Elmer Torres
Bakersfield,CA
Summary
Dynamic Maintenance Technician with extensive experience at California Dairies, Frito Lay, and Califia Farms excelling in mechanical and electrical troubleshooting. Proven ability to lead projects, implement preventive maintenance, and enhance operational efficiency. Proficient in PLC systems and skilled in welding techniques, demonstrating strong problem-solving abilities and a commitment to safety in high-pressure environments.
Overview
9
9
years of professional experience
Work History
Maintenance Technician III
California Dairies
Bakersfield, CA
09.2024 - Current
- Worked in a senior mechanic position training new technicians and operators in a start up company
- Worked with management to create and implement new job hazard analysis, standard operating procedures and cmms system for new plant
- Installed all new equipment in facility such as fillers, case packets, conveyors, accumulators, dust collector, centrifuge and piping for plant
- Lead project for case packing room, used P&IDs to install case packing equipment and conveyors. Also used wiring diagrams to install high voltage panels and installed cable tray and lead high voltage cables and conduit to sub panels and disconnects for case packers.
- Used wiring diagrams to wire in all low voltage control power to subpanels from plc panel.
- Used P&IDs to install piping for airlines going to all our machines from the main air header coming from the air compressors.
- Used P&IDs to to install water lines for accumulators and sinks
- Installed all airlines for wastewater management system
- Installed all air ducting for new dust collector system for dry blending warehouse
- Troubleshooting 3 phase electrical systems using volt meters, meggers and amp meters.
- Installation of all CATIV cable for communication to panels coming from server system.
- Installation of IDFs for plant communication.
- PLC troubleshooting to ensure communication from all machinery.
- Troubleshooting I/O interface from PLCs
- Installation of motors and pumps and using knowledge of 3 phase electrical systems to ensure motors are wired in correctly.
- Troubleshooting and programming VFDs for motors
- Knowledge of chemical safety used in machinery cleaning.
- Proficient in fabrication using TIG, MiG and stick welders
- Fabricated frames for chemical storage and used sanitary welding method to fabricate piping for food processing.
- Troubleshooting of mechanical systems including pumps, conveyors, centrifuges, case packers, fillers, robots and pallet wrappers
- Troubleshooting of cranes on our ASRS
- Used wiring diagrams to wire in electrical buckets in our MCC rooms
- Operated varied hand and power tools to complete repairs.
- Used problem-solving skills to alleviate issues efficiently with minimal supervision.
- Followed work orders and specifications for machine and equipment replacement, repair, or maintenance.
- Followed safety protocols to minimize workplace accidents.
- Completed daily, weekly, and monthly checklists on building equipment to maintain records of scheduled maintenance procedures.
- Successfully completed complex repair tasks within tight deadlines, minimizing disruptions to daily operations.
Industrial Maintenance Mechanic
Frito Lay
Bakersfield, CA
01.2020 - 09.2024
- Worked on 3-phase electrical systems.
- Used electrical knowledge to troubleshoot electrical buckets, disconnects, and VFD's
- Took on big projects such as full rebuilds of conveyors, fryers and ovens.
- Repaired broken metal parts, fabricated new parts, and assembled new equipment.
- Maintained and troubleshot all conveyors in plant.
- Troubleshot PLC issues
- Used RSLogix 5000 to troubleshoot plc issues
- Skilled in machining new parts using equipment such as the lathe, mill, brake, drill press and different types of saws.
- Proficient in using tig, mig and stick welder to repair equipment or create new parts.
- Used troubleshooting skills to assess both mechanical and electrical issues on equipment.
- Used leadership skills to work with crew and create better and faster ways to complete jobs.
- Troubleshot steam system including boiler, valves, and steam traps
- Examined parts for defects, such as breakage, and excessive wear.
- Used meter to trouble shoot electrical panels and electrical buckets.
- Replaced broken and malfunctioning components of machinery and equipment.
- Studied blueprints or manufacturers' manuals to determine correct installation or operation of machinery.
- Lubricated and adjust parts, equipment, and machinery.
- Observed and tested operation of machinery and equipment to diagnose malfunctions, using voltmeters, and other testing devices.
- Disassembled machinery and equipment to remove parts and made repairs.
- Reassembled equipment after completion of inspections, testing, and repairs.
- Maintained operating condition of industrial production and processing machinery and equipment.
- Demonstrated equipment functions and features to machine operators.
- Analyzed test results, machine error messages, and information obtained from operators to diagnose equipment problems
- Identified ways to improve efficiency in operations and implemented process changes
- Assisted in maintaining inventory of spare parts and tools, minimizing delays due to lack of necessary resources for repairs.
- Calibrated and adjusted machinery for operational consistency.
- Operated hoists, cranes and power tools to disassemble devices and remove defective parts.
- Safeguarded employee safety by adhering to OSHA regulations and enforcing company safety policies within the workplace.
- Educated production workers on routine preventive maintenance techniques and monitoring compliance.
- Performed root cause analysis on recurring equipment failures, implementing corrective actions to prevent future occurrences.
- Enhanced production efficiency by troubleshooting, diagnosing, and repairing mechanical issues in a timely manner.
Entry Level Maintenance Mechanic
Califia Farms LP
Bakersfield, CA
02.2019 - 01.2020
- Learned how to troubleshoot 3-phase electrical systems.
- Worked on 3-phase motors, pumps, valves, level sensors and conveyors
- Used electrical knowledge to troubleshoot electrical buckets, disconnects, and VFD's
- Worked on 110v single phase electrical systems when working on facility and auxiliary power.
- Took on big projects such as full rebuilds of conveyors, homogenizers, and pasteurizers.
- Worked on steam systems and troubleshot boiler when necessary.
- Experience with FOGG fillers, Tetra Pak pasteurizers, palletizers, Douglas case packers, steam powered bottle sleevers and Alfa laval skids.
- Dismantled, repaired, or replaced devices using hand tools and power tools.
- Executed troubleshooting and repaired malfunctions in mechanical and electrical systems.
- Worked on glycol system and troubleshot ammonia compressors
- Worked with engineers to create recipes and install correct parameters for new equipment
- Performed electrical and mechanical repairs of production equipment to minimize downtime.
- Troubleshot equipment breakdowns and performed preventive maintenance.
- Maintained accurate records for all repairs, upgrades, and preventative measures taken on various equipment types.
- Communicated effectively across departments regarding upcoming maintenance plans or urgent repairs needed, fostering a collaborative work environment.
- Expedited emergency repair situations, minimizing production delays due to unforeseen breakdowns or malfunctions.
Processing Team Lead
Califia Farms LP
Bakersfield, CA
03.2016 - 02.2019
- Oversaw pasteurizers and batch blenders
- Coordinated with blenders and quality technicians in order to ensure batches were made correctly and in a timely manner.
- Ran pasteurizers and monitored parameters to ensure product reached proper temperature to be safe for consumption
- Coordinated with production to make sure all runs were kept on schedule.
- Trained all new incoming operators in process and safety protocols.
- Signed off on all HACCP paperwork and took responsibility for any discrepancies
- Aligned with maintenance to ensure repairs are done in a timely manner and follow all sanitation protocols.
- Experience with FOGG fillers, Tetra Pak pasteurizers, palletizers, Douglas case packers, steam powered bottle sleevers and Alfa laval skids.
- Enhanced processing efficiency by streamlining workflow and implementing innovative solutions.
- Implemented quality control measures, resulting in reduced error rates and increased accuracy across all tasks.
- Proactively identified potential bottlenecks or challenges in the processing pipeline allowing for pre-emptive resolution.
- Collaborated closely with management to identify staffing needs, recruit new talent, and build a cohesive team environment.
- Led a team of processors, ensuring accurate and timely completion of tasks.
- Managed multiple projects simultaneously while adhering to strict deadlines and prioritizing tasks effectively.
Education
High School Diploma -
Cesar E. Chavez High School
Delano, CA05.2011
Skills
- Preventive Maintenance
- Mechanical troubleshooting
- Electrical troubleshooting
- Mechanical repair
- Equipment installation
- Equipment Repair
- Plumbing
- Lockout and tagout procedures
- HVAC systems
- Industrial equipment
- Hydraulic systems
- 3 phase electrical
- Troubleshooting 480v, 270v, 110v systems
- Troubleshooting low voltage control systems
- MiG welding
- TIG welding
- Sanitary welding
- Mill
- Lathe
- Hydro press shear
- Brake
- Forklift
- Boom lift
- Scissor lift
- Reading wiring diagrams, blueprints and P&IDs
- PLC
- Lock out tag out
Languages
Spanish
Native or Bilingual
English
Native or Bilingual
Timeline
Maintenance Technician III
California Dairies
09.2024 - Current
Industrial Maintenance Mechanic
Frito Lay
01.2020 - 09.2024
Entry Level Maintenance Mechanic
Califia Farms LP
02.2019 - 01.2020
Processing Team Lead
Califia Farms LP
03.2016 - 02.2019
High School Diploma -
Cesar E. Chavez High School