Fonda McCarty
Jacksonville,FL
Summary
Effective professional with several years of experience overseeing teams of employees. Expert at training, supervising and directing daily operations. Motivational leader with upbeat attitude and talent for building team member skills through one-on-one coaching and mentoring.
Overview
23
23
years of professional experience
Work History
Lead Supervisor
STI
Jacksonville, FL
06.2022 - 05.2024
- Participated in daily organizational maintenance planning meetings, delegated work tasks within division to ensure efficient functioning
- Train employees for Plane Captain certifications including aircraft inspections, fuel sampling, wing walking, fueling, brake riding, running the flight line and much more etc
- Evaluated technical competencies of colleagues and provided guidance to senior management on their readiness for certification, advancement, demotion, or disciplinary measures as necessary.
- Managed administrative processes as part of responsibilities of Quality Assurance Representative in accordance with company standards for CDQAR/CDI projects
- Conducted critical assessment of aircraft safety for a successful takeoff and landing through constant watch of launch and recovery procedures
- Directed and redirected employees of different personalities, maintaining high morale and professionalism in a highly demanding on-the-go environment.
- Conducted daily safety inspections of aircraft and parts to ensure compliance with the 4790. regulations.
- Developed and maintained detailed records of all maintenance activities, including inspection reports, work orders, and service bulletins.
- Investigated customer complaints regarding aircraft performance or operational issues and implemented corrective actions as needed.
- Supervised aircraft servicing operations such as refueling, oil changes, tire replacement.
- Performed detailed quality control inspections prior to releasing an aircraft back into service following a major repair or overhaul operation.
Aircraft Mechanic
Amentum
Jacksonville, FL
12.2018 - 06.2022
- Inspected aircraft components and systems for wear, corrosion, or other defects.
- Operated ground support equipment such as hoists, jacks, and test stands.
- Assisted in the assembly of structural components such as tail sections, wings, fuselage panels, and flight control surfaces.
- Performed routine maintenance on aircrafts including servicing fluids and lubricating moving parts.
- Monitored engine run-ups to identify any problems that may require further attention.
- Utilized specialized tooling when performing repairs on complex aircraft systems.
- Completed flightline, hangar maintenance and repairs on assigned aircraft.
- Assisted in the disassembly and reassembly of aircraft for transportation purposes.
- Updated maintenance and repair logs according to services performed and submitted reports to supervisors for review.
Senior Plane Handler
IAP/AMENTUM
Jacksonville, FL
01.2015 - 01.2018
- Mentored and trained new team members to acquire Plane Captain certifications by instructing them in various tasks such as aircraft inspections, fuel sampling methods, wing walking techniques, fueling procedures and brake riding.
- Maintained a close relationship with the pilot in command throughout each flight to ensure smooth operations.
- Performed post-flight inspections upon landing to check for any discrepancies or malfunctions that may have occurred during flight time.
- Examined tires for adequate air pressure and condition, removed and replaced defective tires to ensure aircraft safety.
- Ensured all aircraft systems were functioning correctly prior to take-off.
- Conducted preflight inspections of the aircraft and its components, including fuel levels, oil pressure, and engine temperatures.
- Verified that all necessary flight documents were on board the plane.
- Coordinated with ground crews regarding fueling requirements and other maintenance activities.
- Supervised aircraft taxiing operations to ensure safety of passengers during departure and arrival times.
- Monitored weather conditions at various airports before entering airspace or making any changes to flight plans.
- Performed emergency procedures when needed such as initiating an evacuation plan or activating fire suppression systems if required.
- Provided guidance to pilots on appropriate speeds for altitude changes, takeoffs, landings., based on prevailing weather conditions.
- Inspected the exterior of the plane regularly to identify potential issues such as loose panels or damage from hail storms.
- Directed pilots using hand signals to maneuver aircraft safely and secured parked aircraft with chocks and tie-downs.
- Performed pre-flight and post-flight maintenance inspections to prepare aircraft for flights.
- Launched and recovered aircraft during day and night hours in accordance with company guidelines.
Business Owner
Jacksonville
01.2015 - 01.2017
- Identified and recruited staff members, including managers and sales personnel.
- Established marketing strategies, such as social media campaigns, to promote the business.
- Monitored cash flow to ensure proper budgeting of resources.
- Created a customer service policy to ensure customers were satisfied with products or services.
- Conducted regular meetings with employees to review progress towards company goals.
- Resolved conflicts between employees or customers in a timely manner.
- Determined pricing for products or services based on costs and competition.
- Managed operations budgeting, accounts payable and accounts receivable and payroll.
Hydraulic Hose Assembler
PARKER HANNIFIN CORPORATION
Jacksonville, FL
01.2014 - 01.2015
- Completed reports by entering required information by documenting the different types of hoses and description of what they are used for, inspection data and inspection dates.
- Assembled hoses with couplings, clamps, and fittings according to specifications.
- Tested assembled hoses for leaks and pressure drop using hydraulic testing machines.
- Inspected components prior to assembly to ensure quality.
- Replaced defective parts as necessary during the assembly process.
- Installed protective covers on finished hose assemblies as needed.
- Cleaned work area and equipment regularly to maintain a safe working environment.
- Collaborated with other departments to ensure timely delivery of completed orders.
- Trained other team members on how to properly assemble hoses according to safety guidelines.
- Operated automated production machines such as crimpers, cutters, and swagers as needed.
- Sorted and placed materials or items on racks, shelves or in bins according to predetermined sequence.
- Inspected finished parts and components to enforce QA standards and uncover defects prior to packaging.
- Removed physical refuse and debris and organized tools to maintain safe work environment.
Project Coordinator/Lead Aircraft Technician and Trainer
REGENT AEROSPACE
Valencia, CA
01.2013 - 01.2014
- Led a project for creating a maintenance facility from scratch for a newly founded company that included the development and implementation of painting, laminating, cleaning, and mechanical workstations.
- Recognized and prioritized the supplies required to support maintenance work
- Conducted training sessions on basic aircraft maintenance techniques and safety procedures for all employees
- Supervised and led a team of over 20 employees in carrying out aircraft interior maintenance tasks
- Replaced worn or defective parts using hand tools and power tools.
- Reviewed work orders and discussed with supervisors.
- Executed corrosion control and inspection duties with minimal supervision.
Tool Room and Hazmat Manager
UNITED STATES NAVY
01.2001 - 01.2008
- Participated in training programs designed to enhance knowledge and skills in hazard identification and risk assessment techniques.
- Educated personnel on safe work practices while dealing with potentially toxic substances.
- Inspected hazardous materials sites to ensure compliance with safety regulations.
- Performed emergency response duties in the event of a hazardous material incident.
- Coordinated with other personnel to develop and implement effective plans for safe handling, storage, and disposal of hazardous materials.
- Monitored environmental conditions at hazardous materials sites to detect potential health hazards.
- Provided technical advice and assistance to local emergency responders on the proper handling of hazardous materials incidents.
- Identified areas where improvements can be made in the management of hazardous waste streams.
- Assessed risks associated with working with different types of hazardous materials.
- Maintained records related to the transportation and disposal of hazardous waste streams.
- Inspected tools to ensure they met safety requirements before issuing them out to customers.
- Calibrated measuring instruments such as micrometers and calipers according to standards.
- Checked in returned tools from customers against original paperwork to verify condition prior to restocking.
- Repaired broken or damaged tools using hand or power tools following prescribed guidelines.
- Ensured compliance with OSHA safety standards by conducting regular audits throughout the facility.
Aviation Machinist
UNITED STATES NAVY
01.2001 - 01.2008
- Performed detailed inspections and repairs on aircraft engines, components, and accessories.
- Troubleshot engine malfunctions using specialized tools and diagnostic equipment.
- Installed new or overhauled engines and related components in aircrafts.
- Repaired or replaced defective parts such as pistons, cylinders, spark plugs, valves, oil lines, pumps, fuel injectors, and other associated parts.
- Inspected damaged engine parts for wear and corrosion according to manufacturer's specifications.
- Replaced faulty wiring harnesses in engines per OEM instructions.
- Assisted with the installation of auxiliary power units in aircrafts when needed.
- Cleaned air filters and changed oil filters as part of preventative maintenance practices.
- Researched, read and interpreted technical manuals and guidelines before inspections, installations and repairs.
- Performed troubleshooting procedures to find root causes of faults.
- Recommended replacement, repair or modification of aircraft equipment based on inspection.
Training Supervisor
UNITED STATES NAVY
01.2001 - 01.2008
- Worked as the training manager alongside the Maintenance Officer and Aviation Maintenance Officer
- Assisted in maintaining training records, maintenance logs for the department, sailors licensing and all pertinent information requited for the deployment of 11 DETS
- Plane captain for the H-3 and SH-60b; responsible for inspecting the aircraft to ensure the aircraft was safe for flight
- As power plant mechanic, responsible for troubleshooting and fixing engine part of aircraft.
Power Plant Mechanic
UNITED STATES NAVY
01.2001 - 01.2008
- Performed routine maintenance on equipment, including lubrication of moving parts and replacement of worn parts.
- Monitored and adjusted the operation of turbines, pumps, valves, compressors, condensers, and other auxiliary equipment.
- Checked systems for proper performance levels using testing instruments such as thermometers, pressure gauges, flow meters and other tools.
- Troubleshot mechanical problems by consulting technical manuals and schematics.
- Changed oil, hydraulic fluid or other lubricants to maintain equipment condition.
Education
Bachelor of Science - Aeronautics Minor in Aviation Safety
Embry-Riddle Aeronautical University - Daytona Beach
Daytona Beach, FL05-2019
Associate of Science - Aviation Maintenace
Embry-Riddle Aeronautical University - Daytona Beach
Daytona Beach, FL05-2019
Skills
- Agile operations
- Production supervision
- Project coordination
- Leadership
- Training
- Maintenance planning
- Aircraft inspections
- Fuel sampling
- Wing walking
- Fueling
- Brake riding
- Running the flight line
- Technical competencies evaluation
- Quality assurance
- Aircraft launch and recovery
- Directing/redirecting
- Morale and professionalism maintenance
- Maintenance procedures
- Hydraulic and industrial hose assembly
- Order preparation and processing
- Safe work environment maintenance
- Documentation and reporting
- Aircraft interior repair, overhaul, alteration, and installation
- Maintenance facility establishment
- Tool and equipment management
- Hazardous materials management
- Powerplant mechanic
- Troubleshooting
- Supply management
- Training management
- Maintenance logs maintenance
- Licensing
- Aircraft inspection
- Scheduled and unscheduled maintenance
- Microsoft Office proficiency
- AIMs proficiency
- OMA proficiency
- Various Aircraft Ground Support Equipment proficiency
Professionalawardsrecognition
- Navy Battle "E" Ribbon (2nd)
- CNAP Safety "S" Award
- Lockheed Martin Superior Maintenance
- Overseas Service Ribbon (2nd)
- Good Conduct Medal (2nd)
- Global War on Terrorism Expeditionary Medal National Defense Medal (2nd)
- Sea Service Deployment Ribbon
- Armed Forces Expeditionary Medal
Timeline
Lead Supervisor
STI
06.2022 - 05.2024
Aircraft Mechanic
Amentum
12.2018 - 06.2022
Senior Plane Handler
IAP/AMENTUM
01.2015 - 01.2018
Business Owner
01.2015 - 01.2017
Hydraulic Hose Assembler
PARKER HANNIFIN CORPORATION
01.2014 - 01.2015
Project Coordinator/Lead Aircraft Technician and Trainer
REGENT AEROSPACE
01.2013 - 01.2014
Tool Room and Hazmat Manager
UNITED STATES NAVY
01.2001 - 01.2008
Aviation Machinist
UNITED STATES NAVY
01.2001 - 01.2008
Training Supervisor
UNITED STATES NAVY
01.2001 - 01.2008
Power Plant Mechanic
UNITED STATES NAVY
01.2001 - 01.2008
Bachelor of Science - Aeronautics Minor in Aviation Safety
Embry-Riddle Aeronautical University - Daytona Beach
Associate of Science - Aviation Maintenace
Embry-Riddle Aeronautical University - Daytona Beach
Similar Profiles
Myles BenthoneMyles Benthone
Line Technician at STILine Technician at STI
Jon MooreJon Moore
Operator/Material Handler at STIOperator/Material Handler at STI
HYEJIN BELLA KIMHYEJIN BELLA KIM
Human resources officer at STIHuman resources officer at STI