Summary
Overview
Work History
Education
Skills
Certification
Timeline
Generic

Ernestine Tso

Phoenix,AZ

Summary

With a proven track record at Tradesman International (Brycon), I excel in pipe installations and demonstrating exceptional problem-solving abilities. My commitment to safety procedures have significantly enhanced operational efficiency. Skilled in both hard and soft skills, I consistently deliver high-quality workmanship and team collaboration, ensuring project success. Pursuing a position in a busy organization where a qualified individual with an understanding of assembling and installing pipe systems is highly sought. Resourceful Pipefitter Apprentice known for high productivity and efficient task completion. Excel in problem-solving, teamwork, and adaptability, ensuring seamless collaboration and project success. Customer-focused individual with a passion for delivering exceptional service. Strong interpersonal skills with a talent for effectively addressing concerns. Committed to improving customer satisfaction and driving positive outcomes. Experienced in fast-paced environments and adaptable to last-minute changes. Thrives under pressure and consistently earns high marks for work quality and speed. Hardworking employee with customer service, multitasking, and time management abilities. Devoted to giving every customer a positive and memorable experience. An organized and motivated individual, eager to utilize time management and organizational skills across diverse settings. Seeking entry-level opportunities to enhance abilities while contributing to company growth.

Overview

3
3
years of professional experience
1
1
Certification

Work History

Pipefitter Apprentice

Tradesman International(Brycon)
Chandler, AZ
07.2024 - 02.2025
  • Verified and gathered measurements to determine proper piping sizes.
  • Using blueprints, laid out scale drawings of pipe systems and supports.
  • Fabricated pipe supports, hangers and brackets according to specifications.
  • Installed supports from ceiling joists to secure pipes in place.
  • Reviewed blueprints and building codes to determine details and procedures for work.
  • Inspected and tested installed systems to isolate and identify faults.
  • Recognized various materials used in piping systems and displayed working knowledge of material handling techniques.
  • Repaired or replaced defective parts or components in existing piping systems.
  • Cut diverse pipe sizes and lengths to prepare for installation.
  • Cleaned up job sites after installation was completed according to company policies.
  • Modified piping systems with task-specific tools to complete preventive maintenance.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • Cut pipes to specific measurements using a variety of tools such as saws, threaders, reamers and benders.
  • Used hand tools such as wrenches, hammers and screwdrivers correctly when assembling pipes or fittings.
  • Cut or threaded pipes to blueprint or drawing specifications.
  • Read blueprints and schematics to determine layout of piping systems.
  • Observed safe work rules and utilized fall protection and PPE.
  • Assisted journeymen Pipefitters with complex fabrication projects requiring specialized skillsets.
  • Monitored inventory levels of supplies required for pipefitting tasks.

Level 1 Technician

Sunbelt Rentals
Phoenix, AZ
01.2024 - 07.2024
  • Consulted via telephone to understand user problems, run through testing scripts and ask probing questions to locate root causes.
  • Maintained composure and patience in face of difficult customer situations, applying de-escalation techniques and positive customer support.
  • Helped in Warehouse with Power Bank Rentals in Diagnostics, Analyzing for any Damages, Clean Up/Prep for Unit Rentals
  • Inventory, Organize All Sizes in Power Cables, Supplies, Housekeeping when Needed
  • Unload, Load Up Power Banks on to Trucks
  • Used Electrical Pallet and Forklift when needed on Materials in Warehouse

MIG Welder/Pipefitter Apprentice

Mountain West Industrials
Orem, UT
07.2023 - 12.2023
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Welded components in flat, vertical, or overhead positions.
  • Prepared material surfaces for welding by removing scale, rust or other foreign matter.
  • Reviewed blueprints and drawings to determine work requirements prior to beginning projects.
  • Filled gaps between parts using various types of filler materials such as fluxes, rods, wires and alloys.
  • Applied protective coatings such as paint or powder coating after finishing welds.
  • Troubleshot welding problems as required.
  • Adjusted weld machines to correct settings
  • for precision and waste reduction.
  • Maintained a clean workspace throughout the day.
  • Assessed projects to determine the appropriate welding process and equipment needed.
  • Organized tools, supplies and equipment at the end of each shift.
  • Completed welds in flat, horizontal, vertical, or overhead positions.
  • DEMO, Rigging Materials

Welder/Fabrication/Mechanical

QEIS, Inc
Simpsonville, SC
03.2022 - 03.2023
  • Attended regular safety meetings to stay up-to-date on best practices while working with hazardous materials.
  • Adjusted weld machines to correct settings for precision and waste reduction.
  • Lay Outs, Pre-Planned Task Before Starting

  • Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.
  • Cut metal parts with oxyacetylene torch and plasma cutter.
  • Marked or tagged material with job number, piece marks and other identifying marks.
  • Maintained a clean work area in accordance with safety regulations.
  • Cleaned and inspected parts and assemblies at each production stage and documented production defects.
  • Developed new methods of fabricating complex parts in order to increase efficiency or reduce costs.
  • Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
  • Measured workpieces with straightedges or templates to conform with specifications.
  • Reviewed job orders for accuracy and completeness prior to starting work on them.
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Checked angle of pipe on angle table.
  • Maintained clean and organized work environment to ensure safety and productivity.
  • Identified any defects in the fabrication process and took corrective action when necessary.
  • Made steel form parts using various cutting equipment and welded part together per specifications.
  • Cleaned and prepared surfaces for welding operations by grinding, sanding, or polishing as needed.
  • Fabricated metal components and structures according to blueprints, drawings, and written specifications.
  • Approached customers and engaged in conversation through use of effective interpersonal and people skills.
  • Operated equipment and machinery according to safety guidelines.

Education

Certificate of Technical Studies - Welding

Tulsa Welding School
Phoenix, AZ
10-2020

Skills

  • Threaded pipe installation
  • Safety procedures
  • Hydraulics
  • Fuel gas systems
  • Power tool proficiency
  • Commercial pipefitting
  • Pipe measuring
  • Pipe hanger installation
  • Oxy-acetylene welding
  • Hand and power tools
  • Blueprints and specifications
  • Piping specifications
  • Installation and maintenance
  • Pipe cutting
  • Pipe support installation
  • Hand tool proficiency
  • Valve installation
  • Plasma cutting
  • Material prepping
  • Soldering techniques
  • Equipment testing
  • Flange installation
  • Job order prioritization
  • Grooved pipe installation
  • Pipe threading
  • Materials ordering
  • Blueprint interpretation
  • Torque wrench operation

Certification

  • OSHA 10

Timeline

Pipefitter Apprentice

Tradesman International(Brycon)
07.2024 - 02.2025

Level 1 Technician

Sunbelt Rentals
01.2024 - 07.2024

MIG Welder/Pipefitter Apprentice

Mountain West Industrials
07.2023 - 12.2023

Welder/Fabrication/Mechanical

QEIS, Inc
03.2022 - 03.2023

Certificate of Technical Studies - Welding

Tulsa Welding School
Ernestine Tso