Summary
Overview
Work History
Education
Skills
Timeline
Generic

FABIAN R PINA

San Juan,TX

Summary

Experienced and dependable Electrician worker with a proven track record of efficiently completing tasks in various settings. Skilled in manual labor, equipment operation, and maintaining a clean and organized workspace. Safety-conscious with a strong work ethic and the ability to adapt to different environments. Ready to contribute to a dynamic team and make a positive impact.

Highly-motivated employee with desire to take on new challenges. Adept at working effectively unsupervised and quickly mastering new skills.

Experienced in fast-paced environments and adaptable to last-minute changes. Thrives under pressure and consistently earns high marks for work quality and speed.

Known for leveraging analytical thinking and creativity to solve problems and deliver high-impact solutions in fast-paced environments.

Known for excellent communication and teamwork abilities, with a commitment to achieving company goals and delivering exceptional service. Passionate about continuous learning and professional development.

Overview

9
9
years of professional experience

Work History

Journeyman Electrician

Nyati
Odessa, Texas
12.2025 - Current
  • Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
  • Installed conduit systems, various lighting systems, and basic control systems.
  • Performed rough-in, termination, and underground work.
  • Installed and maintained breaker panels for commercial and residential buildings.
  • Ensured all safety procedures were followed while working with live wires.
  • Dug trenches and created holes to pull conduit and install supports.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
  • Assisted with new installation and upgrades of plant equipment.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Fabricated parts according to specifications using hand and power tools.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Performed maintenance on existing electrical wiring and equipment.
  • Corrected issues and installed new fixtures, wiring, circuits and motors.
  • Collaborated with contractors to coordinate electrical installations and repairs.
  • Organized tools and materials for efficient workflow during projects.
  • Communicated effectively with team members to coordinate tasks efficiently.
  • Pulled wires through conduits with a puller or fish tape.
  • Measured, cut, bent and threaded conduit pipe using hand or power tools.
  • Connected wires to circuit breakers, transformers or other components according to specifications using hand tools.
  • Drilled holes to install electrical components such as junction boxes, switch plates and receptacles.
  • Read blueprints or technical diagrams when necessary to complete jobs accurately.
  • Organized materials needed for the job including wire, conduit and fittings.
  • Assembled conduit supports such as brackets, clamps hangers and straps.
  • Repaired defective wiring in motors and lighting fixtures.
  • Worked in team-based environment to accomplish projects.
  • Built controllers and panels to complete system installations.
  • Transported required supplies and employees from headquarters to job site using company vehicles.
  • Identified and located required tools prior to starting each project.
  • Completed measurements, layouts and job site preparation to reduce downtime.
  • Lubricated, cleaned or repaired machinery or equipment.
  • Performed minor repairs such as replacing broken switches, outlets and fuses.
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Read blueprints to understand project specifications and requirements.
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers, transformers, or other components.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Installed grounding system per NEC code requirements.
  • Calibrated instruments to ensure accuracy of readings.
  • Interpreted blueprints and technical drawings for project execution.
  • Traced and diagnosed electrical malfunctions using hand tools and test equipment.
  • Installed motor feeders and made standard motor connections.
  • Tested continuity of circuits using testing devices such as ohmmeters, voltmeters, ammeters.
  • Updated outdated wiring systems with newer technologies.
  • Supervised electrical installations and repairs on residential and commercial projects.
  • Communicated with clients to understand project requirements and address concerns.
  • Conducted routine maintenance checks on existing electrical systems.
  • Ordered equipment and supplies for job sites as required.
  • Installed conduit systems in residential, commercial, and industrial buildings.
  • Supervised a team of electricians on-site, providing guidance and instruction as needed.
  • Performed with efficiency and quality while installing and repairing electrical projects.
  • Provided empowering leadership to ensure positive production outcomes and consistent team morale.
  • Prepared and planned worksites to help jobs run smoothly.
  • Monitored equipment operation during extraction process to detect problems.

Journeyman Electrician

North Star
Colorado City, Texas
10.2025 - 11.2025
  • Planned layout and installation of duck bank based on project specifications and building codes.
  • Communicated with contractors to ensure project specifications were met.
  • Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
  • Installed conduit systems, various lighting systems, and basic control systems.
  • Performed rough-in, underground work.
  • Dug trenches and created holes to pull conduit and install supports.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Fabricated parts according to specifications using hand and power tools.
  • Reviewed blueprints to determine electrical component and wiring locations.
  • Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
  • Organized tools and materials for efficient workflow during projects.
  • Communicated effectively with team members to coordinate tasks efficiently.
  • Pulled wires through conduits with a puller or fish tape.
  • Measured, cut, bent and threaded conduit pipe using hand or power tools.
  • Drilled holes to install electrical components such as junction boxes, switch plates and receptacles.
  • Organized materials needed for the job including wire, conduit and fittings.
  • Assembled conduit supports such as brackets, clamps hangers and straps.
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Identified and located required tools prior to starting each project.
  • Collaborated with team members to complete projects on time.
  • Resolved customer complaints through effective problem-solving techniques.
  • Installed grounding system per NEC code requirements.
  • Assisted with the layout of large scale industrial plant projects.
  • Interpreted blueprints and technical drawings for project execution.
  • Installed and maintained breaker panels for commercial and residential buildings.
  • Built controllers and panels to complete system installations.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Pulled insulated wires or cables through conduits to complete circuits.

Journeyman Electrician

Triad Electric & Controls
Clarksville, TN
09.2025 - 10.2025
  • Installed electrical systems in residential and commercial buildings.
  • Collaborated with contractors to ensure project specifications were met.
  • Read blueprints or schematic diagrams to determine the layout of a particular job site.
  • Installed grounding system per NEC code requirements.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Fabricated parts according to specifications using hand and power tools.
  • Dug trenches and created holes to pull conduit and install supports.
  • Installed and maintained breaker panels for commercial and residential buildings.
  • Planned new installations by studying drawings, technical manuals, and other documents.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Installed conduit systems, various lighting systems, and basic control systems.
  • Corrected issues and installed new fixtures, wiring, circuits and motors.
  • Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
  • Organized tools and materials for efficient workflow during projects.
  • Followed instructions to assist in electrical wiring and connections.
  • Communicated effectively with team members to coordinate tasks efficiently.
  • Pulled wires through conduits with a puller or fish tape.
  • Measured, cut, bent and threaded conduit pipe using hand or power tools.
  • Connected wires to circuit breakers, transformers or other components according to specifications using hand tools.
  • Drilled holes to install electrical components such as junction boxes, switch plates and receptacles.
  • Organized materials needed for the job including wire, conduit and fittings.
  • Assembled conduit supports such as brackets, clamps hangers and straps.
  • Worked in team-based environment to accomplish projects.
  • Built controllers and panels to complete system installations.
  • Installed new electrical components, fixtures, and motors.
  • Completed measurements, layouts and job site preparation to reduce downtime.
  • Collaborated with team members to prepare job sites for efficient workflow and safety protocols.
  • Measured and prepared supplies for electrical tasks.
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Identified and located required tools prior to starting each project.
  • Read blueprints to understand project specifications and requirements.
  • Repaired faulty wiring and electrical components as needed.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Assisted with the layout of large scale industrial plant projects.
  • Calibrated instruments to ensure accuracy of readings.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Installed motor feeders and made standard motor connections.
  • Performed rough-in, termination, and underground work.
  • Supervised electrical installations and repairs on residential and commercial projects.
  • Communicated with clients to understand project requirements and address concerns.
  • Installed conduit systems in residential, commercial, and industrial buildings.
  • Supervised a team of electricians on-site, providing guidance and instruction as needed.

Journeyman Electrician

Excel
Nederland, Texas
04.2025 - 08.2025
  • Installed conduit systems, various lighting systems, and basic control systems.
  • Corrected issues and installed new fixtures, wiring, circuits and motors.
  • Performed rough-in, termination, and underground work.
  • Dug trenches and created holes to pull conduit and install supports.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Collaborated with contractors to ensure project specifications were met.
  • Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
  • Performed maintenance on existing electrical wiring and equipment.
  • Ensured all safety procedures were followed while working with live wires.
  • Assisted with new installation and upgrades of plant equipment.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Reviewed blueprints to determine electrical component and wiring locations.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Fabricated parts according to specifications using hand and power tools.
  • Built controllers and panels to complete system installations.
  • Organized tools and materials for efficient workflow during projects.
  • Followed instructions to assist in electrical wiring and connections.
  • Pulled wires through conduits with a puller or fish tape.
  • Measured, cut, bent and threaded conduit pipe using hand or power tools.
  • Drilled holes to install electrical components such as junction boxes, switch plates and receptacles.
  • Organized materials needed for the job including wire, conduit and fittings.
  • Assembled conduit supports such as brackets, clamps hangers and straps.
  • Repaired defective wiring in motors and lighting fixtures.
  • Tested continuity of circuits with ohmmeters to ensure proper connections were made.
  • Worked in team-based environment to accomplish projects.
  • Measured and prepared supplies for electrical tasks.
  • Completed measurements, layouts and job site preparation to reduce downtime.
  • Collaborated with team members to prepare job sites for efficient workflow and safety protocols.
  • Organized materials and supplies, ensuring timely availability for ongoing projects.
  • Connected wires to circuit breakers, transformers or other components according to specifications using hand tools.
  • Installed conduit, wire and motor controls.
  • Installed grounding system per NEC code requirements.
  • Assisted with the layout of large scale industrial plant projects.
  • Calibrated instruments to ensure accuracy of readings.
  • Trained workers to install, maintain and repair electrical equipment and fixtures.

Journeyman Electrician

Construction delivery group
Brownsville, Tx
08.2024 - 04.2025
  • Reviewed blueprints or other diagrams to determine the scope of projects prior to beginning work.
  • Trained new employees in safe practices when working with electricity and hazardous materials.
  • Assigned tasks to personnel based on skill level; ensured completion within established deadlines.
  • Read blueprints or schematic diagrams to determine the layout of a particular job site.
  • Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
  • Installed conduit systems, various lighting systems, and basic control systems.
  • Corrected issues and installed new fixtures, wiring, circuits and motors.
  • Performed rough-in, termination, and underground work.
  • Ensured all safety procedures were followed while working with live wires.
  • Dug trenches and created holes to pull conduit and install supports.
  • Planned new installations by studying drawings, technical manuals, and other documents.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Reviewed blueprints to determine electrical component and wiring locations.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Planned layout and installation of wiring and fixtures based on project specifications.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Fabricated parts according to specifications using hand and power tools.
  • Organized tools and materials for efficient workflow during projects.
  • Followed instructions to assist in electrical wiring and connections.
  • Communicated effectively with team members to coordinate tasks efficiently.
  • Followed instructions from supervising electrician regarding job duties.
  • Pulled wires through conduits with a puller or fish tape.
  • Measured, cut, bent and threaded conduit pipe using hand or power tools.
  • Drilled holes to install electrical components such as junction boxes, switch plates and receptacles.
  • Organized materials needed for the job including wire, conduit and fittings.
  • Assembled conduit supports such as brackets, clamps hangers and straps.
  • Completed measurements, layouts and job site preparation to reduce downtime.
  • Updated outdated wiring systems with newer technologies.
  • Built controllers and panels to complete system installations.
  • Prepared work areas by organizing tools and materials for daily tasks.
  • Traced and diagnosed electrical malfunctions using hand tools and test equipment.
  • Installed and maintained breaker panels for commercial and residential buildings.

Journeyman Electrician

Excel
Saint Croix. , U.S. Virgin Islands
09.2019 - 02.2020
  • Installed electrical systems in residential and commercial buildings according to plans and specification.
  • Performed maintenance on existing electrical wiring and equipment.
  • Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
  • Tested continuity of circuits using testing devices such as ohmmeters, voltmeters, ammeters.
  • Installed conduit systems, various lighting systems, and basic control systems.
  • Followed instructions to assist in electrical wiring and connections.
  • Communicated effectively with team members to coordinate tasks efficiently.
  • Followed instructions from supervising electrician regarding job duties.
  • Pulled wires through conduits with a puller or fish tape.
  • Measured, cut, bent and threaded conduit pipe using hand or power tools.
  • Connected wires to circuit breakers, transformers or other components according to specifications using hand tools.
  • Drilled holes to install electrical components such as junction boxes, switch plates and receptacles.
  • Read blueprints or technical diagrams when necessary to complete jobs accurately.
  • Organized materials needed for the job including wire, conduit and fittings.
  • Assembled conduit supports such as brackets, clamps hangers and straps.
  • Dug trenches and created holes to pull conduit and install supports.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Maintained tools and equipment, ensuring readiness for daily tasks and safety compliance.
  • Collaborated with team members to prepare job sites for efficient workflow and safety protocols.
  • Repaired defective wiring in motors and lighting fixtures.
  • Lubricated, cleaned or repaired machinery or equipment.
  • Conducted routine inspections to ensure system functionality and safety.
  • Read blueprints to understand project specifications and requirements.
  • Installed conduit, wire and motor controls.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
  • Installed grounding system per NEC code requirements.
  • Assisted with the layout of large scale industrial plant projects.
  • Calibrated instruments to ensure accuracy of readings.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Fabricated parts according to specifications using hand and power tools.
  • Collaborated with architects on electrical systems design for new construction.
  • Corrected issues and installed new fixtures, wiring, circuits and motors.
  • Performed rough-in, termination, and underground work.
  • Built controllers and panels to complete system installations.
  • Assisted with new installation and upgrades of plant equipment.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.

Electrician

Triad Electric & Controls
Hackberry, Louisiana
05.2018 - 08.2019
  • Verified and inspected electrical components for quality assurance.
  • Performed tests on electrical systems to ensure compliance with safety standards.
  • Read blueprints and technical diagrams to execute tasks accurately.
  • Collaborated with team members to troubleshoot electrical issues effectively.
  • Followed safety protocols while working in various environments and conditions.
  • Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
  • Pulled wires through conduit runs using fish tapes or pull strings when necessary.
  • Worked in team-based environment to accomplish projects.
  • Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
  • Installed conduit systems including EMT, rigid conduit, flexible conduit.
  • Kept work areas clean, neat, and free of hazards.
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Dug trenches and created holes to pull conduit and install supports.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Collaborated with contractors to ensure project specifications were met.
  • Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
  • Installed conduit systems, various lighting systems, and basic control systems.
  • Corrected issues and installed new fixtures, wiring, circuits and motors.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Fabricated parts according to specifications using hand and power tools.
  • Organized tools and materials for efficient workflow during projects.
  • Communicated effectively with team members to coordinate tasks efficiently.
  • Followed instructions from supervising electrician regarding job duties.
  • Pulled wires through conduits with a puller or fish tape.
  • Measured, cut, bent and threaded conduit pipe using hand or power tools.
  • Connected wires to circuit breakers, transformers or other components according to specifications using hand tools.
  • Drilled holes to install electrical components such as junction boxes, switch plates and receptacles.
  • Organized materials needed for the job including wire, conduit and fittings.
  • Assembled conduit supports such as brackets, clamps hangers and straps.
  • Built controllers and panels to complete system installations.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.

Electrician Top Helper

Excel
Beaumont, Texas
05.2017 - 04.2018
  • Followed safety protocols while working in various environments and conditions.
  • Pulled wires through conduit runs using fish tapes or pull strings when necessary.
  • Worked in team-based environment to accomplish projects.
  • Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
  • Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
  • Installed conduit systems including EMT, rigid conduit, flexible conduit.
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Dug trenches and created holes to pull conduit and install supports.
  • Ran cable trays for power distribution from main panels to branch circuits.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Organized tools and materials for efficient workflow during projects.
  • Operated hand and power tools for electrical installation tasks.
  • Followed instructions from supervising electrician regarding job duties.
  • Pulled wires through conduits with a puller or fish tape.
  • Measured, cut, bent and threaded conduit pipe using hand or power tools.
  • Drilled holes to install electrical components such as junction boxes, switch plates and receptacles.
  • Organized materials needed for the job including wire, conduit and fittings.
  • Assembled conduit supports such as brackets, clamps hangers and straps.
  • Learned and mastered skilled trade specialties under guidance of expert mentors.
  • Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
  • Performed rough-in, termination, and underground work.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Fabricated parts according to specifications using hand and power tools.
  • Organized materials and supplies, ensuring timely availability for ongoing projects.
  • Cleaned work areas, tools and equipment used by electricians.
  • Assisted Electrician in installing, maintaining and repairing electrical wiring, fixtures and equipment.
  • Completed semi-skilled and skilled work under supervision of fully qualified professionals.
  • Built controllers and panels to complete system installations.
  • Lubricated, cleaned or repaired machinery or equipment.
  • Troubleshot electrical issues using diagnostic tools and techniques.
  • Read blueprints to understand project specifications and requirements.
  • Installed conduit, wire and motor controls.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Installed grounding system per NEC code requirements.
  • Assisted with the layout of large scale industrial plant projects.
  • Calibrated instruments to ensure accuracy of readings.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Utilized hand and power tools for wiring and assembly tasks.
  • Assembled control panels using various materials such as conduit tubing, switches and relays.
  • Calibrated electronic devices used in the operation of industrial machinery.
  • Interpreted blueprints and technical drawings for project execution.
  • Ensured all safety procedures were followed while working with live wires.

Education

PSJA Memorial Wolverines High School
Alamo, TX

Skills

  • Equipment Installation
  • Grounding Systems
  • Ground Grid, Cadwelding
  • Lightning Protection
  • PVC Installation
  • Duckbank
  • Conduit Bending & Installation
  • Snaptray, Cable Tray Fabrication
  • Wire Pulling
  • Blueprint Reading
  • Punch List Management
  • Low-Voltage Terminations
  • High-Voltage Terminations
  • Problem Solving
  • Lighting Systems
  • Fire alarm Systems
  • H2S Monitor Installation
  • H2S Monitor Calibration
  • Training and Mentoring
  • Panel Installation
  • Data Center Wiring
  • Hand and Power Tools
  • Heavy Lifting
  • Hazardous Locations
  • Quality Control
  • Lockout and Tagout procedures
  • Trench Digging
  • Equipment Operation
  • Skid steer Operation
  • Boom lift Operation
  • Concrete Mixing
  • Unistrut Welding, Cable Tray Welding
  • Grinding and Finishing

Timeline

Journeyman Electrician

Nyati
12.2025 - Current

Journeyman Electrician

North Star
10.2025 - 11.2025

Journeyman Electrician

Triad Electric & Controls
09.2025 - 10.2025

Journeyman Electrician

Excel
04.2025 - 08.2025

Journeyman Electrician

Construction delivery group
08.2024 - 04.2025

Journeyman Electrician

Excel
09.2019 - 02.2020

Electrician

Triad Electric & Controls
05.2018 - 08.2019

Electrician Top Helper

Excel
05.2017 - 04.2018

PSJA Memorial Wolverines High School

Similar Profiles

CREATE PROFILE
FABIAN R PINA