Edward Garza
Alice,TX
Summary
Accomplished Journeyman Pipefitter with extensive experience at Bechtel and many more company from New construction commercial and turnarounds specializing in pipe installation and maintenance. Proven ability to enhance project efficiency through meticulous blueprint analysis and effective teamwork. Skilled in pressure testing and problem-solving, consistently delivering high-quality results while adhering to safety standards and reducing material waste.
Overview
11
11
years of professional experience
1
1
Certification
Work History
Journeyman Pipefitter
Performance
McGregor, TX
04.2025 - 08.2025
- Fabricated, assembled, installed and maintained piping systems.
- Completed complex projects on time through efficient time management and prioritization of tasks.
- Ensured safe work environments by strictly adhering to industry safety standards and procedures.
- Performed essential maintenance tasks on pipe systems to extend their life span and reduce the risk of failure.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Prevented potential delays in construction schedules by proactively identifying potential hazards or obstacles in the workspace.
- Threaded pipes using piping machines.
- Established strong working relationships with colleagues across trades for better collaboration during multi-disciplinary projects.
- Reduced material waste by accurately measuring, cutting, and assembling piping systems.
- Improved project efficiency by skillfully reading and interpreting blueprints, plans, and specifications.
- Inspected and tested existing pipe systems to identify system defects and malfunctions.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
- Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
- Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
Journeyman Pipefitter
Bechtel
Gregory, TX
01.2023 - 03.2025
- Fabricated, assembled, installed and maintained piping systems.
- Completed complex projects on time through efficient time management and prioritization of tasks.
- Ensured safe work environments by strictly adhering to industry safety standards and procedures.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Threaded pipes using piping machines.
- Established strong working relationships with colleagues across trades for better collaboration during multi-disciplinary projects.
- Inspected and tested existing pipe systems to identify system defects and malfunctions.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
- Filled pipe systems with water and air to determine location of leaks.
- Planned pipe system layout, installation and repair according to specifications.
- Used clamps and brackets to attach pipes to walls, structures, and fixtures.
- Measured, threaded, and cut materials to correct angles.
- Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
Journeyman Pipefitter
PCL Industrial Constructors
Port Lavaca Tx
02.2018 - 11.2022
- Fabricated, assembled, installed and maintained piping systems.
- Completed complex projects on time through efficient time management and prioritization of tasks.
- Ensured safe work environments by strictly adhering to industry safety standards and procedures.
- Performed essential maintenance tasks on pipe systems to extend their life span and reduce the risk of failure.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Prevented potential delays in construction schedules by proactively identifying potential hazards or obstacles in the workspace.
- Threaded pipes using piping machines.
- Established strong working relationships with colleagues across trades for better collaboration during multi-disciplinary projects.
- Reduced material waste by accurately measuring, cutting, and assembling piping systems.
- Enhanced system reliability by performing hydrostatic testing before final installation or repairs.
- Inspected and tested existing pipe systems to identify system defects and malfunctions.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Monitored pipeline pressure and flow rates to facilitate safe and efficient operation.
- Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
- Filled pipe systems with water and air to determine location of leaks.
- Interpreted blueprints to determine locations, quantities, and sizes of materials required.
- Cut and drilled holes in walls to permit passage of pipes.
- Fabricated piping pieces and components in line with design specifications for each system.
- Used clamps and brackets to attach pipes to walls, structures, and fixtures.
- Measured, threaded, and cut materials to correct angles.
- Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
Journeyman Pipefitter
TGE Industrial Services
Hackberry, LA
01.2015 - 01.2018
- Fabricated, assembled, installed and maintained piping systems.
- Completed complex projects on time through efficient time management and prioritization of tasks.
- Ensured safe work environments by strictly adhering to industry safety standards and procedures.
- Performed essential maintenance tasks on pipe systems to extend their life span and reduce the risk of failure.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Prevented potential delays in construction schedules by proactively identifying potential hazards or obstacles in the workspace.
- Threaded pipes using piping machines.
- Established strong working relationships with colleagues across trades for better collaboration during multi-disciplinary projects.
- Reduced material waste by accurately measuring, cutting, and assembling piping systems.
- Collaborated with cross-functional teams to ensure seamless integration of piping systems within larger construction projects.
- Demonstrated flexibility by adeptly handling various pipe materials, including steel, copper, PVC, and cast iron in different environments.
- Improved project efficiency by skillfully reading and interpreting blueprints, plans, and specifications.
- Increased client satisfaction by maintaining clear communication regarding project progress and addressing concerns promptly.
- Optimized pipe system performance by conducting thorough inspections and troubleshooting issues effectively.
- Delivered exceptional customer service when interacting with clients during on-site visits or consultations.
- Demonstrated versatility with expertise in welding processes, including MIG, TIG, and stick welding for various applications.
- Enhanced system reliability by performing hydrostatic testing before final installation or repairs.
- Inspected and tested existing pipe systems to identify system defects and malfunctions.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
- Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
- Filled pipe systems with water and air to determine location of leaks.
- Interpreted blueprints to determine locations, quantities, and sizes of materials required.
- Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
- Cut and drilled holes in walls to permit passage of pipes.
- Planned pipe system layout, installation and repair according to specifications.
- Fabricated piping pieces and components in line with design specifications for each system.
- Measured, threaded, and cut materials to correct angles.
- Eliminated risks by correctly identifying potential safety hazards.
- Reviewed blueprints and project specifications to determine correct plumbing solutions.
- Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
- Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
Education
High School Diploma -
North Star Education
2025
Skills
- Pump installation
- Flange assembly
- Pipe threading
- Hand and power tools
- Repair and maintenance
- Pipe measuring
- Installation and maintenance
- Pipe alignment
- Pressure testing
- Pipe testing
- Material prepping
- Pipe fitting
- Pipe insulation
- Piping specifications
- Hydraulic systems
- Commercial pipefitting
- Pneumatic systems
- Blueprints and specifications
- Pipe hangers
- Boiler installation
- Pipe rigging
- Hydraulics
- Materials ordering
- Pipe supports
- Pipe fabrication
- Valve installation
- Industrial piping
- Commercial piping
- Plumbing systems
- Material cutting
- Blueprint analysis
- Materials selection
- Piping installations
- Pipe cutting
- Piping layout
- Teamwork
- Problem-solving
- Attention to detail
- Piping installation
- Problem-solving abilities
- Multitasking
- Power tool operation
- Pipe installation
Certification
I received my Nccer in Pipefitting 4 yrs in. After 6 yrs in I received my plus in pipefitting. I also have my osha 30 and osha 10.
Timeline
Journeyman Pipefitter
Performance
04.2025 - 08.2025
Journeyman Pipefitter
Bechtel
01.2023 - 03.2025
Journeyman Pipefitter
PCL Industrial Constructors
02.2018 - 11.2022
Journeyman Pipefitter
TGE Industrial Services
01.2015 - 01.2018
High School Diploma -
North Star Education