Summary
Overview
Work History
Education
Skills
Timeline
Generic

Elijah Guillory

Leander,TX

Summary

I'm a hardworking problem solver. I pride myself in always completing the job, and I love to learn and teach. I'm a leader and I believe that leaders are servants first and foremost. Im looking forward to joining a groundbreaking company and or being promoted WITHIN a company, as well as shaping the future.

Overview

5
5
years of professional experience

Work History

Equipment Maintenance Technician

Tesla
Pflugerville, TX
10.2022 - 11.2023
  • Performed troubleshooting duties to determine cause of equipment failures.
  • Maintained, tested and assembled over multiple pieces of equipment weekly.
  • Operated test meters and soldering equipment to replace electrical components and wiring.
  • Observed safety protocols and farming best practices to maximize performance and prevent unnecessary production delays.
  • Installed and maintained irrigation systems using troubleshooting to diagnose and resolve problems.
  • Inspected equipment and made repairs and replacements.
  • Interpreted equipment manuals and blueprints and explained procedures to team.
  • Noted and filed new installations, repair procedures and maintenance procedures completed.
  • Used troubleshooting methods to identify issues with mechanical tools.
  • Eliminated machine defects by recommending operational adjustments.
  • Researched, designed and installed mechanical products or equipment to meet requirements.
  • Mentored and coached junior staff members by giving positive feedback and constructive criticism.
  • Recommended design modifications to eliminate machine or system malfunctions.
  • Created Multiple MIs and procedures for a better foundational understanding of the equipment/machine
  • Conferred with engineers to implement operating procedures, resolve system malfunctions or provide
  • Created multiple MI procedures to help with certain recovery processes along the PM winding line. (OPs 32-39, OP 65, OP 70/71 laser cooling units).
  • Created a passdown format for the bender side to better organize fault patterns, downtimes, and to formalize a better understand of machine operation
  • Wrote performance requirements for product development or engineering projects.
  • Kept work areas clean, neat and free of hazards.
  • Troubleshot issues and developed effective solutions.
  • Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
  • Completed semi-skilled and skilled work under supervision of fully qualified professionals.
  • Troubleshot, tested and remedied issues before software deployment.
  • Maintained strong education in latest technologies, software and hardware products for use in various projects.
  • Performed basic equipment repairs and replaced parts.
  • Planned and completed group projects, working smoothly with others.
  • Understood and followed oral and written directions.
  • Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
  • Maintained updated knowledge through continuing education and advanced training.
  • Displayed strong TEAMS etiquette, communicating effectively and handling difficult calls.
  • Motivated and encouraged team members to communicate more openly and constructively with each other.
  • Created equipment passdown formats to better organize and formalize our daily reports to hand to shifts.
  • Trained majority of our techs with the use of flux, (preventative maintenance reports) ordering spare parts, SPC (Machine data upkeep) , and the proper method of performing preventative maintenance on a variety of different machinery along the PM winding line (TESLA Stator).
  • Trained current oprators who were selected to train under experienced ET personnel.
  • Prevented potential confrontations amongst other techs and communicated fairly with both parties on how to properly communicate and de-escalate the situation.

Equipment Maintenance Technician

Tesla
Austin, TX
02.2024 - Current
  • Performed preventive maintenance tasks, including lubrication and cleaning of machines and equipment.
  • Operated hand and power tools to complete repairs.
  • Conducted electrical repairs on motors, lighting systems, and other related components.
  • Cleaned work areas to maintain a safe environment free from debris or hazardous materials.
  • Responded to personnel queries and troubleshooting requests to provide repair services to improve operations.
  • Routinely inspected equipment for preventive and emergency maintenance needs.
  • Dismantled machines, equipment, or devices to access and remove defective parts.
  • Assembled, installed or repaired electrical or electronic components and pipe systems.
  • Planned and laid out repair work using diagrams, drawings or schematic diagrams.
  • Troubleshot robotic system problems and identified root cause of issues.
  • Configured robots according to customer requirements utilizing appropriate software tools.
  • Repaired robotic equipment and performed troubleshooting to resolve robotic system issues.
  • Did KUKA certified Robotics classes, Trained other technicians on the basics of robotic movement.
  • Foundational understanding of the robotic jogging coordinate system.
  • Established and created daily equipment reports
  • Removed and replaced malfunctioning circuit boards and sensors.
  • Performed maintenance on mechanical systems such as pneumatics, hydraulics, conveyors, pumps and gearboxes.
  • Basic understanding of FANUC robots, Coordinate systems, Robot controllers.
  • Performed daily maintenance checks on scanner equipment to ensure proper functioning.
  • Conducted periodic tests to evaluate scanner performance, speed, and accuracy levels.
  • Cleaned, inspected and tested air cylinders according to safety regulations.
  • Maintained records of cylinder cleaning and testing activities.
  • Inspected valves for proper functioning and replaced them when needed.

Electrician (Crew Leader)

Berg Electric
Austin, TX
09.2021 - 10.2022
  • Performed rough-in, termination and underground work.
  • Traced and diagnosed electrical malfunctions using hand tools and test equipment.
  • Corrected issues and installed new fixtures, wiring, circuits and motors.
  • Dug trenches and created holes to pull conduit and install supports.
  • Troubleshot issues and developed effective solutions.
  • Completed semi-skilled and skilled work under supervision of fully qualified professionals.
  • Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.
  • Supported clients, interpreting drawings, wiring diagrams, flow charts and project requirement descriptions to confirm correct electrical component hook-up for optimal results.
  • Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
  • Installed and maintained breaker panels for commercial and residential buildings.
  • Installation of high volt and low volt electrical systems, such as transformers, electrical panels, VAVs, ETC.
  • Completed wire terminations, understood electrical blueprint interpretations and completed system installations.
  • Worked extensively on three-phase, 277/480 volt power distribution systems.
  • Interpreted blueprints and technical drawings to correctly assemble panels and control boxes.

Electrician

Weifield Group
Austin, TX
08.2019 - 07.2021
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers and transformers.
  • Traced and diagnosed electrical malfunctions using hand tools and test equipment.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
  • Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
  • Assessed, tested and operated variety of electrical components and systems.
  • Planned and installed complicated circuit systems in both commercial and residential construction.
  • Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.
  • Interpreted blueprints and technical drawings to correctly assemble panels and control boxes.
  • Participated in pre-construction meetings to negotiate prices, terms of sales and service agreements.
  • Leveraged drawings and manuals to design and implement electrical systems for new installations.

Engineering Technician

Flex
Austin, TX
10.2023 - 01.2024
  • Assisted in the design, development and implementation of new engineering projects.
  • Conducted research to develop and improve engineering processes and products.
  • Performed tests on prototype designs to evaluate product performance.
  • Collaborated with engineers to ensure accuracy in specifications, tolerances, safety requirements.
  • Developed maintenance plans for manufacturing facilities and equipment.
  • Created detailed work instructions for assembly line personnel based on established engineering protocols.
  • Leveraged outstanding communication, interpersonal and people skills to work well with clients.
  • Performed diagnostics and testing to locate root causes and resolve issues for optimal performance.
  • Improved electrical installations by standardizing procedures for production and field personnel.
  • Tested performance of in-development parts, assemblies and systems under simulated operating conditions to optimize plans.
  • Provided technical support during the installation of new equipment.

Education

Electrical Apprentice - Electrical Equipment Installation And Repair

Skillpoint Alliance
Austin, TX
06.2019

High School Diploma -

Mcneil High School
Austin, TX
05.2019

Electrician - Electrical

IEC (Independent Electrical Contractors)
Austin, TX

Skills

  • Attention to Detail
  • Parts Fabrication
  • Wire Insulation
  • Lock Out-Tag Out Procedures
  • Scaffolding and Ladder Work
  • Appliance Installation
  • Repair Planning
  • Worker Training
  • Job Specifications Reading
  • Electrical Wiring and Fixtures
  • Field Sketching
  • Installation Management
  • Blueprint Reading
  • Conduit and Pipe Laying
  • Can work with difficult people
  • Grounding Installation
  • Hand and Power Tools
  • Electrical Systems Testing
  • Electrical Safety
  • High Voltage Termination
  • Blueprint and Schematic Interpretation
  • Circuits and Wiring
  • Layout Planning
  • Hand and Power Tool Operation
  • Local Codes Compliance
  • Troubleshooting and Diagnostics
  • Equipment Maintenance
  • Active Listening
  • Team Building
  • Training & Development
  • Critical Thinking
  • Good Work Ethic
  • Friendly, Positive Attitude
  • Equipment Repair
  • PPE Use
  • Team Management
  • Supervision & Leadership
  • Problem Resolution
  • Conflict Resolution
  • Organizational Skills
  • Planning & Organizing
  • People Skills
  • Power Tools Operation
  • Mechanical Troubleshooting
  • Hand Tools Proficiency
  • Electrical Diagnostics
  • Equipment Installation
  • Machine Repair

Timeline

Equipment Maintenance Technician

Tesla
02.2024 - Current

Engineering Technician

Flex
10.2023 - 01.2024

Equipment Maintenance Technician

Tesla
10.2022 - 11.2023

Electrician (Crew Leader)

Berg Electric
09.2021 - 10.2022

Electrician

Weifield Group
08.2019 - 07.2021

Electrical Apprentice - Electrical Equipment Installation And Repair

Skillpoint Alliance

High School Diploma -

Mcneil High School

Electrician - Electrical

IEC (Independent Electrical Contractors)

Similar Profiles

CREATE PROFILE
Elijah Guillory