Juan C Parra
Donna,TX
Summary
Electrician with commercial ,industrial, Solar and wind experience focused on quality safety and customer satisfaction. Adept in performing electrical installations, maintenance and repairs in homes solar, plants facilities; knowledgeable in all areas of the national electrical code; and excel at analyzing and solving problems with various electrical controls and systems.
Overview
10
10
years of professional experience
Work History
Electrician
Foss engry services
Odessa, TX
02.2025 - 11.2025
- Installed conduit for new wiring systems in commercial buildings.
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers and transformers.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Diagnosed malfunctioning wiring using test equipment to locate faults.
- Inspected lighting fixtures and replaced burnt out bulbs or ballasts.
- Terminate, EMT, and fabricate support stands.
- Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
Electrician
MMR Constructors
West Lake , LA
04.2024 - 12.2024
- Installed conduit, wire and motor controls.
- Ensured that all work was completed in accordance with applicable codes.
- Installed wiring for new construction projects according to blueprints.
- install cable tray, EMT ,conduit
- Inspected, tested, and replaced faulty circuit breakers, switches, and outlets.
Electrician
Zachry Industrial
Belle Chasse, LA
11.2023 - 03.2024
- Installed conduit, wire and motor controls.
- installed cable tray , EMT, Grounding
- Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
Electrician
Triad Electric & Controls
Austin, TX
03.2023 - 10.2023
- Installed new electrical components, fixtures and motors.
- Measured and prepared supplies for electrical tasks.
- Followed relevant electrical and building codes for each job.
- Inspected existing wiring to identify short circuits.
- Installed electrical wiring during remodeling projects.
- Repaired electrical equipment using hand and power tools and testing and diagnostic equipment.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Connected wires to circuit breakers and transformers.
Electrician
Elite Staffing Services
Abilene, TX
11.2022 - 02.2023
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers and transformers.
- Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
- Tested entire electrical assembly for performance levels and safety concerns.
- Kept work areas clean, neat and free of hazards.
- Installed motor feeders and made standard motor connections.
Electrician
Isc Constructors
Baytown, TX
09.2022 - 10.2022
- Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
- Performed rough-in, termination and underground work.
- Troubleshot issues and developed effective solutions.
- Dug trenches and created holes to pull conduit and install supports.
- Installed motor feeders and made standard motor connections.
- Installed and maintained breaker panels for commercial and residential buildings.
- Kept work areas clean, neat and free of hazards.
Electrical Journeyman
Cec Electric CO
Sinton, TX
06.2022 - 08.2022
- Followed electrical code manuals to install and repair electrical systems.
- Pulled insulated wires or cables through conduits to complete circuits.
- Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
- Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
- Kept work areas clean, neat and free of hazards.
- Built controllers and panels to complete system installations.
Electrical Journeyman
MMR Constructors
Westlake, LA
03.2022 - 05.2022
- Connected wires to circuit breakers and transformers.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
- Planned and installed complicated circuit systems in both commercial and residential construction.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Interpreted blueprints and technical drawings to correctly assemble panels and control boxes.
- Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
- Installed conduit, wire and motor controls.
Electrical Journeyman
Trio Electric.
Austin, TX
01.2022 - 03.2022
- Installed conduit systems, various lighting systems, and basic control systems.
- Performed rough-in, termination and underground work.
- Troubleshot issues and developed effective solutions.
- Installed motor feeders and made standard motor connections.
- Built controllers and panels to complete system installations.
- Installed and maintained breaker panels for commercial and residential buildings.
Electrical Journeyman
talent corp
Austin, TX
04.2021 - 12.2021
- Followed electrical code manuals to install and repair electrical systems.
- Obtained proper permits to carry out electrical work on facility and construction projects.
- Meticulously tested installations to check continuity of circuits and compatibility and safety of components using test equipment such as ohmmeter, amp meter, voltmeter and oscilloscope.
- Pulled insulated wires or cables through conduits to complete circuits.
- Planned layout and installation of wiring and fixtures based on project specifications and building codes.
Electrical Journeyman
Triad Electric & Controls
McPherson, KS
03.2020 - 02.2021
- Installed conduit, wire and motor controls.
- Review for accuracy of shipment and delivery
- follow standard maintenance protocol to ensure compliance is always met
- Adhere to all safety requirements when operating and maintaining heavy equipment at facility
- Juggled multiple projects and tasks to ensure high quality and timely delivery.
- Connected wires to circuit breakers and transformers.
- Planned and installed complicated circuit systems in both commercial and residential construction.
Electrical Journeyman
Isc Constructors
Westlake, LA
04.2019 - 01.2020
- Followed electrical code manuals to install and repair electrical systems.
- Took ownership of electrical crew schedule, developing short- and long-term look ahead schedules to align with execution plans.
- Enforced safety regulations and penalized workers for not following work safety agreements.
- Performed troubleshooting and diagnosis on malfunctioning systems or components.
- Installed leads and connected cables to motors, apparatus and equipment.
- Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers and transformers.
Apprentice Electrician
EDP Renewables North America LLC
05.2018 - 02.2019
- Troubleshot electrical control circuits using [Technique].
- Utilized wide breadth of testing equipment to assess electrical systems, circuit continuity and accessory fixtures.
- Performed electrical utility services for industrial based and new building projects.
- Examined and created solutions for high voltage electrical system problems.
- Installed conduit, wire and motor controls.
- Inspected, tested, maintained and repaired systems and equipment, including voltage testers, multimeters, oscilloscopes and fiber optic equipment.
Apprentice Electrician
Trillium Staffing Solutions
San Antonio, TX
01.2017 - 04.2018
- Assisted with electrical installation tasks, including [Task].
- Dug trenches and created holes to pull conduit and install supports.
- Inspected existing wiring to identify problems such as short circuits.
- Built controllers and panels to complete system installations.
- Checked and troubleshot [Number] to [Number] volt equipment to identify and address concerns.
- Tested entire electrical assembly for performance levels and safety concerns.
Apprentice Electrician
Triad Electric & Controls
Hackberry, LA
03.2016 - 12.2016
- Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
- Assisted electricians in wiring residential buildings with installation of electrical conduits.
- Worked in team-based environment to accomplish projects.
- Kept work areas clean, neat and free of hazards.
- Maintained organization, cleanliness and safety in work areas.
- Followed relevant electrical and building codes for each job.
Education
High School Diploma -
Donna High School
Donna, TX06.2012
Skills
- Bilingual
- Multitasker
- Blueprint reading
- Testing installation and repairing
- Testing electrical systems
- Operating heavy equipment (forklift,scissor lift, boom, lift, backhoe loader, trencher)
- Lock out /tag out
- Electrical wiring layouts
- Troubleshooting and diagnostics, electrical , mechanical and hydraulic
- Operating power tools
- Equipment installation
- hvac system
- testing equipment
Timeline
Electrician
Foss engry services
02.2025 - 11.2025
Electrician
MMR Constructors
04.2024 - 12.2024
Electrician
Zachry Industrial
11.2023 - 03.2024
Electrician
Triad Electric & Controls
03.2023 - 10.2023
Electrician
Elite Staffing Services
11.2022 - 02.2023
Electrician
Isc Constructors
09.2022 - 10.2022
Electrical Journeyman
Cec Electric CO
06.2022 - 08.2022
Electrical Journeyman
MMR Constructors
03.2022 - 05.2022
Electrical Journeyman
Trio Electric.
01.2022 - 03.2022
Electrical Journeyman
talent corp
04.2021 - 12.2021
Electrical Journeyman
Triad Electric & Controls
03.2020 - 02.2021
Electrical Journeyman
Isc Constructors
04.2019 - 01.2020
Apprentice Electrician
EDP Renewables North America LLC
05.2018 - 02.2019
Apprentice Electrician
Trillium Staffing Solutions
01.2017 - 04.2018
Apprentice Electrician
Triad Electric & Controls
03.2016 - 12.2016
High School Diploma -
Donna High School