FERNANDO ALANIS

• Communicated and escalated with peers and principles.
• Ensured compliance with industry standards by meticulously reviewing project specifications and adhering to guidelines.
• Conducted comprehensive equipment checks to confirm proper functionality, ensuring accurate readings during inspections.
• Improved coating quality by conducting thorough inspections and identifying areas for improvement.
• Repaired faults, reassembled products, and completed additional tests.
• Investigated customer complaints to take necessary corrective actions.
• Recorded inspection and test results on data sheets.

• Overseeing ambit conditions in shop prior to starting work .
• Ensuring surfaces preparation was incompliance on internal & external risers and spools with specification to the standard sspc sp 5 / nace 1
• Measurement of surface profile of abrasive blast cleaned steel surfaces using a replica tape. NACE SP0287 & that priming will occur with in 8 hours.
• Perform a low - voltage holiday testing wet spong prior to being released from coaters shop. NACE RPO 188-88
• Preformed visual boroscope inspection prior to being released from shop.
• Measurement of DFT's using a non-destructive gauge positech 6000 on a non conductive substrate prior to being released from shop.
• Non - destructive holiday test applied on protective coatings to detect unacceptable discontinuities such as pinholes and voids, ASTM D-4787 & D-5162 AND NACE RPO 188-88
• Ensuring all standards where in compliance and met the clients expectations signing off on all paperwork (ITP'S)

• Welding all bore sections together
• Evaluated team member strengths and assigned tasks based upon expertise and background.
• Identified and implemented strategic plans based on accurate readings of specifications and solid collaboration with project leadership.
• Meticulously tracked all parts and equipment used on each job site.
• 
  

• Overseeing ambit conditions prior to starting work .
• Ensuring surfaces preparation was incompliance with specification to the standard sspc sp 10 / nace 2
• Field measurement of surface profile of abrasive blast cleaned steel surfaces using a replica tape. NACE SP0287
• Field measurement of DFT's using a non-destructive gauge positech 6000 on a non conductive substrate
• Non - destructive holiday test applied on protective coatings to detect unacceptable discontinuities such as pinholes and voids, ASTM D-4787 & D-5162 AND NACE RPO 188-88

• Coated 3 mainlines using sspc 2888 brushed applied , two 8 inch lines and one 12 inch line, total of mainline was 30 miles.
• Prepared surface preperation using abrassive blasting.
• Managing multiple crews involved in the coating process at one time.
• Taking accurate environmental readings, recording them & making sure all requirements are met according to specifications, in order to begin & continue the coating process.
• Determining that all requirements are met & adhered to, according to the specifications, during all steps of the process of coating. (Environmental readings, Surface preparation & materials/ equipment involved, Coating application, Coating inspection, Coating testing, etc.

• Coated mainline using denzo 7125 30 miles of 16 inch.
• Prepared surface preperation by abrassive blasting using black beauty .
• Being prepared each day & each project with the materials, tools, & ambition to begin/ mitigate/ complete/ repeat. Maintaining that sense of ambition and professionalism through a project & into another, seamlessly.
• Managing multiple crews involved in the coating process at one time.
• Taking accurate environmental readings, recording them & making sure all requirements are met according to specifications, in order to begin & continue the coating process.
• 
  

• Coated mainline using 2888 sspc, brushed applied 50 miles
• Prepared surface preperation using abrasive blasting
• Providing professional representation during Pre Job meetings with Facility Operators & Contractors involving Project details, expectations, variables, specifications, etc.
• Managing multiple crews involved in the coating process at one time.
• Taking accurate environmental readings, recording them & making sure all requirements are met according to specifications, in order to begin & continue the coating process.
• Being prepared each day & each project with the materials, tools, & ambition to begin/ mitigate/ complete/ repeat. Maintaining that sense of ambition and professionalism through a project & into another, seamlessly.

• Brushed applied denzo 7200 on mainline, on 20 inch pipe, 40 miles
• Proper surface preparation. i.e. (Media-blasting & Blast rig hand)
• Constantly changing environment; working with others to efficiently complete tasks in a safe manner.
• Removal & application of multiple coating types. i.e. (Denso, Canusa, SPC)
• Effective utilization of workers skills & capabilities to complete tasks & make decisions as well as working with them to build on those strengths while mitigating weaknesses & negative attitude.
• Installation of Anodes (Beds, Rods, Ribbon, Flex, Deep Well)

• Coated using the flocking machine powder ( ARO ) 40 miles of 20 in.

· Locating, probing, potholing pressurized lines and foreign utilities to provide safe & accurate service.

· Constantly changing environment; working with others to efficiently complete tasks in a safe manner.

· Removal & application of multiple coating types. i.e. (Denso, Canusa, SPC)

· Proper surface preparation. i.e. (Media-blasting & Blast rig hand)

· Multiple open excavation conditions & potential hazards. i.e. (Sloped, benched, trench)

• Effective utilization of workers skills & capabilities to complete tasks & make decisions as well as working with them to build on those strengths while mitigating weaknesses & negative attitude

• Brushed applied 2888 on main line , 50 miles of 20 in.
• Prepared surfaces preperation with abrasive blasting, Documented profile on the abrasive blasting .
• Checked for holidays using a 785 model jeeper and repaired holidays.
• Shrunk knowledge gaps with ongoing training and close employee mentoring for new and less experienced team members.
• Monitored safety compliance to maintain strict standards and protect team members from harm.

• Did various of jobs like pipegang, lower ins, tie ends, and put on shrink wraps.
• Reviewed blueprints, specifications and drawings to fully understand project scope ahead of time.
• Completed final walk through at job sites to close out projects.
• Assigned tasks and monitored completion of all work to full satisfaction of company standards and customer requirements.