Eric J. Olney
Morristown,TN
Summary
Dependable team player, proficient in independent and team environments. Effective at keeping areas clean and organized to avoid delays. I am bringing over eight years of production-related experience, including but not limited to measuring, cutting, and organizing material systems. Along with minimal supervisory experience. I have operated multiple pieces of equipment, following work instructions and procedures to specifications, to ensure I do my personal best.
Determined to grow my knowledge anywhere I can, to improve not just my life but also the people around me. Let us find out where I can improve your workflow, and increase my experience.
Overview
9
9
years of professional experience
1
1
Certification
Work History
Flexographic Printing Press Operator
Blue Stone Label
Morristown, TN
06.2024 - 04.2025
- Operated multiple presses, including four different Mark Andy (2)10"-2200s and (2)17"-P7 series, with or without auto registration and die cut control.
- Analyzed customer artwork files to establish efficient setup parameters for printing jobs.
- Adjusted webbing system tension settings to maintain accurate registration throughout production.
- Communicated with supervisors and co-workers regarding production issues to ensure swift resolutions.
- Set up flexographic printing machines according to specifications and conducted quality assurance test runs.
- Performed routine inspections on plates, cylinders, anilox rolls, and other press components before each job run.
- Operated press at consistent speeds, adjusting settings for accurate color matching and registration.
- Calibrated inks to specific Pantone colors or customer requirements to meet production standards.
- Troubleshot technical issues with the press, implementing necessary repairs or adjustments.
Digital Finisher
Brook + Whittle
La Vergne, TN
10.2023 - 06.2024
- Followed established procedures for finished rolls according to customer requirements.
- Identified areas of improvement in order to increase efficiency and reduce waste.
- Monitored finishing processes to ensure quality product was produced in a timely manner.
- Calibrated tension control systems on Digital finishers as needed.
- Adjusted machine settings according to customer specifications.
- Ensured compliance with safety regulations while operating machinery.
- Maintained accurate records of production data, such as roll counts and scrap levels, using computerized tracking systems.
- Maintained a clean work environment at all times by performing regular housekeeping duties.
- Assisted with the troubleshooting of equipment malfunctions.
- Performed daily preventative maintenance on machines, including oiling and cleaning.
- Communicated effectively with team members and supervisors.
- Coordinated workflow between multiple machines and operators.
- Trained new personnel on proper operation of all relevant equipment.
Digital Finisher
Brook + Whittle
Anaheim, CA
01.2022 - 10.2023
- Set up and operated slitters, sheeters, core cutters, joggers, palletizers and other related equipment as required.
- Calibrated tension control systems on rewinders as needed.
- Adjusted machine settings according to customer specifications.
- Collaborated with other departments to maintain proper inventory levels of materials used in the rewinding process.
- Ensured compliance with safety regulations while operating machinery.
- Repaired or replaced worn parts on machines when necessary.
- Performed preventive maintenance to minimize downtime.
- Maintained accurate records of production data, such as roll counts and scrap levels, using computerized tracking systems.
- Addressed equipment malfunctions promptly to avoid delays in production timelines.
- Started machines and moved controls to regulate tension on pressure rolls.
- Monitored product quality, making necessary adjustments as needed.
- Operated and maintained high-speed paper converting machinery.
- Trained new employees on machine operation procedures.
- Took machines apart to clear jams and replace broken components.
- Communicated effectively with team members and supervisors.
- Collaborated with engineers to optimize machine performance.
- Installed attachments to machines in order to complete special operations and projects.
Flexographic Narrow Web Press Operator
Apparel Star Label Co.
Los Angeles, CA
09.2021 - 01.2022
- Followed production schedule and met deadlines efficiently.
- Inspected materials to be printed for defects.
- Trained new staff members on proper use of equipment and safety protocols.
- Reported any irregularities or issues with machines to management personnel.
- Monitored printing process for consistent quality output.
- Adjusted printing pressure, speed and tension for print quality.
- Performed daily maintenance on flexographic printing presses.
- Analyzed customer requirements and adjusted settings accordingly.
- Troubleshot machine malfunctions as needed.
- Prepared ink mixing formulas according to job specifications.
- Calibrated color register systems on the press.
- Loaded printing press with paper and modified margins to comply with paper size requirements.
- Adjusted press settings to optimize print outputs.
- Performed routine press maintenance and cleaning tasks.
- Managed workflow in a fast-paced printing environment.
- Troubleshot and resolved mechanical or print issues quickly.
- Maintained adequate productivity by setting and enforcing deadlines.
- Consistently met or exceeded daily production targets.
- Maintained accurate records of completed print jobs.
- Examined printed copy for correct ink density, position on paper and registration.
- Monitored press performance for optimal productivity rates.
Flexographic Lead
Abbott Label
Santa Fe Springs, CA
10.2016 - 06.2021
- Recommended process improvements to enhance operational safety and efficiency.
- Designed and implemented systems for data collection, monitoring, and reporting of key performance indicators.
- Created standard work instructions for specific tasks and processes to ensure consistent quality standards were met.
- Conducted gap analysis between current state operations and desired future state performance goals.
- Provided guidance on best practices when it comes to implementing new lean programs or initiatives.
- Performed time studies to analyze labor utilization rates and determine optimal staffing levels for each shift.
- Monitored production output metrics such as throughput rates, scrap rates, and rework rates in order to make necessary adjustments or improvements.
- Smoothed development cycle and increased team collaboration by implementing process improvements.
- Evaluated existing processes to identify opportunities for cost savings and increased productivity.
- Identified areas of process improvement through value stream mapping and root cause analysis.
- Maintained an up-to-date inventory management system that tracked stock levels across multiple locations.
- Monitored adherence to standard operating procedures across all departments for compliance purposes.
- Conducted root cause analysis of production issues and identified areas for cost savings and efficiency improvements.
- Assisted in the implementation of total productive maintenance programs designed to reduce downtime incidents.
- Used hand trucks and forklifts to unload, load and transport items.
- Used daily system logs to document production information, discussing issues with management.
- Collaboratively worked with team members to meet quotas.
- Assembled products efficiently, adhering to strict safety guidelines.
- Assisted in troubleshooting production issues effectively.
- Conducted regular maintenance on all equipment as needed.
- Looked through work orders to determine type and quantity of materials needed for each production batch.
- Helped achieve team goals by rotating production lines and daily duties to meet demand.
- Identified and reported equipment malfunctions promptly.
- Upheld company standards while meeting tight deadlines.
- Loaded raw materials into machines for processing.
- Calibrated machines to adhere to quality standards and maintain required productivity levels.
- Deep knowledge of manufacturing best practices.
- Trained new employees on production processes and procedures.
- Set up and operated production machinery according to specific standards and protocols of company.
- Adjusted machine settings for optimal product output.
- Prepared for work to be completed by studying assembly instructions, blueprint specifications and part lists.
- Oversaw production schedule to maximize efficiency.
Education
Certificate - Architectural Construction Drawing & Reading
Allison
04-2025
Certificate - Basics of Welding And Jointing
Alison
09-2023
High School Diploma -
Orange County Department of Education
01-2016
Skills
- Finishing chemicals and materials knowledge
- Strong Work Ethic
- Production processes analysis
- Safety regulations compliance
- Lean Manufacturing Processes
- Some management functions
- Root cause analysis, problem solving
- Attention to detail
- Heavy lifting 80lb
- Team Development
- Quality Control
- Production Processes Knowledge
- Safe machine operation
- Machine Operation
- Component assembly
- Positive attitude
- Strategic planning capabilities
- Cross-functional team leadership
- Data-driven decision-making
- Training and Coaching Abilities
- Reading and determining measurements
- Incident reporting
- Following Instructions
- Good communication
- Materials Assembly
- Multitasking
- Active listening
- Inventory and stocking
- Equipment maintenance
- Production Operations
- Pallet jacks and forklift knowledge
- Supply organization
- Analytical thinking
- Production Error Correction
- Professionalism
- Equipment Operation
- Self-motivation
- Goal-oriented
- Turret operations
- Stick-weld fabrication
- Borosilicate glass-blowing knowledge
- Mechanically inclined
- Vehicle Maintenance/Repair
- Minor construction
- Building relocation
- Limited plumbing and electrical knowledge
- Blueprint Comprehension
Affiliations
- Organizing and cleaning up my household work-space
- Building projects for my wife
- Maintenancing/Repairing household vehicles
- Spending time with my kid
- Taking online courses to improve knowledge
Certification
Basics of welding and jointing (September, 2023)
Basics of architectural construction drawing & reading (April, 2025)
References
References available upon request.
Education and Training
other
Timeline
Flexographic Printing Press Operator
Blue Stone Label
06.2024 - 04.2025
Digital Finisher
Brook + Whittle
10.2023 - 06.2024
Digital Finisher
Brook + Whittle
01.2022 - 10.2023
Flexographic Narrow Web Press Operator
Apparel Star Label Co.
09.2021 - 01.2022
Flexographic Lead
Abbott Label
10.2016 - 06.2021
Certificate - Architectural Construction Drawing & Reading
Allison
Certificate - Basics of Welding And Jointing
Alison
High School Diploma -
Orange County Department of Education
Similar Profiles
Sihle NdlovuSihle Ndlovu
Head: IT Governance, Risk and Compliance at Blue Label TelecomsHead: IT Governance, Risk and Compliance at Blue Label Telecoms
Caleb RamseyCaleb Ramsey
Finishing Press Operator at Blue Label PackagingFinishing Press Operator at Blue Label Packaging
Makwande MkhabeleMakwande Mkhabele
Juniour Cashbook Controller at Blue Label TelecomsJuniour Cashbook Controller at Blue Label Telecoms
Katie LongKatie Long
Child Protective Services Caseworker at State of TennesseeChild Protective Services Caseworker at State of Tennessee
David TrejoDavid Trejo
Order Selector at Performance FoodserviceOrder Selector at Performance Foodservice