Eugene Milton
Crofton, MD,MD
Summary
Adept at enhancing workplace safety and efficiency, I leveraged my expertise in hazard identification and leadership at National Safety And Health Training Center to mentor junior staff and reduce accident rates. My collaborative approach and proficiency in safety audits and welding techniques have consistently exceeded employer expectations, underscoring my commitment to excellence and continuous improvement.
Overview
27
27
years of professional experience
1
1
Certification
Work History
Site Safety Manager
National Safety And Health Training Center
01.2024 - Current
- Coordinated regular toolbox talks, reinforcing key safety concepts among employees on a consistent basis.
- Promoted a culture of accountability within the organization by holding individuals responsible for their safety performance and ensuring adherence to established protocols.
- Mentored junior safety personnel, providing guidance on best practices and fostering a strong commitment to workplace safety throughout the organization.
- Conducted thorough investigations into workplace incidents, identifying root causes and implementing corrective actions.
- Supported continuous improvement initiatives aimed at enhancing site-wide health and safety performance metrics over time.
- Developed emergency response plans that effectively addressed potential hazards on-site while minimizing downtime during crises.
- Reduced accident rates through consistent safety inspections and employee training sessions.
- Enhanced site safety by implementing comprehensive safety programs and procedures.
- Facilitated open communication channels between employees and management to address concerns related to workplace safety.
- Maintained detailed records of all safety-related activities, ensuring accurate documentation for reporting purposes.
- Ensured compliance with OSHA regulations, conducting regular audits and addressing non-compliance issues promptly.
- Performed regular compliance reviews and audits, identifying non-compliance issues.
- Investigated potential compliance violations and reported findings to senior management.
- Delivered subject matter expertise for internal and external customers on compliance best practices and quality control.
Steamfitter/Pipe Welder
Local Union 602
01.1997 - 03.2021
- Cut and drilled holes in walls to permit passage of pipes.
- Used clamps and brackets to attach pipes to walls, structures and fixtures.
- Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
- Demonstrated adaptability in working with various types of equipment, tools, and materials required for successful completion of Steamfitter tasks.
- Collaborated with other skilled trades professionals, ensuring seamless integration of steam systems within building infrastructure.
- Used welding tools to assemble and secure pipes, tubes and fittings.
- Reduced the risk of costly repairs or replacements through diligent attention to detail during all phases of steam system installations and maintenance work.
- Reduced downtime in commercial buildings by promptly addressing any issues related to steam systems, such as leaks or malfunctions.
- Demonstrated proficiency in welding techniques required for joining various pipe types utilized within the scope of Steamfitter tasks.
- Maintained a clean work environment, minimizing disruptions while fostering a safe atmosphere for colleagues and clients alike.
- Performed tests on systems to check for issues, repairing electronic, electric, and pneumatic programmable logic controllers.
- Safely operated forklifts and high rangers as per company policies.
- Used [Type] tools to cut and thread pipes to specifications.
- Contributed to successful project completion with precise measurements and cutting of pipes according to specifications.
- Increased safety on job sites by adhering to industry best practices and company guidelines during all phases of installation and repair work.
- Reviewed and interpreted blueprints and specifications to construct and lay out piping assemblies.
- Measured, cut, prepared and joined pipe using threading, welding and soldering.
- Consistently met or exceeded client expectations regarding quality standards set forth in contracts for both new construction projects and renovations involving steam systems.
- Streamlined projects by efficiently organizing equipment, tools, and materials needed for each task at hand.
- Improved overall system functionality by skillfully installing valves, hangers, and support structures needed for proper operation.
- Improved project efficiency by skillfully reading and interpreting blueprints for steam systems installations.
- Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
- Measured, threaded, and cut materials to correct angles.
- Eliminated risks by correctly identifying potential safety hazards.
- Filled pipe systems with water and air to determine location of leaks.
- Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
- Fabricated piping pieces and components in line with design specifications for each system.
- Interpreted blueprints to determine locations, quantities, and sizes of materials required.
- Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
- Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
- Welded in flat, horizontal, vertical, and overhead positions.
- Maintained correct arc length and movement speed to form specified fusion depth and bead.
- Increased weld quality by utilizing appropriate techniques such as TIG, MIG, and Stick welding processes.
- Welded parts using arc, gas-shielded arc, submerged arc and gas equipment.
- Collaborated with team members to complete complex pipe installations, fostering efficient teamwork and communication.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
- Enhanced customer satisfaction through attention to detail in completing precise welds that met or exceeded expectations.
- Assisted in minimizing material waste by accurately measuring and cutting pipes before welding them together.
- Optimized workflow by maintaining a clean and organized workspace to streamline the completion of tasks efficiently.
- Contributed to overall project success through effective collaboration with other trades on job sites, ensuring seamless integration of work efforts.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Supported continuous improvement initiatives by participating in training programs and implementing new techniques learned.
- Chipped off excess weld, slag, and spatter using hand tools.
- Strengthened professional relationships with clients, colleagues, and supervisors by consistently demonstrating exceptional work ethic and dedication to project success.
- Enhanced workplace safety by diligently following OSHA guidelines during all welding tasks.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Interpreted verbal and written instructions from work orders and welding blueprints.
- Maintained safety by wearing protective equipment, staying alert and following procedures.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
- Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Evaluated and tested various soldering materials for accuracy.
- Welded metal components in vertical, overhead and flat positions.
- Replaced faulty parts and components in soldering process.
Education
High School Diploma -
South River High School
Edgewater, MD06.1988
No Degree - Automotive Mechanics
Center of Applied Technology South
Edgewater06.1988
Skills
- Workplace inspections
- Safety audits
- Construction safety
- Hazard Identification
- Personal Protective Equipment
- Excavation Safety
- Crane Safety
- Fire Prevention Strategies
- Hand and power tools
- Fire prevention
- Noise control
Certification
OSHA 510
CSST
CSSS
CSSO
Timeline
Site Safety Manager
National Safety And Health Training Center
01.2024 - Current
Steamfitter/Pipe Welder
Local Union 602
01.1997 - 03.2021
High School Diploma -
South River High School
No Degree - Automotive Mechanics
Center of Applied Technology South
OSHA 510
CSST
CSSS
CSSO
Similar Profiles
Aamir Abdul RazidAamir Abdul Razid
Office Administration Assistant at Imbali National Safety Training AgencyOffice Administration Assistant at Imbali National Safety Training Agency
Jose Ramirez AlvaradoJose Ramirez Alvarado
Commerical Truck Driver at Safety Training Center LLCCommerical Truck Driver at Safety Training Center LLC
Carolyn SeigerCarolyn Seiger
Lead Instructional Designer at National Center for School SafetyLead Instructional Designer at National Center for School Safety