Esmeralda Ortiz
Corpus Christi,TX
Summary
Safety Professional with over 6 years of dedicated Safety leadership and more than 20 years of experience in new construction, refinery, and industrial environments. Recognized as easy to approach, teachable team player who is always ready to learn new policies, adapt to changing requirements, and support crews with clear, respectful communications. Highly skilled in hazards identification, incidents investigation, regulatory compliance, and contractor management across complex high-risk operations. Know for building strong relationships in the field, promoting a proactive safety culture, and balancing firm expectations with supportive coaching. Experienced in leading safety programs, conducting through inspections, and driving continuous improvement through clear communication and hands- on - engagement. Committed to ensuring every worker goes home safe and every project meets the highest safety standards.
Overview
16
16
years of professional experience
1
1
Certification
Work History
Site Safety Supervisor
Whiting -Turner- Data Google Project
09.2025 - 01.2026
- Conducted daily, weekly, and monthly jobsite safety inspections to identify hazards and ensure company standards.
- Deliver site safety orientation for new workers and subcontractors.
- Conducted regular-site awareness briefings to reinforce changing conditions., high-risk activities, and safe work expectations.
- Ensure workers follow OSHA, company and site-specific safety policies.
- Collaborated with field supervisors to integrate safety training into daily operations, improving communication and reducing preventable incidents.
- Conducted routine site walks to spot unsafe conditions or behaviors.
- Identify potential hazards related to equipment, environment, and work activities.
- Lead and document incident investigations, root-cause analyses, and corrective action plans.
- Facilitate toolbox talks, safety meeting's,and targeted training sessions for field teams and subcontractors.
- Monitor high- risk activities (excavation,crane operations, confined space, hot work,electrical work)and verify proper permits and controls are in place.
- Preform Job Hazards Analyses (JHAs)and Pre-Task Plans (PTPs)with crews to ensure safe work planning.
- Coordinate emergency response planning,drills, and readiness assessments.
- Review subcontractor safety program and ensure alignment with project requirements.
- Promote a proactive safety culture through recognition, peer accountability,and open communication.
- Provide one-on-one coaching to employees to reinforce safe behaviors and correct at-risk actions.
- Collaborate with project managers, superintendents, and foremen to integrate safety into daily operations.
- Ensure compliance with OSHA regulations, company policies, and client requirements.
- Support audits, regulatory inspections, and third-party safety reviews.
- Manage PPE distribution, and proper use.
- Assist with return-to work coordination and light-duty placement when needed.
Site Safety Manager
SMI Safety/ Coca Cola Expansion Project
02.2025 - 08.2025
- Conducted site safety audits to identify hazards and enforce compliance with regulatory standards.
- Collaborated with project managers to integrate safety measures into operational workflows, minimizing risks.
- Monitored incident reports and investigations, identifying trends to improve safety practices across projects.
- Led safety committee meetings, fostering communication between staff and management on safety initiatives.
- Evaluated and selected personal protective equipment (PPE) for employees based on specific job requirements.
- Coordinated emergency response drills, ensuring readiness for potential workplace incidents or accidents.
- Assisted in the development of emergency response plans to effectively manage crises situations onsite.
- Organized toolbox talks for small groups of workers before shifts commenced, reinforcing key safety messages regularly throughout project duration.
- Maintained accurate records of safety meetings, trainings, and incident reports for easy reference during audits or investigations.
- Coordinated with subcontractors on safety requirements, ensuring adherence to established protocols and minimizing risk exposure for all parties involved.
- Conducted regular site inspections to identify potential hazards and take corrective action before incidents occurred.
- Improved site safety by conducting thorough risk assessments and implementing appropriate control measures.
- Verified contractors maintained a complete Heat Illness Prevention Plan, including heat index monitoring, hydration schedules,and shade /rest provisions.
- Confirmed all heavy- equipment operators held valid certification and met competency standards required for site operations.
- Endured every employee on site met the minimum OSHA 10-hour training requirements prior to performing any task.
- Monitored contractors compliance with water, rest-break. and prevent heat-related illness.
- Conducted routine field checks to verify adherence to heat stress protocols, PPE requirements. and safe-work practices.
- Investigated accidents and incidents to determine root causes and develop corrective actions to address underlying issues.
- Identified accident causes and optimal prevention strategies by conducting thorough investigations and analyses.
Site Safety Supervisor
Miller Environmental Services / Small Shut Down
10.2024 - 01.2025
- Oversaw safety morning meetings.
- , Monitored employees compliance with water, rest break, and shade requirements to prevent heat-related illness.
- Conducted regular Safety training.
- Drug screening for new employees, random drug screen and incident drug screening.
- Safety audits.
- Ensure employees work safe and do not create risk for themselves or others.
- First Aid
- Investigate all incidents, near misses to determine root of cause and recommend preventive measures.
- Maintain current OSHA knowledge and industry and company Safety standards.
- Proper PPE
- Lock out tag out "LOTO"
- Make sure job scope is consistent with permit.
- Analyzed job sites and worksites, and reported on hazards, recommendations, and successful corrections.
- Worked effectively with multiple contractors at various sites providing safety training for employees.
- Inspected job sites for hazardous conditions, excessive noise and PPE use.
- Performed regular workplace hazard assessments to identify potential risks or hazards in the work environment.
- Facilitated communication between management teams concerning health and safety initiatives.
- Implemented strategies designed to reduce accidents or improve working conditions.
- Responded promptly to reported unsafe conditions or behaviors in the workplace.
- Completed permit and safety inspections for workplaces on strict timelines.
- Conducted safety tests on equipment, machinery, and instruments to assess proper functioning.
- Assisted in preparing reports related to safety activities, such as incident rates, near misses, and audits.
- Monitored workers' use of personal protective equipment for compliance with established standards.
- Investigated employee complaints regarding safety issues and took appropriate action when necessary.
- Conducted accident investigations, identified root causes, and recommended corrective actions to prevent future incidents.
- Completed day-to-day duties accurately and efficiently.
- Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.
- Contributed innovative ideas and solutions to enhance team performance and outcomes.
- Managed inventory and supplies to ensure that materials were available when needed.
- Worked successfully with a diverse group of coworkers to accomplish goals and address issues related to our products and services.
Safety Professional
Quality Labor Management LLC/ Solar Project
01.2022 - 10.2024
- Ensured compliance with OSHA regulations, conducting regular audits, and addressing non-compliance issues promptly
- Enhanced site safety by implementing comprehensive safety programs and procedures.
- Provided new employee health and safety orientations, and developed materials for presentations.
- Supported continuous improvement initiatives aimed at enhancing site-wide health and safety performance metrics over time.
- Reduced accident rates through consistent safety inspections and employee training sessions.
- Promoted a culture of accountability within the organization by holding individuals responsible for their safety performance, and ensuring adherence to established protocols.
- Analyzed and identified risk areas to determine compliance with applicable laws and regulations.
- Fostered a positive safety culture by recognizing and rewarding employee contributions towards achieving organizational safety goals.
- Identified accident causes and optimal prevention strategies by conducting thorough investigations and analyses.
- Provided expert guidance on occupational health matters, supporting employees in maintaining their well-being at work.
- Assisted in worksite incident investigations, helping to determine cause and fault to ascertain liability.
- Performed safety analyses to evaluate potential risks and develop risk mitigation strategies.
- Conducted safety audits and inspections to identify workplace hazards and deficiencies.
- Investigated incidents, determining root causes and implementing corrective actions.
- Monitored workplace activities to determine compliance with safety regulations and standards.
- Developed and maintained courteous and effective working relationships.
- Developed strong communication and organizational skills through working on group projects.
- Worked effectively in fast-paced environments.
- Proven ability to develop and implement creative solutions to complex problems.
- Resolved problems, improved operations, and provided exceptional service.
- Excellent communication skills, both verbal and written.
- Acted as a team leader in group projects, delegating tasks and providing feedback.
- Proven ability to learn quickly and adapt to new situations.
- Exercised leadership capabilities by successfully motivating and inspiring others.
- Self-motivated, with a strong sense of personal responsibility.
- Worked flexible hours across night, weekend, and holiday shifts.
- Demonstrated a high level of initiative and creativity while tackling difficult tasks.
- Demonstrated leadership skills in managing projects from concept to completion.
- Adaptable and proficient in learning new concepts quickly and efficiently.
- Assisted with day-to-day operations, working efficiently and productively with all team members.
- Worked well in a team setting, providing support and guidance.
- Coordinated regular toolbox talks, reinforcing key safety concepts among employees on a consistent basis.
- Conducted thorough investigations into workplace incidents, identifying root causes and implementing corrective actions.
Site Safety Supervisor
Clark Construction (Formosa Plastics) Tank-Farm Devision
02.2019 - 12.2022
- Verified that all required permits were current and matched the tasks being performed.
- Confirmed all employees were wearing their 4-gas monitors correctly at the breathing zone.
- Confirmed all hot work was continuously monitored and a designated fire watch was in place.
- Verified all fire extinguishers were inspected, charged, and within its service data.
- Verified the tanks had proper mechanical ventilation established. and maintained.
- Confirmed the tank was fully locked out/tagged out prior to entry and hot work.
- Ensure welders were equipped with the correct PPE for the task and conditions.
- Ensured all employees were taking breaks as needed and staying properly hydrated to prevent heat- related illness.
- Verified housekeeping was maintained throughout the work area to reduce clutter and maintain safe access.
- Ensured all employees were wearing the proper PPE required for their tasks and work areas.
Safety Lead/Pipe Fitter/ Welder Helper
REPCON
06.2015 - 12.2019
- Followed safe work practices, which included fall protection and personal protective equipment.
- Increased workplace safety by adhering to strict guidelines and protocols during daily operations
- Measured, marked, cut, bored, fitted and installed various piping or structural components in accordance with blueprints and job specifications using hand and power tools.
- Conduct risk assessment enforced preventative measures
- Stop any unsafe acts or process that seem dangerous or unhealthy
- Hole Watch
- Obtain Permit's
- Safety toolbox talks
- Fire Watch
HMC/Safety Team Leader
Tank Farm & Boiler Work
03.2010 - 04.2015
- Self-motivated, with a strong sense of personal responsibility.
- Cutting
- Gauging
- Grinding
- Hole watch
- Fire watch
- Pulled permits
- Worked effectively in fast-paced environments.
- Skilled at working independently and collaboratively in a team environment.
- Proven ability to learn quickly and adapt to new situations.
- Conduct risk assessments and enforce preventative measures
- Stop any unsafe acts
- Fire watch
- Hole Watch
- Excellent communication skills, both verbal and written.
Education
NCCR/CCST - Occupational Health and Safety
Contractor Safety Council
Corpus Christi, TX04-2025
OSHA/ 510
Texas A&M Engineering
TexasOSHA/511 - Occupational Health And Safety
Texas A&M University
College Station, TX03-2023
High School Diploma -
Moody High School
Corpus Christi, TX06.1999
First Aid /CPR Certified
Fire Department
Corpus Christi, TXSkills
- Risk assessment
- Safety audits
- Regulatory compliance
- Incident investigation
- Equipment inspections
- First aid administration
- Traffic control
- Hazard elimination
- Permit-to-work systems
- Worker monitoring
- Injury tracking
- Safe lifting techniques
- Production improvement
- Hazard identification
- Workplace inspection
- Spill response
- Environmental auditing
- Safety training delivery
- Health and safety regulations
- Accident reviewing
- Written communication
- Emergency evacuation planning
- Job analysis
- Problem-solving abilities
- Indoor air quality
- Problem-solving
- Safety inspections
- OSHA compliance
- Effective communication
- Employee training
- Accident prevention
- Fall prevention
- Workplace Safety Evaluation
- Risk mitigation
- Reliability
- Machine guarding
- Testing
- Process safety
- Workplace inspections
- Personal protective equipment
- Vehicle safety
- Occupational health
- Accident investigation
- Respiratory protection
- Slip, trip, and fall prevention
- Confined space entry
- Traffic safety
- Fall protection
- Electrical safety
- Construction safety
- Lockout and tagout procedures
- Goal setting
Certification
- EHS - Environmental Health and Safety Professional.
- OSHA 511
- OSHA 510
- CPR/AED &First Aid
- CSST/NCCR
Languages
English
Native/ Bilingual
Spanish
Native/ Bilingual
Education
other,other,true,other
Timeline
Site Safety Supervisor
Whiting -Turner- Data Google Project
09.2025 - 01.2026
Site Safety Manager
SMI Safety/ Coca Cola Expansion Project
02.2025 - 08.2025
Site Safety Supervisor
Miller Environmental Services / Small Shut Down
10.2024 - 01.2025
Safety Professional
Quality Labor Management LLC/ Solar Project
01.2022 - 10.2024
Site Safety Supervisor
Clark Construction (Formosa Plastics) Tank-Farm Devision
02.2019 - 12.2022
Safety Lead/Pipe Fitter/ Welder Helper
REPCON
06.2015 - 12.2019
HMC/Safety Team Leader
Tank Farm & Boiler Work
03.2010 - 04.2015
OSHA/ 510
Texas A&M Engineering
OSHA/511 - Occupational Health And Safety
Texas A&M University
High School Diploma -
Moody High School
First Aid /CPR Certified
Fire Department
NCCR/CCST - Occupational Health and Safety
Contractor Safety Council