and after every trip and conducted minor repairs, including mud flaps, lights and fuses.
  • Loaded and unloaded products at warehouses and customer locations using hand trucks, pallet jacks and forklifts.
  • Demonstrated safe driving by following all regulations and safety procedures, resulting in zero accidents over 6 years.

Truck Driver

Global Freight
El Paso, TX
10.2020 - 10.2022
  • Completed regular inspections and maintenance actions, as well as basic equipment repairs, to keep equipment operating at peak levels.
  • Dropped and hooked trailers and changed configuration of equipment.
  • Maintained current Class A CDL with Hazardous Materials and Doubles and Triples endorsements.
  • Clearly communicated with dispatchers to give updated information on estimated times of arrival and latest road conditions.
  • Maximized load safety by balancing, securing and weighing products.
  • Operated with safety and skill to avoid accidents and delays.
  • Demonstrated safe driving by following regulations and safety procedures, resulting in zero accidents.
  • Completed regular inspections and maintenance actions, as well as basic equipment repairs, to keep equipment operating at peak levels.
  • Executed safety practices and inventory loading without customer complaints, accidents or lost-time.

journeyman electrician

Excel Industries
12.2019 - 05.2020
  • Repaired motors, transformers, generators, electronic controllers, machine tools, and industrial robots after checking electrical units for broken insulation and loose connections.
  • Examined electrical units to identify and tighten loose connections.
  • Built panels and control systems for installations in private and commercial buildings.
  • Replaced faulty circuit breakers, fuses, switches, electronic components, wires, old fuse boxes, and hook-up appliances.
  • Drilled holes and threaded wires and cables through ducts or conduits using hand and power tools.
  • Tested electrical equipment and systems before use to ensure proper functioning.
  • Assisted Chief Electrician in supplying and maintaining tools, vehicles, and equipment.
  • Measured, cut, and bent wire and conduit using various measuring instruments and hand tools for installation and assembly.
  • Secured brackets to bulkheads with screws and bolts and pulled wires through conduits leading towards connection boxes, switch panels, and other terminals.
  • Used hand and power tools such as shovels, drills and airhammers to break up existing materials, dig trenches and drill holes.

Truck Driver

Arts Transport
01.2018 - 12.2019
  • Enhanced customer relations by consistently delivering shipments according to schedule and quickly addressing any concerns.
  • Inspected trucks for malfunctions and reported vehicles to management for corrective action.
  • Demonstrated safe driving by following regulations and safety procedures, resulting in zero accidents.
  • Executed safety practices and inventory loading without customer complaints, accidents or lost-time.
  • Maximized load safety by balancing, securing and weighing products.
  • Minimized delays by planning and adjusting routes to account for changing weather and traffic conditions.
  • Completed regular inspections and maintenance actions, as well as basic equipment repairs, to keep equipment operating at peak levels.

Tanker Truck Driver

C&C
03.2017 - 10.2018
  • Hobbs , nm Kept delivery records, placed orders, collected payments, and kept records of transactions.
  • Drove specialized transportation equipment including tankers, pneumatic bulkers, and double tractor-trailers.
  • Maintained consistent, timely delivery record, with all deliveries arriving within schedule guidelines.
  • Provided in-depth documentation on equipment condition and issues.
  • Ensured on-time deliveries in compliance with specified timeframes.
  • Planned smooth vehicle routes to minimize delivery delays.
  • Operated equipment such as forklifts and pallet jacks to move loads onto and off the vehicle.
  • Drove trucks with capacity over 20 tons to transport and deliver products such as water and oil.
  • Safely transported dangerous goods by complying with the applicable safety standards.
  • Completed basic vehicle maintenance such as adding oil and fuel, lubricating parts and performing minor repairs.
  • Checked the mechanical, safety and emergency equipment on each vehicle before leaving the distribution center.
  • Refilled truck after completing deliveries to return in ready-to-use condition.
  • Drove tanker trucks to make deliveries
  • Lubricating oil and crude oil to customers.

apprentice electrician

Berg electric corp
01.2015 - 02.2017
  • Used power tools on the job, including drills and saws.
  • Installed conductors in cable tray and raceway.
  • Cleaned and maintained the worksite and complied with applicable safety regulations.
  • Maintained and reviewed electrical systems for compliance with construction plans and specifications.
  • Installed conduit systems, lighting systems, and control systems.
  • Used tape measures and hand tools to measure wire and conduit for installation.
  • Performed work independently without direct supervision.
  • Used hand and power tools such as shovels, drills and airhammers to break up existing materials, dig trenches and drill holes.
  • Measured, cut, and bent wire and conduit using various measuring instruments and hand tools for installation and assembly.
  • Secured brackets to bulkheads with screws and bolts and pulled wires through conduits leading towards connection boxes, switch panels, and other terminals.
  • Reviewed technical documentation to accurately measure and cut the pieces for each new installation or repair project.

journeyman electrician

Berg electric corp
08.2016 - 12.2016
  • Measured, cut, and bent wire and conduit using various measuring instruments and hand tools for installation and assembly.
  • Built panels and control systems for installations in private and commercial buildings.
  • Completed basic and semi-skilled work to support the job's projects.
  • Assisted Chief Electrician in supplying and maintaining tools, vehicles, and equipment.
  • Examined electrical units to identify and tighten loose connections.
  • Secured brackets to bulkheads with screws and bolts and pulled wires through conduits leading towards connection boxes, switch panels, and other terminals.
  • Tested electrical equipment and systems before use to ensure proper functioning.
  • Replaced faulty circuit breakers, fuses, switches, electronic components, wires, old May 2012 fuse boxes, and hook-up appliances.
  • Used hand and power tools such as shovels, drills and airhammers to break up existing materials, dig trenches and drill holes.
  • Drilled holes and threaded wires and cables through ducts or conduits using hand and power tools.

journeyman electrician

03.2016 - 08.2016
  • Traded short circuits in wiring to locate and fix the root cause of each issue.
  • Measured, cut, and bent wire and conduit using various measuring instruments and hand tools for installation and assembly.
  • Assisted Chief Electrician in supplying and maintaining tools, vehicles, and equipment.
  • Tested electrical equipment and systems before use to ensure proper functioning.
  • Installed electrical components, equipment, and systems; fabricated parts and components and assembled temporary equipment.
  • Used hand and power tools such as shovels, drills and airhammers to break up existing materials, dig trenches and drill holes.
  • Conducted regular inspections of wiring fixtures and equipment under guidance of Electrician and in compliance with relevant safety and operational codes.
  • Drilled holes and threaded wires and cables through ducts or conduits using hand and power tools.
  • Reviewed technical documentation to accurately measure and cut the pieces for each new installation or repair project.
  • Secured brackets to bulkheads with screws and bolts and pulled wires through conduits leading towards connection boxes, switch panels, and other terminals.
  • Replaced faulty circuit breakers, fuses, switches, electronic components, wires, old May 2012 fuse boxes, and hook-up appliances.
  • Taught new employees important procedures such as bending and read prints.
  • Met targets consistently by working hard and with strong attention to detail.

apprentice electrician

Sun Electric
03.2013 - 01.2015
  • Troubleshot issues with electrical systems using diagnostic tools.
  • Used power tools on the job, including drills and saws.
  • Lifted, positioned, and secured materials and components required.
  • In charge of keeping work area clean and organized.
  • Hand dig most of the time for pipe runs under ground Installation of electric pump panels.

Education

High School Diploma - undefined

Irvin High school
El Paso, Texas

Skills

  • Optimized scheduling and prioritization of tasks to enhance productivity
  • Oversaw process monitoring to ensure operational efficiency
  • Executed transformer connection procedures to ensure optimal electrical performance
  • Managed vehicle service documentation processes to ensure compliance and accuracy
  • Executed grounding installation procedures to ensure electrical safety and compliance
  • Executed damage reporting procedures to ensure accurate documentation of incidents
  • Executed wire insulation processes to ensure electrical safety and efficiency
  • Executed comprehensive problem-solving strategies to identify and resolve operational challenges
  • Executed comprehensive malfunction diagnostics to identify and resolve technical issues
  • Assisted in loading and unloading flatbed trailers Supported transportation teams in securing cargo effectively Contributed to maintaining trailer cleanliness and organization
  • Assisted in installation of electrical wiring and fixtures Supported maintenance of electrical systems to ensure functionality Collaborated with team members to troubleshoot electrical issues
  • Maintained valid driver's license to ensure compliance with transportation regulations
  • Executed conduit and pipe laying operations with precision and efficiency
  • Demonstrated meticulous attention to detail in all tasks and projects

Languages

Spanish - Native or Bilingual
English - Native or Bilingual

Timeline

Truck Driver

XPO Logistics
08.2023 - Current

Truck driver/Owner operator

Landstar Ranger
10.2022 - 08.2023

Truck Driver

Global Freight
10.2020 - 10.2022

journeyman electrician

Excel Industries
12.2019 - 05.2020

Truck Driver

Arts Transport
01.2018 - 12.2019

Tanker Truck Driver

C&C
03.2017 - 10.2018

journeyman electrician

Berg electric corp
08.2016 - 12.2016

journeyman electrician

03.2016 - 08.2016

apprentice electrician

Berg electric corp
01.2015 - 02.2017

apprentice electrician

Sun Electric
03.2013 - 01.2015

High School Diploma - undefined

Irvin High school