EUGENE EARLS JR.
KATY,UNITED STATES
Summary
Focused professional with vast expertise handling root cause investigations and onsite audits. A valued Safety Facilitator known for developing and training capable teams and finding the best solutions for issues.
Overview
12
12
years of professional experience
1
1
Certification
Work History
SAFETY FACILITATOR
ZACHRY INDUSTRIAL, INC.
05.2022 - Current
- Monitor safety of construction activities by strictly following all safety procedures, both in and out of the field, to promote overall safety of on-site personnel and the general public
- Maintain safety protocols that encourage the cost-effective and safe handling of equipment and materials, in accordance with OSHA guidelines and MSDS documents
- Observe job and worksites, and report on hazards to the appropriate supervisor along with recommended actions
- Assist site workforce in planning work to be performed in regards to considering the safety aspects of the work
- Provide regular progress reports to project managers, foremen, and contractors on safety practices and operational improvements
- Respond to incidents and incidents, providing emergency aid support as needed and ensuring that all unsafe conditions have been corrected to eliminate any further incidents
- Complete all necessary paperwork as required, including work safety plans, etc.
PROFESSIONAL PAINTER/BLASTER
COATINGS UNLIMITED (UNION)
10.2021 - 04.2022
- Prioritized safety and wore PPE when dealing with hazardous materials, such as noxious substances, silica, and mineral dust
- Loaded sandblasting equipment with abrasives and attached nozzles to hoses for compressed air activation of jets
- Smoothed rough surfaces and edges using sanding tools to provide evenness
- Reviewed work order documents, technical models, specifications, and requirements to ensure precision cuts and accurate results
- Cleaned, smoothed, and prepared surfaces for paint and primer by sanding, stripping, brushing, and power washing
- Protected exposed surfaces from hazardous materials by setting up drop cloths, plastic, or paper
- Primed and sealed unfinished surfaces made of wood, plastic and metal for additional coats of paint and other finishing substances
- Received work orders from supervisors and clients to determine the scope of work, materials needed, and other job requirements
- Provided cost estimates for work orders based on anticipated materials, quantity, and total surface area of the project
- Cleaned and protected interior and exterior surfaces with oils and mildew removers
- Performed advanced finishing techniques to achieve custom appearance on finished surfaces
- Used brushes, spray guns, and paint rollers to paint exterior surfaces
- Used putty knives and caulking guns to fill cracks, holes, and joints with plaster, putty, and caulk
- Waterproofed surfaces using felt paper, asphalt paper, tar, caulk, and other components.
PROFESSIONAL PAINTER/BLASTER
NORTHSTAR ENERGY SERVICES
03.2016 - 09.2021
- Removed debris from the job site prior to shift completion to maintain a clean and safe working environment
- Followed company and OSHA safety regulations for work site operations to minimize worker risk
- Facilitated alignment, movement, and adjustment of machinery by signaling operators of construction equipment
- Installed structures or fixtures using hand or power tools based on plan drawings
- Moved heavy and bulky work materials using overhead lifts
- Reviewed plans, instructions, or specifications to determine work scope
- Coordinated communication between equipment operators using two-way radios and hand signals
- Logged inventory to keep track of supply counts, organize equipment, and gather essential materials
- Controlled traffic to ensure the safety of the work site, crew, and general public
- Safely operated and maintained job site equipment for maximum productivity
- Acquired and perfected skilled trade specialties under the guidance of experienced mentors.
CONSTRUCTION LABORER
ZACHRY INDUSTRIAL, INC.
05.2015 - 02.2016
- Ensured a clean and safe working environment by removing debris from the job site before the end of each shift
- Adhered to OSHA safety protocols for worksite operations to mitigate any potential hazards to workers
- Moved materials to their designated locations and documented any changes in inventory
- Reported any safety or quality issues to management
- Cleaned up warehouse debris, deposited waste into appropriate piles, and stacked baled trash
- Accurately selected and palletized loads using power material handling equipment
- Transported freight, stock, and other materials to and from storage and production areas and loading docks
- Prepared the ground for construction projects by digging trenches using backhoes
- Used trowels to spread and smooth freshly poured concrete for patios and sidewalks
- Handled on-site issues effectively to keep teams on-task, and took immediate action before an incident or accident occurred.
EXTERMINATOR
WARD'S PEST CONTROL
06.2013 - 04.2015
- Conducted facility inspections to identify the source of infestations and determine the appropriate treatment
- Wore appropriate protective gear to apply pesticides both inside and outside of structures in compliance with company protocols
- Met with customers at their residences or places of business to assess pest and rodent situations, and review service agreements
- Implemented safety protocols when applying pesticides to minimize exposure to people and animals
- Mixed chemicals based on property and climate conditions to optimize efficiency in elimination and prevention
- Documented each job in a well-written report, highlighting sanitation and structural issues that could lead to pest activity.
CONSTRUCTION LABORER
ZACHRY INDUSTRIAL, INC.
04.2012 - 05.2013
- Ensured a clean and safe working environment by removing debris from the job site before the end of each shift
- Adhered to OSHA safety protocols for worksite operations to mitigate any potential hazards to workers
- Moved materials to their designated locations and documented any changes in inventory
- Reported any safety or quality issues to management
- Cleaned up warehouse debris, deposited waste into appropriate piles, and stacked baled trash
- Accurately selected and palletized loads using power material handling equipment
- Transported freight, stock, and other materials to and from storage and production areas and loading docks
- Prepared the ground for construction projects by digging trenches using backhoes
- Used trowels to spread and smooth freshly poured concrete for patios and sidewalks
- Handled on-site issues effectively to keep teams on-task, and took immediate action before an incident or accident occurred.
Skills
- Construction Work
- Regulatory & Safety Compliance
- Worksite Inspection & Audits
- Emergency Response Procedures
- Hazard Mitigation
- Corrective Measures
- Debris Removal
- Extermination / Pest Control
- Painting
- Equipment Maintenance
- Cost Estimation
- Customer Service
Certification
- Construction Site Safety Technician (CSST), Next Level Safety Training, Orange, TX
- Abrasive Blasting Certification (C7), SPCC, Decatur, GA, 11/2026
- OSHA 30 Certified, Next Level Safety Training, Orange, TX
- TWIC Certified, Transportation Security Administration and US Coast Guard, 05/2025
- Welders Certification, Industrial Welding Academy, Houston, TX, 11/2020
Skills Core Competencies
- Wide knowledge of the construction processes involved in heavy industrial construction.
- Deep understanding of all Federal, OSHA, State and local regulations, as well as HSE policies to prioritize safety on the job site.
- Able to work at heights and outside in the changing weather conditions including heat, cold, rain, snow, and wind.
- Demonstrated endurance and strength to perform demanding physical work over extended periods.
- Brilliant hand-eye coordination to ensure productivity and quality.
- Excellent project management skills; capable of accepting ownership of the assigned project work scope and established milestones relative to the successful and timely completion of in-work projects.
- Proficiency in using specialized hand and power tools and heavy machinery for construction.
- Solid problem-solving skills and critical thinking to identify issues inherent in construction processes, including safety risks, and recommend corrective actions.
- Strong leadership skills with ability to mentor and supervise crew to foster their development, and conduct safety training for construction workers.
- Able to read and interpret blueprints, schematics and specifications with attention to detail.
- Highly organized and detail-oriented with the ability to prioritize and plan effectively, manage multiple tasks and projects simultaneously, adapt to changing priorities, and perform well under intense pressure.
- Team player with effective interpersonal skills to establish professional working relationships with customers, contractors, engineers, foremen, project managers, co-workers, and any other work-related contacts.
- Excellent written and verbal communication skills.
Training
- CPR / First Aid AED
- Lockout/Tagout (LOTO)
- Permit To Work (PTW)
- FERC
- SSST
- Fall Protection
- Flagger / Spotter
- Confined Space Attendant
- AGT
- Silica Awareness
- Mentor
- Respirator Protection
- NFPA 70E
- MEWP
Additional Information
Commissioning training.
Timeline
SAFETY FACILITATOR
ZACHRY INDUSTRIAL, INC.
05.2022 - Current
PROFESSIONAL PAINTER/BLASTER
COATINGS UNLIMITED (UNION)
10.2021 - 04.2022
PROFESSIONAL PAINTER/BLASTER
NORTHSTAR ENERGY SERVICES
03.2016 - 09.2021
CONSTRUCTION LABORER
ZACHRY INDUSTRIAL, INC.
05.2015 - 02.2016
EXTERMINATOR
WARD'S PEST CONTROL
06.2013 - 04.2015
CONSTRUCTION LABORER
ZACHRY INDUSTRIAL, INC.
04.2012 - 05.2013
- Construction Site Safety Technician (CSST), Next Level Safety Training, Orange, TX
- Abrasive Blasting Certification (C7), SPCC, Decatur, GA, 11/2026
- OSHA 30 Certified, Next Level Safety Training, Orange, TX
- TWIC Certified, Transportation Security Administration and US Coast Guard, 05/2025
- Welders Certification, Industrial Welding Academy, Houston, TX, 11/2020
Similar Profiles
Jon David BadilloJon David Badillo
Paint Foreman at Zachry Industrial, Inc.Paint Foreman at Zachry Industrial, Inc.
Johnny RodriguezJohnny Rodriguez
Heavy Equipment Operator/Crane Operator at Zachry IndustrialHeavy Equipment Operator/Crane Operator at Zachry Industrial
Austin WootonAustin Wooton
Subcontract Coordinator at Zachry IndustrialSubcontract Coordinator at Zachry Industrial
PETER ZAMUDIOPETER ZAMUDIO
District Manager at ALSCODistrict Manager at ALSCO
Katelyn CamposKatelyn Campos
Server at Pappasitos CantinaServer at Pappasitos Cantina