Overview
Work History
Timeline
Generic

Eric Davenport

Visalia,CA

Overview

22
22
years of professional experience

Work History

Masonry Laborer

Tom Caldwell Construction
Exeter , CA
03.2019 - 01.2024
  • Prepared work sites for jobs and kept areas clean and organized.
  • Used established ratios to mix mortar, plastic and grout.
  • Installed brick and tile and applied grout between joints using trowels.
  • Assessed brick or tile installations for imperfections and corrected problems using additional grouting materials, fillers or adhesives.
  • Used picks and shovels to dig, spread and level dirt and gravel.
  • Completed all repairs and maintenance work to company standards.
  • Operated power tools such as drills, grinders, saws, and trowels.
  • Repaired existing masonry structures by replacing damaged bricks or blocks.
  • Measured and cut bricks, blocks, tiles, and stones using hand tools.
  • Carried heavy building materials such as bricks, blocks, and bags of cement up ladders to work sites.
  • Assisted other tradespeople onsite including electricians and plumbers when needed.
  • Grouted hollow cores of block wall structures with sand-cement mixture.
  • Mixed and poured cement to lay brick, block, and stone walls.
  • Smoothed surfaces of freshly laid brickwork with a trowel or float.
  • Spread mortar or grout on joints between units with a trowel or joint tool.
  • Applied waterproofing materials to exterior masonry surfaces.
  • Cleaned and prepared masonry surfaces prior to construction.
  • Stacked material neatly at job site locations according to instructions from supervisor.
  • Built wood forms for pouring concrete foundation footings and walls.
  • Covered finished masonry structures with protective coatings such as paint or sealant.
  • Kept worksites clean by removing debris at the end of each day's shift.
  • Cut bricks into various shapes using masonry chisels and hammers.
  • Removed excess mortar from joints with a pointing trowel.
  • Erected scaffolding around the work area for support during construction.
  • Used trowels of various sizes and shapes to level and clear away excess concrete.
  • Operated overhead lifts to move heavy and bulky work materials.
  • Formed edges and molded joints with edging tools and jointers.
  • Moved bricks, tools and supplies with equipment such as forklifts and hand trucks.
  • Laid bricks or blocks in the proper configurations according to plans.
  • Applied stains, sealer and curing agents to masonry.
  • Caulked crevices in masonry work for weather-proof seal.
  • Removed broken masonry and constructed replacement sections for walls and floors.
  • Guided large stones onto foundation locations using truck cranes, hoists and skids.
  • Calculated angles and courses and determined vertical and horizontal alignment of courses.

Warehouse Manager

A.E. Carter Distributing
Visalia, CA
06.2002 - 08.2013
  • Organized regular cycle counts of physical inventory to ensure accuracy of system data.
  • Analyzed data from production reports to identify trends or opportunities for improvement.
  • Developed strategies to optimize workflow processes in order to maximize productivity.
  • Communicated regularly with other departments regarding supply chain activities.
  • Conducted regular audits of warehouse operations to identify areas of improvement.
  • Resolved customer complaints related to product quality or delivery issues.
  • Monitored staff performance, identified areas for improvement, and provided training as needed.
  • Established procedures for receiving, storing, handling hazardous materials safely.
  • Maintained up-to-date knowledge of safety regulations and ensured compliance with them at all times.
  • Utilized inventory management software to track stock levels and maintain accurate records.
  • Ensured that all orders were accurately fulfilled in a timely manner.
  • Assisted in recruiting, hiring, onboarding, and managing warehouse personnel.
  • Planned and implemented efficient warehousing systems for incoming and outgoing goods.
  • Read computer-generated move tickets, put-away labels and delivery labels to properly move merchandise.
  • Operated forklifts to fill or empty overhead spaces.
  • Provided information to shipping and receiving personnel regarding inventory stock.
  • Organized warehouse design to maximize space for stock while allowing for high volume traffic zones.
  • Generated warehouse shipping documents, packing lists and invoices.
  • Hired, trained and motivated warehouse staff to meet tight schedules and demanding performance targets.
  • Led warehouse layout optimization projects, improving workflow and space utilization.
  • Oversaw inventory of incoming and outgoing materials based on physical counts and bar-code systems.
  • Restructured warehouse picking locations and reserved slots to achieve maximum employee productivity.

Shipping and Receiving Clerk

Venida Packing
Exeter, CA
  • Assisted in loading and unloading freight from trucks using lift gates or ramps, dollies, hand trucks or other equipment as necessary.
  • Monitored merchandise received and shipped from facility in computer system.
  • Checked customer orders, labeling and documentation prior to shipment to avoid delays.
  • Rejected deliveries containing damaged items or shortages and corresponded with shipper to rectify issues.
  • Operated lift and hand trucks to transfer materials to and from target areas.
  • Operated forklifts, hand trucks, or other equipment to load, unload, transport and store goods.
  • Received incoming shipments, verifying quantity and quality of items against purchase orders.
  • Adhered to all safety standards while working with heavy machinery such as forklifts and pallet jacks.
  • Processed outbound shipments, including packing and labeling products for delivery.
  • Prepared invoices for customers, ensuring accuracy prior to shipment.

Pest Control Technician

San Joaquin Pest Control
Visalia, CA
  • Mixed chemicals according to label directions in order to create effective solutions for treating pests.
  • Completed detailed reports after each job detailing the work completed along with any recommendations made.
  • Provided recommendations on how best to reduce future pest infestation problems through preventive measures like exclusion methods and habitat modification.
  • Diagnosed pest issues based on observed evidence such as droppings, tracks or nests.
  • Ensured compliance with all applicable federal, state and local regulations governing the use of pesticides.
  • Installed traps around buildings to capture rodents and other animals that may be causing damage or health hazards.
  • Conducted interior and exterior applications of insecticides, herbicides, rodenticides, growth regulators and other products using hand or power sprayers, dusters and foggers.
  • Identified potential entry points for pests and sealed them off with caulking or other materials.
  • Communicated with customers regarding any safety concerns they may have prior to performing any treatments.
  • Educated customers on proper sanitation practices to help prevent future infestations of pests.
  • Performed inspections of customer premises to assess pest infestations and determine appropriate treatments.
  • Performed follow-up visits to ensure that treatments were successful in eliminating pest problems.
  • Utilized appropriate protective gear and equipment during application.
  • Participated in ongoing training to stay current with new pest control techniques and safety protocols.

Parts Counter Sales Person

Exeter Irrigation & Supply
Exeter, CA
  • Organized shelves and displays to ensure easy access to products for customers.
  • Maintained an accurate inventory of parts in stock, including ordering new items as needed.
  • Processed orders and invoices accurately and efficiently.
  • Adhered to company policies regarding product returns and exchanges, warranties.
  • Assisted customers with locating the correct part for their needs.
  • Performed cashier duties such as receiving payments from customers and issuing receipts.
  • Monitored stock levels regularly to ensure adequate supply of parts in store.
  • Greeted customers and provided excellent customer service.
  • Verified accuracy of orders before shipping them out to customers.
  • Received incoming shipments, checked contents against order forms, sorted items according to type, size or other criteria.
  • Answered phone calls and emails from customers inquiring about parts availability.
  • Received and stocked incoming merchandise, arranging items in correct locations.
  • Kept sales and counter areas organized and clean to give positive first impression to visitors and customers.

Service Technician

Exeter Tire Service
Exeter, CA
  • Replaced worn or damaged tires with new ones according to manufacturer specifications.
  • Ensured that shop area was clean at all times including floors, walls, tools and equipment.
  • Cleaned wheel wells of dirt and grime before installation of new tires.
  • Performed oil changes, lube jobs, filter replacements, and other minor maintenance services on customer vehicles.
  • Repaired punctures and patched tubes as needed.
  • Inspected tires and checked tire pressure to ensure proper inflation levels.
  • Checked all fluid levels including engine oil, transmission fluid, coolant, power steering fluid, brake fluid and windshield washer solvent.
  • Disposed of used oil filters properly in accordance with local regulations.
  • Ensured all safety protocols were followed while handling hazardous materials.
  • Followed safety protocols when handling hazardous materials such as oils or antifreeze.
  • Balanced wheels using a computerized wheel balancer machine.
  • Rotated tires for customers to help improve wear patterns.
  • Applied sealants or lubricants onto threads prior to installing lug nuts onto wheels.
  • Operated lifts in order to raise vehicle off ground for access underneath it.
  • Changed oil, transmission fluid and filters in vehicles.
  • Checked tire pressure and performed tire repairs, installations and maintenance tasks.
  • Rotated tires and checked brakes on vehicles.
  • Completed tire rotations on diverse vehicle makes and models.
  • Managed safe vehicle raising and lowering using hydraulic jacks.

Basketball Coach

Exeter Union High School
Exeter, CA
  • Communicated effectively with parents regarding players' progress or disciplinary issues.
  • Facilitated post-game discussions with teams focusing on areas needing improvement or celebration of successes achieved.
  • Organized off-season conditioning programs focused on strength training and cardiovascular endurance.
  • Developed and implemented practice plans, game strategies, and drills to improve team performance.
  • Instructed players in proper techniques for shooting, dribbling, passing, rebounding, defense and offense.
  • Motivated players to reach their maximum potential through positive reinforcement techniques.
  • Supervised team members during practice sessions and games to ensure safety of all participants.
  • Monitored athletes' academic progress, ensuring they maintained satisfactory grades.
  • Created a positive learning environment that encouraged respect among teammates while fostering an atmosphere of sportsmanship.
  • Adhered strictly to rules and regulations of activities department and district.

Timeline

Masonry Laborer

Tom Caldwell Construction
03.2019 - 01.2024

Warehouse Manager

A.E. Carter Distributing
06.2002 - 08.2013

Shipping and Receiving Clerk

Venida Packing

Pest Control Technician

San Joaquin Pest Control

Parts Counter Sales Person

Exeter Irrigation & Supply

Service Technician

Exeter Tire Service

Basketball Coach

Exeter Union High School

Similar Profiles

CREATE PROFILE
Eric Davenport