ENOCH T. ECHOLS

• Participated in the Canes installation onboard the USS GEORGE WASHINGTON CVN-73.
• Took over as the no.2 to the electrical foreman. Assuming the foremans' duties when needed.
• Managed workflow and productivity of lower-level technicians to keep projects on task.

• Worked onboard the USS GORGE WASHINGTON CVN-73 helping to close out spaces doing whatever was needed to complete install.
• Participated and became the deck plate electrical lead for the SSDS install onboard the USS CARL VINSON CVN-70.
• Oversaw all of the pre-testing cold checks of all circuits prior to energizing sytem.

Electrician Specialist

Epsilon Systems Solutions, Inc

· experience in repair, maintenance, modification, removal, installation, and overhaul of shipboard electrical, HVAC, ventilation, cable installation, and connector installation of US Navy communications equipment.

· experience in all aspects of the installation process with the exception on welding.

· held all certification pertaining to conventional / bof fiber installation including blowing of the fiber and testing.

· experienced painter (brush/roll/spray), lagger, some fitting, mct builder.

· lead man on the USS CARTER HALL LSD-50 for the Canes installation.

· Participated in the Admacs installation on the USS BUSH CVN-77 & USS JOHN C.

STENNIS CVN-74.

· participated in the Steering Gear rip-out and installation on USS TRUMAN CVN-75, USS STENNIS CVN-74, USS CARTER HALL LSD-50.

· Installed cables for the ALSS (low light cameras) on the USS TORTUGA LSD-46.

· Pulled all fiber and bof tubing and blew all fiber for the steering gear installations on the USS STENNIS CVN-74, and the USS TRUMAN CVN-75.

• Deck plate lead for the canes installation onboard the USS CARTER HALL LSD-50
• Participated in the ADMACS installation onboard the USS BUSH CVN-77 and the USS STENIS CVN-74. Pulling, terminating, connecting copper and fiber cables.
• Participated in the rip out and installation of the aft steering installation onboard the USS STENNIS CVN-74, USS TRUMAN CVN-75, USS CARTER HALL LSD-50.
• Installed cables for the ALSS(low light cameras) onboard the USS TORTUGA LSD-46.
• Hold all fiber certifications. installed the fiber for the USS TRUMAN CVN-75 and the USS STENNIS CVN-74, Pulled the conventional and bof tubing. Blew all of the blown fiber for the aft steering installs on the USS STENNIS and the USS TRUMAN.
• Part of the fiber testing team on the USS STENNIS CVN-74.
• 
  

• Participated in the HME installation onboard the USS CAPE ST. GEORGE CG-71.
• Deck plate lead for the HME testing onboard the USS CHOSIN CG-65. Performed testing that was assigned to us as well as providing assistance to NAGS and ISEA with their testing.
• Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
• Assumed the foreman's' duties when needed. Duties included deciding which tests to perform, reporting and tracking the progress to TEST COORDINATOR, OSICS, FOREMAN, & PROJECT MANAGER. Coordinated with the ship to see what test could be performed daily.

• Pulled cables for power and communication systems onboard the USS PORTER DDG-78.
• Rebuilt MCTS/MCPS
• Pulled cables for power and communication systems.
• Involved with the testing of the cables prior to energizing numerous systems

• Participated in various pump installs, FADAC Upgrades.
• Involved in the removal, refurbish, and re- installation of flight deck lights and speakers onboard the USS IWO JIMA LHD-7, USS WASP LHD-1, & the USS NEW YORK LPD-21.

• Participated in the troubleshooting, repair, and installation of communication, thermal, smoke,and flood sysytems.

Electrician Tech

Global Services Corp

· participated in the repair, maintenance, modification, removal, installation, and overhaul of shipboard electrical, HVAC, ventilation, cable installation, and connector installation of US Navy communications equipment.

· participated in the major upgrades, overhauls, and installations within shipyards and industrial environments which include the installation of HVAC units on the USS Enterprise (CVN 65) and the USS Dwight D.

· Eisenhower (CVN 69) I also participated in the wiring for system power for TFCC Video upgrade, B&A, CVIC MOD, IWCC, and various other shipboard installs.

· in charge of all material warehousing, pick-up, delivery, and inventory of all AIRLANT materials during all AIRLANT installs.

· sprayed out all of the Ready Rooms and fan rooms associated with HVAC install.

· Ran cat-5 and fiber, set up drop boxes, wired connection boxes, built fiber/ cat-5 connectors, in connection boxes and at the backbone while working the GIG-E BACKBONE UPGRADE on multiple marine air stations.

· Participated in the installation of SSM SYSTEM (camera /door alarms) on board MSC Ships.

· began as a material handler and subsequently promoted to Electrician Tech 3.

· experienced in repair, maintenance, modification, removal, installation, and overhaul of shipboard electrical, HVAC, ventilation, cable installation, and connector installation of US Navy communications equipment.

· participated in the major upgrades, overhauls, and installations within shipyards and industrial environments, Including AN/SLQ-32 install on the USS JOHN F.

· KENNEDY CV-67, IT-21 upgrades on the USS Enterprise (CVN 65), and the installation of HVAC units on the USS Enterprise (CVN 65) and the USS Dwight D.

· Eisenhower (CVN 69) I also participated in the wiring for system power for TFCC Video upgrade, B&A, CVIC MOD, IWCC, and various other shipboard installs.

· in charge of all material warehousing, pick-up, delivery, and inventory of all AIRLANT materials during all AIRLANT installs including the HVAC install on USS Dwight D.

· Eisenhower (CVN 69).

I sprayed out all of the Ready Rooms and fan rooms associated with HVAC install.

• supervised lead and asbestos removal and the painting of homes and industrial buildings on all of the navy bases and Marine core bases along the east coast.
• Painted walls and other surfaces using traditional and sprayer methods and worked efficiently to complete jobs within required timeframes.

• assisted the lead carpenter in the building of stand-alone garages.

• assembled garage door orders for installers.

• operated the Unimation robots during the ceramic shell dipping process.
• proficient in all of the areas of the ceramic department process and all of the other departments of the aircraft airfoils parts process.

• Maintained and operated the AN/SLQ-32 ESM SURVEILLANCE SYSTEM
• LPO of OW DIVISION onboard the USS DAVID R. RAY DD971.