Eric Salinas

• Installed electrical systems in industrial equipment and motors.
• Assisted with troubleshooting electrical issues and conducting repairs.
• Maintained tools and equipment to ensure operational efficiency.
• Followed safety protocols to minimize risks during electrical work.
• Collaborated with team members to complete projects on schedule.
• Conducted inspections to verify compliance with safety standards.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
• Utilized hand tools, power tools, and specialized equipment for electrical work effectively.
• Performed troubleshooting to determine issues and appropriate action to complete tasks and provide quality installations.
• Tested electrical systems and components for continuity, current, voltage and resistance.

• Improved safety on job sites, conducting thorough risk assessments before initiating electrical work.
• Followed state and local building regulations based on National Electrical Code.
• Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Tested electrical systems and components for continuity, current, voltage and resistance.
• Maintained a clean and organized work environment, ensuring optimal productivity during electrical tasks.

• Installed and maintained electrical systems according to safety standards and project specifications.
• Supervised team members in executing wiring and installation tasks efficiently.
• Conducted regular inspections to ensure compliance with electrical codes and regulations.
• Coordinated with project managers to schedule work and allocate resources effectively.
• Trained apprentices on best practices for electrical installations and safety protocols.
• Improved team performance through consistent training and skill development for all electricians under supervision.
• Worked closely with architects, engineers, and general contractors to ensure seamless integration of electrical systems within overall project designs.
• Collaborated with other trades to ensure seamless integration of electrical systems in construction projects.

• Repaired and installed new fixtures, wiring, circuits, and motors.
• Completed rough-in, termination, and underground work.
• Verified problems, investigated faults, and troubleshot solutions to enhance installations.
• Installed 120/208 volt systems and 480 volt systems.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters.
• Utilized hand tools, power tools, and specialized equipment for electrical work effectively.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.

• Diagnosed issues and developed effective solutions.
• Enhanced workplace safety through meticulous adherence to electrical codes and regulations during installation processes.
• Collaborated with construction teams to ensure electrical installations were completed according to architectural plans.
• Optimized system performance, upgrading outdated electrical panels and circuits.
• Performed regular maintenance on various types of electrical equipment for enhanced longevity and performance.
• Collaborated with other tradespeople to complete complex projects efficiently and meet deadlines.

• Demonstrated exceptional problem-solving skills in diagnosing complex electrical malfunctions and implementing effective solutions.
• Operated tools according to prescribed safety practices.
• Improved electrical system efficiency by conducting thorough inspections and identifying areas for repair or replacement.
• Strengthened client trust, providing clear and concise explanations of electrical work performed and future maintenance recommendations.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Improved safety on job sites, conducting thorough risk assessments before initiating electrical work.
• Verified problems, investigated faults, and troubleshot solutions to enhance installations.

• Attached power cables to equipment such as electric range and motor.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Fabricated custom and replacement parts according to specifications, using hand tools.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Installed, maintained and repaired electrical wiring, controls and lighting systems.
• Installed and repaired electrical systems, ensuring compliance with safety standards and regulations.
• Conducted routine maintenance on electrical equipment, enhancing reliability and operational efficiency.

• Achieved significant energy savings for clients by implementing energy-efficient lighting and power systems.
• Installed 120/208 volt systems and 480 volt systems and instrument devices.
• Examined electrical units for loose connections and broken insulation.
• Developed practical solutions for various challenges encountered during the installation process resulting in minimal delays.
• Repaired and replaced equipment, electrical wiring and fixtures.
• Inspected transformers and circuit breakers for malfunctions.
• Troubleshot and repaired malfunctioning systems and components.
• Fabricated custom and replacement parts according to specifications, using hand tools.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Installed and repaired electrical systems, ensuring compliance with safety standards and regulations.

• Ensured compliance with local and national electrical codes by diligently adhering to guidelines during all installations and inspections.
• Developed streamlined processes for equipment inspections, resulting in improved accuracy and reduced errors.
• Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment, and handling of materials.
• Strengthened client trust, providing clear and concise explanations of electrical work performed and future maintenance recommendations.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Fabricated custom and replacement parts according to specifications, using hand tools.

• Increased reliability of power distribution networks by adeptly maintaining transformers, switchgear, circuit breakers, and other critical equipment.
• Connected wires to circuit breakers, transformers, and other components.
• Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
• Followed state and local building regulations based on National Electrical Code.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Conducted routine maintenance on electrical equipment, enhancing reliability and operational efficiency.
• Repaired and replaced equipment, electrical wiring and fixtures.
• Inspected transformers and circuit breakers for malfunctions.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Collaborated with team members to troubleshoot electrical issues, minimizing downtime and optimizing workflow.
• Assisted in the implementation of new wiring installations for commercial projects, adhering to project specifications.

• Opened and closed switches to isolate defective relays, performing adjustments or repairs.
• Consulted manuals, schematics, wiring diagrams and engineering personnel to troubleshoot and solve equipment problems and determine optimum equipment functioning.
• Scheduled and supervised splicing or termination of cables in color-code order.
• Repaired, replaced and cleaned equipment and components such as circuit breakers, brushes and commutators.
• Completed preventive maintenance on machines to enhance production and maintain quality.
• Improved safety measures by conducting thorough inspections and addressing potential hazards.
• Installed and maintained high-voltage equipment, ensuring compliance with safety standards.

• Collaborated with team members on troubleshooting and resolving electrical issues efficiently.
• Expedited project timelines through proficient use of power tools, hand tools, and testing equipment in daily tasks.
• Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
• Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
• Terminate 480V motors and 120V Space Heaters.
• Terminate PLC Panels and UPS Panels

• Supervised electrical installations and maintenance for commercial and industrial projects.
• Coordinated scheduling and resource allocation to optimize workflow efficiency.
• Trained and mentored junior electricians to enhance skill development and safety compliance.
• Conducted quality control inspections to ensure adherence to industry standards and regulations.
• Implemented safety protocols, reducing workplace incidents and improving team awareness.
• Ensured safety compliance by implementing and maintaining OSHA regulations throughout all work processes.
• Minimized errors with thorough review of blueprints, schematics, and project specifications before commencing work onsite.
• Oversaw installation, maintenance and repair of power lines, electrical systems, fixtures and appliances.
• Increased client satisfaction by delivering high-quality electrical workmanship that met or exceeded industry standards.
• Facilitated work site safety by applying knowledge of safety protocol and awareness of potential hazards.
• Monitored employee performance and adherence to job specifications to maintain quality standards and high client satisfaction.

● Terminating 480v 3 Phase Motors Stress Cones

● Installing Cable Tray, Supports, Pulling Wires for Instrument, Power Cables.

● Terminating 480v 3 Phase Motors Stress Cones

• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters.
• Utilized hand tools, power tools, and specialized equipment for electrical work effectively.
• Improved electrical system efficiency by conducting thorough inspections and identifying areas for repair or replacement.

• Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Pulling wire, General Punch list items such as Grounding Instrument devices
• Installing Cable Tray, Channel Tray, Supports
• Assisted with troubleshooting electrical issues and conducting repairs.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement, or repair.

● Fabrication of Conduit, Supports For Motors 120v and 480v

● Terminating PIT, LIT, Devices And SDV Valves

• Learned wiring techniques and electrical codes through hands-on experience.
• Inspected worksites and installations to verify compliance with state safety codes.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.

• Supported senior electricians in complex installations and maintenance tasks.
• Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
• Fixed wiring and circuit systems to correct performance issues and safety concerns.
• Installed electrical conduit and wiring for power, controls, and lighting.

● Pulling Wire for Motors, Lights, Instrument Devices

● Underground PVC Conduit, Duct Banks, Grounding

● Fabrication of Conduit, Supports, Lights

● Terminating Lights (480v) Pulling Wire For Lighting

• Conducted preventive maintenance on equipment.

• Maintained safety of electrical work and systems using test meters.
• Adhered strictly to OSHA guidelines when working on potentially hazardous sites which resulted in minimal accidents during my tenure as an Electrician.
• Pulled EMT and PVC conduit wire according to plans and code requirements.
• Spliced, joined and connected wire to accurately install new electrical systems.
• Used hand and power tools to cut, bend and shape wires.
• Connected electrical components and equipment.
• Dismantled and reassembled electrical components as needed.

• Understood and used proper tools and equipment to install and maintain electrical systems.
• Terminated wiring and connected circuits with correct techniques.
• Handled installation of electrical components by splicing, joining, and connecting wire.
• Followed all safety procedures and guidelines to promote safety while working on electrical systems.
• Tested wires and connections using multimeters and other testing devices.
• Handled low-voltage and high-voltage wiring systems.
• Inspected electrical systems for safety and code compliance.
• Pulled RMT and PVC conduit wire according to plans and code requirements.

• Learned new skills quickly by shadowing experienced electricians during complex tasks.
• Adapted quickly to changing project specifications, adjusting work plans as necessary while maintaining a focus on safety and quality.
• Collaborated with team members to complete complex projects within tight deadlines, ensuring top-quality results.
• Tested, troubleshot, and calibrated equipment in shop and field.
• Disconnected and removed motors and pumps.
• Gland cables, Terminate, Bend Conduit, OHM wires.

• Adhered strictly to OSHA guidelines when working on potentially hazardous sites which resulted in minimal accidents during my tenure as an Electrician Top Helper.
• Installed Foil for Heat Trace Cables.
• Installed Cable/ Channel Tray, Junction Boxes
• Terminate cables for PLC cabinets
• Used hand and power tools to cut, bend and shape wires.
• Connected electrical components and equipment.

• Operated hand tools and power equipment safely to complete tasks efficiently.
• Install Fiberglass Cable Tray.
• Install Lights, Terminate Lighting Panels
• Supported fellow electricians in troubleshooting complex problems leading to quick identification of root causes followed by efficient solutions.
• Loaded and unloaded tools, materials and equipment from work trucks and storage containers.
• Pulled RMT and PVC conduit wire according to plans and code requirements.
• Handled low-voltage and high-voltage wiring systems.
• Used hand and power tools to cut, bend and shape wires.

● Install Panels, Terminate Panels, OHM wires, Meg wires.

● Fabricate and Install Cable Tray.

● Terminate cables for PLC cabinets.

● Fabricate and Installed Aluminum Cable Tray

• Connected electrical components and equipment.
• Used hand and power tools to cut, bend and shape wires.

● Terminate Motors, OHM wires.

● Fabricate and Install Plastic-bond pipe

● Install MCC and Switch gears.

● Installed Fire and Gas Junction boxes

• Assisted in the setup of new machinery, ensuring proper electrical connections and functionality.
• Terminated wiring and connected circuits with correct techniques.

• Assisted in installation and maintenance of electrical systems under supervision.
• Conducted routine inspections to ensure compliance with safety standards.
• Supported experienced electricians in troubleshooting electrical issues and repairs.
• Utilized hand and power tools effectively for various electrical tasks.
• Installed 6” Conduit For Underground Work.
• Installed Heaters for Motors and Other Devices.

• Assisted in installation and maintenance of electrical systems, ensuring compliance with safety regulations.
• Collaborated with electricians to troubleshoot and repair electrical issues, enhancing system reliability.
• Utilized hand and power tools for wiring installations, contributing to efficient project completion.
• Supported team in executing electrical upgrades, improving system performance and functionality.
• Installed Conduit For Duct Banks and Other Underground Work.
• Installed Receptacles, Terminated Receptacles
• Installed Light, Terminated Lights, Lighting Panels
• Installed Conduit For Conveyor Systems and Motors.

● Pulled Wire.

● Installed Panels.

• Worked under supervision of journeyman electrician to learn trade and develop electrical knowledge.
• Repaired light fixtures, controls, switches, relays, and circuit breaker panels based on detailed evaluations.
• Fabricate Aluminum Cable Tray and Installed.

● Installed PVC Conduit for Underground Duct Banks

● Bend and Installed PVC Conduit.

● Tie-wire All Underground Rebar.

● Cad-Weld Ground Wire.

• Repaired systems, replaced malfunctioning parts, and supported electrical installations.
• Repaired light fixtures, controls, switches, relays, and circuit breaker panels based on detailed evaluations.
• Utilized hand and power tools for wiring installations, contributing to efficient project completion.

● Fabricate and Installed Aluminum Cable Tray.

● Fabricate and Installed Rigid Conduit.

• Demonstrated strong work ethic by consistently arriving on time, prepared, and ready to contribute to the success of each project.
• Worked in crawl spaces and attics to install wires, and other components.
• Lifted and held components in place for electrician to install.
• Mounted and installed boxes, conduit and strapping for new installations.

• Assisted electricians in installing and maintaining wiring systems.
• Followed exact direction of electricians to help projects move smoothly and avoid unnecessary rework.
• Pulled Wire, Low and High Voltage
• Followed safety procedures to maintain safe work environment.
• Measured, cut and bent conduit.

• Engaged in continuous training programs to enhance skills and knowledge in electrical work.
• Pulled Wire.
• Cad-Weld Ground Wire.

● Installed Roxtec Blocks For Wires.

● Pulled Wire.

• Learned and followed latest electrical codes and regulations to deliver compliant electrical systems.
• Followed state and local building regulations based on National Electrical Code.