Frank Nicholas Rosas

• Measure distance between points using surveyor's chain.
• Mark and set points with spikes, stakes and rods.
• Maintain cleaned and repaired survey equipment and instruments.
• Complete and comply with daily logs, JSA, work scope permits.
• Collect data using manual and electronic survey instruments, such as 3D scanners and GPS devices such as total station etc.
• Met with crew leaders to review and verify field notes.
• Identify elevations by positioning levels or rods at specific points.
• Use manual and robotic field surveying techniques to complete accurate work.
• Analyze survey computations with applicable standards to determine adequacy of data.
• Calculated latitudes, longitudes, angles and areas using survey field notes or reference tables.
• Compiled engineering plan information to stake projects for construction.

• Managed all incoming building materials such as concrete forms steal beams, wire mesh, liners, tubes, jacks, pipes, a-frames, scaffolding, platforms, railings, rebars.
• Supervised three yard sites, site and dirt prepped for storage space using bulldozer, skid steer.
• Managed sites by focusing on safety, operations and productivity.
• Communicated with employees to demonstrate high standards and mitigate issues.
• Off loaded and loaded truck trailers using telehandler forklift daily, moved and separated material in lay-down yards and within building site.
• Used daily system logs to document production information, discussing issues with management.
• Calibrated machines to adhere to quality standards and maintain required productivity levels.
• Worked with building site survey engineer to complete assessments, measuring boundaries and notable landmarks.
• Verified accuracy of survey measurements and calculations conducted at survey sites. Assisted with layout, for concrete forms prior to pouring for vertical work.
• Communicated with suppliers and coordinated delivery of supplies to job sites.

• Operated hand and power tools to complete repairs, such as grinders to clear old debris to allow to rollers to function properly once again.
• Installed new systems, replacement parts and components to maintain proper operation.
• Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.
• Read and interpreted equipment and work orders to properly perform required maintenance services.
• Performed lock out/ prior and after completion of work.
• 
  
• Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
• Set up and tended equipment with machine operators to complete runs.
• Examined final products for conformance with quality and design standards.
• Scraped off excess spatter from welds using portable grinders and arc-cutting equipment.
• Prepared broken parts for welding by properly grooving and scarfing surfaces.
• Conducted x-ray, hydrostatic and tolerance tests on welded parts to verify weld quality and conformance to specification.

Tesla Gigafactory / Samsung Semiconductor

• Performed daily work scope / Job Safety Analysis prior to starting work each day for site compliances, given details of crews name/time/location entries and details of tasks that'll be ongoing. Obtained any permits needed such as hot work, confine space; etc.
• Delivered work orders and clear instructions to painting team to prepare for each shift.
• Reviewed painting projects to verify highest quality and adherence to organization's strict guidelines.
• Cleaned and properly stored paint equipment and supplies at end of each workday.
• Performed repairs to defects in walls by patching holes and scrapes prior at project start.
• Primed, smoothed and cleaned trim, walls and ceilings to prepare for painting tasks.
• Readied surfaces and surrounding areas for painting with sandpaper, tape and other materials.
• Applied paints, sealers and solvents to plaster, sheetrock, concrete and wood.
• Spread undercoats and finish materials using rollers and spray equipment.
• Operated power sanding and edging equipment, buffers and vacuums and hand scraped according to job requirements.
• Use of surface grinders prior to epoxy flooring applications.
• Demonstrated basic carpentry skills and advanced knowledge of floor refinishing hand tools and power equipment maintenance.
• Organized and prepared work trailer for upcoming sanding and finishing projects.
• Removed trash, building debris and sanding dust from site upon project completion.
• Demonstrated leadership by making improvements to work processes and helping to train others.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Inspected or evaluated workplace environments, equipment or practices to verify compliance with safety standards and government regulations.
• Collaborated with engineers or physicians to institute control or remedial measures for hazardous or potentially hazardous conditions or equipment.
• Surveyed techniques used in transportation regarding use and storage of chemical agents and toxic materials.
• Developed noise surveys, continuous atmosphere monitoring and ventilation surveys.
• Managed sites by focusing on safety, operations and productivity.
• Monitored training costs and prepared budget reports to justify expenditures.

• Maintained open communication with crane and other equipment operators to smoothly transport loads.
• Coordinated structural and heavy lifts weighing up to [Number] pounds with properly rigged equipment.
• Planned and prepared rigging before performances and handled rigging changes during performances.
• Conducted frequent safety evaluations on rigging equipment.
• Signaled and verbally directed workers engaged in hoisting and moving loads to protect workers and materials.
• Unloaded materials and arranged in specific locations.
• Maintained cranes by inspecting for defects or wear, lubricated ropes and winches and replaced worn out cables.
• Adhered to OSHA safety standards and precautions including weight capacity, tag lines and ground stability.
• Directed work crews for correct placement of blocking and outrigging under cranes.
• Verified daily schedules and instructions with project manager prior to beginning work on project.
• Reviewed and interpreted load charts and calculated weight.
• Inspected and maintained inventory of all slings, chains, ropes and shackles.
• Built and assembled crawler cranes using mobile cranes.
• Use of bull rigging equipment assembles to get large loads out buildings to pass them to tower cranes and/ or mobile cranes

• Preparation of metal surfaces for painting, painted components, equipment, interiors, and exteriors of vessels, using spray guns, brushes, and rollers
• Set up building containment into scaffolds around areas of set work
• Confined space work during sandblasting, and painting
• Watch valves, vessels, and switches being aware while working on and around sensitive equipment
• Use of scaffolds, ladders, and platforms to get to high locations wearing proper safety PPE at all times
• Use of air hoses, for sandblasting always maintained proper safety checks and placements of equipment
• Fill out documents of observations, safety procedures, JSAs, Permits, keeping notice of work duties, completion and materials needed before/after work start to finish.
• Reviewed painting projects to verify highest quality and adherence to organization's strict guidelines.
• Applied primer, paints, varnishes and lacquers to walls and surfaces.
• Readied surfaces and surrounding areas for painting with sandpaper, tape and other materials.
• Mixed paints and solutions and monitored consistencies.

• Help assisted journeyman to any required tasks, climbing onto platforms, to get to beams with use of scaffolds, ladders, wearing safety harnesses and always wearing proper PPE
• Use of hand tools, and power tools such as grinders to prepare beams for welders
• Determined fittings and connections reading off blueprints and properly following any given instructions
• Worked safely in tight areas around hazardous, and sensitive equipment such as gas and hot steam valves, pipes, and switches
• Use of facemask to protect against chemicals releasing from hot metal work
• Handled materials carefully dictating what knots to use to hoist up to location with using proper lifting techniques.

• Assigned to the Bush Intercontinental Airport in Houston, Texas for construction work duties
• Conducted work site safety inspections prior to work, assigned work duties to construction workers
• Provided workers with necessary construction tools PPE & equipment, for Foreman.
• Used picks and shovels to dig, spread and level dirt and gravel.
• Completed work documents and Job Safety Analysis reports
• Assigned to conduct traffic control flagger duties to provide safe construction vehicular traffic flow within airport roads, runaways and/or taxiways
• Conducted vehicle inspections on construction vehicles needing entry into airport properties, per City of Houston Airport Rules and Regulations: Security Inspections on Vehicles, using under car mirrors, obtaining driver identification and security access cards, completing security entry/exit logs
• Prepared site areas for day's asphalt load.
• Used range of hands tools, power tools and construction equipment to spread gravel and asphalt.
• Operated mini excavator, skid steer to properly grade land, dig, use of jack attachments for concrete demolition. Operated broom truck on taxiways/runways throughout shifts to keep jobsites/ work areas clean, safe and maintained.
• Inspected vehicles before and after every trip to assess performance and maintenance requirements.
• Kept load counts on incoming and outgoing concrete/dirt trucks to turn into for material documentation.
• Finished concrete surfaces by troweling, floating and brushing following project requirements and specifications. Applied caulking compounds by hand or caulking guns to protect against entry of water or air.

• Studied characteristics, abilities, and features: compared and contrasted competitive models and specs
• Professionally met and greeted customers in person making them feel comfortable, understanding, and welcomed using great communication and presentation skills
• Make phone calls to customers, set up appointments for product presentation
• Check emails, reply and reach out to customers and other business partners for shipping and receiving
• Kept precise records of required set target goals using Microsoft Excel using formulas and functions
• Wrote documents and disclosures up for managers and customers using Microsoft Word
• Closed sales by overcoming objections; asking for sales; negotiating price, explained product provisions, services and financing

• Demonstrated superior knowledge in personal health nutrition and supplement products to assist customers with the selection and purchase of company products
• Answered questions on nutritional and supplement products based using knowledge from company training, merchandising bulletins and other Company approved information
• Sell merchandise and interact with customers according to company standards
• Receive, check in and shelve merchandise; keep store clean and uncluttered
• Complete customer transactions using Point of Sales computer system
• Perform register store open/close functions and bank deposits.

• Obtained notices of completion and compliance certifications from construction administration consultants
• Assigned projects and tasks to employees based on their competencies and specialties
• Performed construction site preconceptions and coordinated post-construction audits
• Accurately provided status information on project progress to the project management
• Properly maintained all onsite equipment and vehicles
• Ordered supplies, tools and equipment
• Assisted workers with work duties using construction equipment, power tools, and materials
• Measured precisely for correct amount of materials needed, fittings, distance, and coverage.