Emmanuel Colon
Rochester,NY
Summary
Experienced and efficient telecommunications professional knowledgeable about installing and maintaining infrastructure and customer systems. Pulls new cable, test functionality and achieve proper signal strength with effective balance of impedance and amplification. Excellent customer service and time management abilities developed over 6-year history in technical positions. Skilled tradesman with experience in multiple fields including carpentry, electrical work, and plumbing. Known for problem-solving abilities, technical knowledge, and commitment to safety standards. Demonstrated leadership skills managing teams on construction projects, ensuring efficiency and quality workmanship. Proven track record of completing jobs on time and within budget while adhering to strict industry regulations.
Overview
16
16
years of professional experience
1
1
Certification
Work History
Trim Carpenter
MJohnson construction
Rochester, NY
08.2024 - 10.2024
- Measured, cut and installed baseboards, casing, crown moldings and other trim elements.
- Installed window sills, headers, door frames and jambs to specifications.
- Filled nail holes with putty or spackle to ensure a smooth finish on the trim work.
- Installed interior doors using shims to level them properly.
- Removed existing trim elements prior to remodeling projects while protecting adjacent surfaces from damage.
- Maintained cleanliness of job sites throughout the duration of projects.
- Collaborated with other tradespeople on multi-phase construction projects.
- Properly installed kitchen and bathroom cabinets and removed all debris upon job completion.
Service Technician
REIMER HEATING
Buffalo, NY
10.2023 - 03.2024
- Managed service calls and sales opportunities efficiently
- Resolved heating issues via troubleshooting techniques
- Ensured accurate measurement of gas levels through regular inspections
- Ensured accurate measurements of static pressure in system
- Evaluated escalating temperatures
- Implemented air humidifier to optimize ambient moisture levels
- Conducting inspections on primary and secondary exchangers
- Conducted inspections of ignition and flame sensor.
- Maintained optimal performance of inducer motor.
- Conducted regular inspections on blower motor amp.
Painter
Rochester New York Painters
Rochester, NY
05.2023 - 10.2023
- Maintained a clean and safe working environment by sweeping, mopping, and disposing of paint waste properly.
- Applied primers, sealants and finishes to walls according to specifications.
- Loaded and unloaded ladders onto work sites safely.
- Assisted with painting interior and exterior structures including baseboards, door frames and window frames.
- Strhed drop cloths around furniture before beginning painting tasks.
- Repaired cracks in drywall prior to painting them.
- Set up scaffolding around buildings when necessary for high-reaching areas.
- Applied paint with brushes, rollers, spray guns or other equipment;.
- Cleaned up job sites after completion of projects;.
- Inspected painted surfaces for defects such as cracking, blistering or fading;.
- Assessed work areas to determine safety measures required before beginning job;.
- Used ladders and scaffolds to reach high walls and ceilings;.
- Sanded woodwork prior to staining or painting;.
- Repaired cracks in drywall prior to painting or wallpapering rooms;.
Fiber Optic Splicer
Empire Access
Prattsburgh, NY
02.2022 - 05.2023
- Installed, tested and maintained fiber optic cables in both aerial and underground environments.
- Terminated and spliced single-mode and multi-mode fibers using fusion splicing techniques.
- Performed troubleshooting and repair of fiber optic networks including OTDR testing.
- Maintained records of repairs, calibrations, and tests performed on equipment.
Fiber Optic Splicer
R O Communications
Rochester, NY
08.2021 - 02.2022
- Strung cables between structures, poles and towers with the proper tension to prevent sagging
- Performed installation work inside, outside and at heights to deliver best possible service to customers
- Installed, connected and tested the Fiber fittings equipment for new customers
- Followed established guidelines and procedures
- Insulated conductors and sealed splices were implemented to enhance system durability and safeguard against moisture.
TCF Foreman
Ericsson
Charlotte, NC
05.2019 - 10.2020
- Call tested cell sites with a band locking phone
- Created rigging plans using Rigging calc to ensure load is safely rigged to tower under the MBS
- Trouble shot and cleared alarms, vswr, and assis
- Performed QC duties to maintain construction job site safety and efficiency
- Oversaw inventory control processes, production schedules, and staffing to ensure projects were completed on-time and within budget
- Supervised team crew members to maintain compliance with client specifications and regulatory safety mandates, including OSHA
- Assisted project planning and assessed potential conflict to meet established timeline deadlines
- Controlled budgets and approved overages for materials and resources to meet production goals
- Achieved exceptional results in site grading and operating multiple pieces of equipment in safe and efficient manner
Tower Technician
MasTec Network Solutions
Fort Mill, SC
09.2013 - 12.2018
- Implemented company policies, technical procedures and standards for preserving the integrity and security of data, reports and access
- Call tested cellar sites with band locking phone
- Performed troubleshooting and repair for Attn and telecommunications technology
- Performed job safety analysis on a daily basis to mitigate risks for all workers and visitors to job sites
- Identified issues with antenna system components and applied troubleshooting techniques
- Reviewed blueprints, specifications and drawings to fully understand the project scope ahead of time
- Tracked all company assets, including trucks, safety kits, test equipment and supplies
- Assisted workers with the installation of RF components, which included antennas and duplexers
- Supported technicians in equipment maintenance and repair
- Accurately completed service reports and warranty forms
- Prepared and cleaned construction sites by removing debris
- Met production goals by maintaining cost effective levels of spare parts inventory
- Repaired wiring, plumbing, equipment, and machinery
- Followed standards and procedures to maintain safe work environment
- Used hoists and cranes to lift work pieces to machine
- Collaborated with tower and civil to ensure smooth work flow and efficient organization operations
- Maintained product quality by analyzing feedback, managing integration, and performing continual tests
Project Supervisor
GCA Services Group Inc
Rochester, NY
10.2011 - 09.2013
- Oversaw warehouse staff and maintained efficiency in a fast-paced environment
- Established and maintained clean and comfortable environments in warehouse buildings by vacuuming, cleaning windows and dusting
- Worked with building managers to assess ongoing needs and plan preventive maintenance and cleaning schedules
- Promoted building security by locking doors and checking electrical appliances for safety hazards
- Stripped and refinished hard surface floors to maintain quality condition and appearance
- Collected trash for disposal in garbage and recycling receptacles and replaced bin liners
- Followed procedures for use of chemical cleaners and power equipment to prevent damage to floors
- Cleaned restrooms, including urinals and toilets, sinks, counters and mirrors with sanitizing products to alleviate germs
Lab Optician
Rochester Optical
Rochester, NY
01.2009 - 09.2011
- Read and filled prescriptions for eyeglasses and contact lenses
- Took measurements such as pupillary distance, ocular center and segment heights
- Completed both warranty and non-warranty frame repairs for customers
- Updated display frames with the newest styles
- Made targeted suggested to patients based on facial parameters and stated preferences
Education
GED -
West irondequoit
Irondequoit, NY06.2004
Skills
- Excel spreadsheet
- Photo resizing
- Call testing
- Data entry
- OSHA 30
- Basic computer skills
- Tower crew oversight
- RF awareness knowledge
- Training and mentoring
- Issue resolution
- Company safety policies
- Strong written and verbal communication skills
- General math skills
- Fiber optics experience
- Telecommunication
- Project Planning
- Project Management
- Electrical Experience
- Construction Management
- Blueprint Reading
- Plumbing
- Customer service
- Sales
- Quality assurance
- Mechanical knowledge
- HVAC
- Service Technician Experience
Certification
- OSHA 30, 02/01/26
- OSHA 10
- Driver's License, 02/01/26
Timeline
Trim Carpenter
MJohnson construction
08.2024 - 10.2024
Service Technician
REIMER HEATING
10.2023 - 03.2024
Painter
Rochester New York Painters
05.2023 - 10.2023
Fiber Optic Splicer
Empire Access
02.2022 - 05.2023
Fiber Optic Splicer
R O Communications
08.2021 - 02.2022
TCF Foreman
Ericsson
05.2019 - 10.2020
Tower Technician
MasTec Network Solutions
09.2013 - 12.2018
Project Supervisor
GCA Services Group Inc
10.2011 - 09.2013
Lab Optician
Rochester Optical
01.2009 - 09.2011
GED -
West irondequoit
Similar Profiles
VANESSA MILLERVANESSA MILLER
Professional Services Consultant at The Blue Book Building & Construction Network/Dodge Construction NetworkProfessional Services Consultant at The Blue Book Building & Construction Network/Dodge Construction Network
Tomorn METHTomorn METH
Draftsman at Peng Sour Construction Co., Ltd _(Project: Road Rehabilitation and Construction )Draftsman at Peng Sour Construction Co., Ltd _(Project: Road Rehabilitation and Construction )
Francis di GraziaFrancis di Grazia
CAPENTER FOREMAN at Kelly Pacific Construction/ TO JOHN MARTIN CONSTRUCTIONCAPENTER FOREMAN at Kelly Pacific Construction/ TO JOHN MARTIN CONSTRUCTION
Kamaria EllisKamaria Ellis
PCA at Always Compassionate HealthcarePCA at Always Compassionate Healthcare
Andrew HeiseAndrew Heise
Recreation Attendant at Town of GreeceRecreation Attendant at Town of Greece