Summary
Overview
Work History
Education
Skills
Accomplishments
Certification
Timeline
Generic

Garland Morgan

San Angelo,TX

Summary

Skilled Diesel Mechanic demonstrates abilities in troubleshooting and fixing problems within all vehicle systems. Adept at working quickly and accurately to repair, replace or refurbish components. Proficient in maintaining records, updating logs and training employees. Highly adaptable Mechanic consistently focused on quality and customer satisfaction. Detailed understanding of safety mandates and regulations to maintain safe work environment. Committed job seeker with a history of meeting company needs with consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand. Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.

Overview

9
9
years of professional experience
1
1
Certification

Work History

Mechanic

New Tex Trucking
Mertzon, TX
04.2022 - 10.2023
  • Repaired or replaced worn parts such as brake pads and wheel bearings using hand tools and power tools.
  • Completed required paperwork and delivered to customer.
  • Engaged with customers to determine automotive requirements and communicate vehicular defects or problems.
  • Adjusted vehicle components according to specifications utilizing testing equipment such as dynamometers or chassis charts.
  • Removed old oil, replace filters and added correct amount of new [Type] oil.
  • Connected electrical wiring to control panels and electric motors.
  • Researched parts availability from vendors in order to complete repairs efficiently.
  • Assisted fellow mechanics when necessary during complex repairs.
  • Diagnosed and repaired vehicles during road call situations.
  • Reviewed work orders and discussed with supervisors.
  • Utilized computer diagnostic equipment to troubleshoot electrical issues in vehicles.
  • Tested electronic computer components in automobiles to determine proper operation.
  • Ensured that all tools were properly cleaned after use.
  • Disassembled defective units to diagnose malfunctions and repair them accordingly.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Examined brake systems for proper operation; replaced pads or shoes when needed.
  • Repaired and serviced air conditioning, heating and electrical systems.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Welded broken metal parts using oxyacetylene torches and electric arc welders.
  • Diagnosed mechanical problems and made necessary repairs.
  • Checked all fluid levels regularly; topped off when necessary.
  • Worked with a team of mechanics to complete projects efficiently within time limits.
  • Installed new parts such as radiators, injectors, hoses, belts, alternators, starters .
  • Completed standard inspections to assess wear and damage to vehicles.
  • Conducted test drives before and after repair services.
  • Maintained vehicles by changing oil, checking batteries and lubricating components.
  • Installed new vehicle systems and components.
  • Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.
  • Tested electrical circuits for faults using diagnostic computers.
  • Used manual and computer- assessed diagnostic devices to test equipment and determine repair needs.
  • Verified dimensions and clearances of parts to achieve conformance to factory specifications.
  • Replaced worn or damaged components such as spark plugs, air filters, and oil filters.
  • Placed orders for parts necessary to complete vehicle repairs and installations.
  • Rewired ignition systems, lights and instrument panels.
  • Optimized brake systems by adjusting and replacing components.
  • Utilized electronic testing equipment to troubleshoot fuel, ignition and emissions control systems.
  • Completed preventive maintenance on engines, transmissions, tires and other vehicle systems.
  • Examined and adjusted protective guards, loose bolts and specified safety devices.
  • Operated specialty equipment, standard tools and gauges to complete assessments and repairs.
  • Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
  • Raised trucks, buses and heavy parts or equipment with hydraulic jacks or hoists.
  • Calibrated instruments used to test performance of vehicle components such as speedometers and tachometers.
  • Cleaned and lubricated parts before reassembly of the unit, engine, vehicle .
  • Completed in-depth inspections of vehicle brakes, steering and other systems to check for safety and performance issues.
  • Disassembled and overhauled internal combustion engines, pumps and generators.
  • Repaired fuel injection systems, turbochargers, brakes, and exhaust systems.
  • Evaluated vehicle systems to assess function and uncover defects.
  • Followed safety guidelines while performing repair work on heavy-duty vehicles.
  • Reconditioned and replaced pistons, bearings, gears and valves.
  • Performed preventative maintenance on diesel engines and equipment.
  • Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
  • Inspected vehicles for safety issues and roadworthiness.
  • Utilized computer programs and visual inspections to diagnose problems with brakes, steering and transmissions.
  • Installed accessories and non-OEM components to meet vehicle operator needs.
  • Achieved cost-savings by developing functional solutions to problems.

Diesel Mechanic

Transoil marketing llc
Abilene, TX
12.2021 - 04.2022
  • Placed orders for parts necessary to complete vehicle repairs and installations.
  • Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
  • Troubleshoot complex problems using diagnostic software programs.
  • Utilized computer programs and visual inspections to diagnose problems with brakes, steering and transmissions.
  • Utilized electronic testing equipment to troubleshoot fuel, ignition and emissions control systems.
  • Ran diagnostics on heating and cooling systems to trace faults and completed skilled repairs.
  • Manage inventory of spare parts used for repairs and maintenance activities.
  • Used manual and computer- assessed diagnostic devices to test equipment and determine repair needs.
  • Perform preventative maintenance on vehicles, including oil changes, lubrication, filter changes, and other routine maintenance.
  • Installed accessories and non-OEM components to meet vehicle operator needs.
  • Supervise a team of mechanics working on diesel engine projects or repairs.
  • Analyze data collected during tests to diagnose problems accurately.
  • Provide technical guidance to apprentices or other mechanics as needed.
  • Train staff on proper use of tools, equipment, and safety procedures.
  • Optimized brake systems by adjusting and replacing components.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Evaluated vehicle systems to assess function and uncover defects.
  • Maintain accurate records of all repair work performed in accordance with company policy.
  • Conduct regular inspections to identify any potential issues with the engine or its components.
  • Ensure that all safety protocols are followed when performing repairs and maintenance tasks.
  • Repair and replace defective parts as necessary using hand tools and power tools.
  • Reconditioned and replaced pistons, bearings, gears and valves.
  • Removed and disassembled defective diesel engines in automobiles, trucks, buses, and construction vehicles to complete repairs.
  • Monitor performance of completed repairs to ensure quality standards are met.
  • Read and interpreted standards, drawings and blueprints and pinpointed inspection needs for repair work.
  • Maintained vehicles by changing oil, checking batteries and lubricating components.
  • Tested electronic computer components in automobiles to determine proper operation.
  • Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.
  • Completed in-depth inspections of vehicle brakes, steering and other systems to check for safety and performance issues.
  • Inspected and verified dimensions and clearances of parts to verify conformance to factory specifications.
  • Ensure proper operation of all vehicle systems by testing components regularly.
  • Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
  • Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
  • Performed checklist of fluid levels, air filter, tire pressure and more as part of service orders.
  • Examined and adjusted protective guards, loose bolts and specified safety devices.
  • Disassembled and overhauled internal combustion engines, pumps and generators.
  • Removed old oil, replace filters and added correct amount of new [Type] oil.
  • Develop strategies to reduce downtime for vehicles under their care.
  • Responsible for diagnosing, maintaining, and repairing all types of diesel engines and related components.
  • Keep up-to-date on new technologies and best practices in the field of diesel mechanics.
  • Operated specialty equipment, standard tools and gauges to complete assessments and repairs.
  • Verified dimensions and clearances of parts to achieve conformance to factory specifications.
  • Installed new vehicle systems and components.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Order replacement parts as needed from suppliers or vendors.
  • Conduct daily inspections to check condition of vehicles before they leave the shop.
  • Completed preventive maintenance on engines, transmissions, tires and other vehicle systems.
  • Collaborate with management to create efficient processes for handling customer requests.
  • Rewired ignition systems, lights and instrument panels.
  • Completed standard inspections to assess wear and damage to vehicles.
  • Raised trucks, buses and heavy parts or equipment with hydraulic jacks or hoists.
  • Conducted test drives before and after repair services.
  • Repaired and serviced air conditioning, heating and electrical systems.
  • Collaborated with others to discuss new opportunities.
  • Achieved cost-savings by developing functional solutions to problems.
  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Recognized by management for providing exceptional customer service.
  • Maintained updated knowledge through continuing education and advanced training.
  • Completed day-to-day duties accurately and efficiently.
  • Displayed strong telephone etiquette, effectively handling difficult calls.
  • Identified needs of customers promptly and efficiently.
  • Exceeded customer satisfaction by finding creative solutions to problems.
  • Understood and followed oral and written directions.

Diesel Mechanic

AMID
Houston, TX
09.2018 - 12.2021
  • Tested electronic computer components in automobiles to determine proper operation.
  • Ensured that all tools were properly cleaned after use.
  • Disassembled defective units to diagnose malfunctions and repair them accordingly.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Removed old oil, replace filters and added correct amount of new [Type] oil.
  • Read and interpreted standards, drawings and blueprints and pinpointed inspection needs for repair work.
  • Rebuilt faulty hydraulic systems including pumps and cylinders.
  • Maintained accurate records of all services performed on diesel engines.
  • Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
  • Examined brake systems for proper operation; replaced pads or shoes when needed.
  • Repaired and serviced air conditioning, heating and electrical systems.
  • Followed green operational practices to conserve water and energy and reduce solid waste.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Welded broken metal parts using oxyacetylene torches and electric arc welders.
  • Diagnosed mechanical problems and made necessary repairs.
  • Checked all fluid levels regularly; topped off when necessary.
  • Worked with a team of mechanics to complete projects efficiently within time limits.
  • Reviewed repairs with customers and advocated for vehicle safety.
  • Installed new parts such as radiators, injectors, hoses, belts, alternators, starters .
  • Completed standard inspections to assess wear and damage to vehicles.
  • Conducted test drives before and after repair services.
  • Installed new vehicle systems and components.
  • Worked well with dispatchers to communicate route and schedule changes.
  • Performed pre- and post-trip safety and maintenance checks to mitigate hazards.
  • Responded quickly to customer complaints and gathered pertinent information to make educated decisions for remediation.
  • Communicated with dispatchers regarding pick up and delivery instructions.
  • Conducted regular vehicle inspections for any signs of wear or damage.
  • Cleaned truck interior and exterior regularly in order to keep it looking presentable at all times.
  • Promoted positive customer service by delivering on-time shipments and fully resolving issues.
  • Maneuvered trucks into tight areas, maintaining proper positioning for loading and unloading.
  • Responded quickly to emergency situations by following established protocols.
  • Provided customer service support as needed in order to maintain positive relationships with clients.
  • Monitored load security during transport to prevent shifting or loss of cargo.
  • Reported any mechanical problems encountered while hauling goods to the supervisor for repair and replacement.
  • Prepared detailed reports outlining trip, vehicle and passenger details.
  • Updated logs with timely and accurate information meet internal requirements and DOT recordkeeping demands.
  • Notified customers of potential late deliveries, which resulted in [Number]% decrease in calls to company support line.
  • Verified accuracy of loading documents prior to departure from site location.
  • Fulfilled back haul orders and spotted trailers in loading yard.
  • Kept track of fuel consumption levels and vehicle maintenance needs.
  • Planned efficient routes and adjusted strategies based on current weather and traffic information.
  • Increased inventory longevity, inspecting and repairing equipment to promote effective mechanical and safety usage.
  • Inspected trucks and trailers before and after trips and completed basic maintenance for optimal performance.
  • Inspected and maintained vehicle supplies and equipment to ensure vehicles remained in proper working condition.
  • Observed all road rules and regulations and maintained safe driving record when transporting tanker trucks full of crude oil.
  • Developed knowledge of local roadways in order to plan efficient routes for deliveries.
  • Obtained signatures needed to complete and process paperwork.
  • Managed unexpected emergencies and route changes with calm and professionalism.
  • Liaised with customers and other drivers professionally, promoting positive company representation.
  • Maintained safe driving habits to protect property and general public on roadways.
  • Implemented daily DOT pre-trip inspections to reduce risks or delivery delays.
  • Adhered to all traffic laws while driving on public roads to ensure safety of self and others.

Painter

James Beene
San Angelo, TX
01.2017 - 09.2018
  • Wore protective clothing such as masks, respirators and gloves.
  • Prepared sheetrock, metal and wood surfaces for painting.
  • Operated airless spray equipment and motorized lifts.
  • Filled cracks, holes or joints using caulking guns or putty knives.
  • Completed diverse repairs on commercial and residential buildings and equipment.
  • Monitored paint supplies, placing orders whenever needed and properly and safely disposed of old paint.
  • Removed old wall coverings before applying new ones.
  • Painted walls and other surfaces using traditional and sprayer methods and worked efficiently to complete jobs within required timeframes.
  • Constructed scaffolding and supports to complete work above ground-level.
  • Covered floors before prepping, priming and painting walls and ceilings to protect them from chemicals and paint.
  • Applied paints, sealers and solvents to plaster, sheetrock, concrete and wood.
  • Applied primers or sealers to prepare bare wood or metal for finish coats.
  • Washed and treated surfaces with oil, turpentine or other preparations.
  • Ensured proper ventilation while using solvents or oil-based paints.
  • Mixed and matched paint, stain or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.
  • Applied primers and sealers to prepare new surfaces for painting.
  • Removed old finishes by stripping, sanding or using water or abrasive blasting.
  • Cleaned up job sites after completion of projects.
  • Smoothed and finished surfaces on walls, trim and cabinetry.
  • Identified surface to be covered and characteristics of finish to properly select roller, power sprayer and right size brush.
  • Applied paint with brushes, rollers, spray guns, or other equipment.
  • Selected appropriate paint colors based on customer preferences.
  • Primed, smoothed and cleaned trim, walls and ceilings to prepare for painting tasks.
  • Measured, cut, and installed wallpaper.
  • Used ladders and scaffolds to reach high walls and ceilings.
  • Inspected work sites to measure dimensions, lay out work and estimate materials for each job.
  • Mixed paints and solutions and monitored consistencies.
  • Estimated cost of materials needed for the project.
  • Documented progress and provided estimated completion time for clients.
  • Removed pictures, door knobs or electric switch covers prior to painting.
  • Completed high-volume weekly painting jobs with consistently positive customer feedback.
  • Chose correct brushes and materials for jobs and purchased from vendors.
  • Spread undercoats and finish materials using rollers and spray equipment.

Crude Oil Hauler

C P Energy
Jal, NM
04.2016 - 01.2017
  • Worked well with dispatchers to communicate route and schedule changes.
  • Performed pre- and post-trip safety and maintenance checks to mitigate hazards.
  • Responded quickly to customer complaints and gathered pertinent information to make educated decisions for remediation.
  • Communicated with dispatchers regarding pick up and delivery instructions.
  • Conducted regular vehicle inspections for any signs of wear or damage.
  • Cleaned truck interior and exterior regularly in order to keep it looking presentable at all times.
  • Promoted positive customer service by delivering on-time shipments and fully resolving issues.
  • Maneuvered trucks into tight areas, maintaining proper positioning for loading and unloading.
  • Responded quickly to emergency situations by following established protocols.
  • Reported any mechanical problems encountered while hauling goods to the supervisor for repair and replacement.
  • Prepared detailed reports outlining trip, vehicle and passenger details.
  • Notified customers of potential late deliveries, which resulted in [Number]% decrease in calls to company support line.
  • Verified accuracy of loading documents prior to departure from site location.
  • Fulfilled back haul orders and spotted trailers in loading yard.
  • Kept track of fuel consumption levels and vehicle maintenance needs.

Crude Oil Hauler

Xcaliber logistics
Jal, NM
01.2016 - 04.2016
  • Responded quickly to customer complaints and gathered pertinent information to make educated decisions for remediation.
  • Performed pre- and post-trip safety and maintenance checks to mitigate hazards.
  • Worked well with dispatchers to communicate route and schedule changes.
  • Communicated with dispatchers regarding pick up and delivery instructions.
  • Completed vehicle recoveries, private tows and involuntary retrievals in collaboration with businesses and police departments.
  • Conducted regular vehicle inspections for any signs of wear or damage.
  • Cleaned truck interior and exterior regularly in order to keep it looking presentable at all times.
  • Promoted positive customer service by delivering on-time shipments and fully resolving issues.
  • Maneuvered trucks into tight areas, maintaining proper positioning for loading and unloading.
  • Responded quickly to emergency situations by following established protocols.
  • Provided customer service support as needed in order to maintain positive relationships with clients.
  • Monitored load security during transport to prevent shifting or loss of cargo.
  • Prepared detailed reports outlining trip, vehicle and passenger details.
  • Updated logs with timely and accurate information meet internal requirements and DOT recordkeeping demands.
  • Notified customers of potential late deliveries, which resulted in [Number]% decrease in calls to company support line.
  • Fulfilled back haul orders and spotted trailers in loading yard.
  • Kept track of fuel consumption levels and vehicle maintenance needs.
  • Increased inventory longevity, inspecting and repairing equipment to promote effective mechanical and safety usage.
  • Inspected trucks and trailers before and after trips and completed basic maintenance for optimal performance.
  • Inspected and maintained vehicle supplies and equipment to ensure vehicles remained in proper working condition.
  • Observed all road rules and regulations and maintained safe driving record when transporting tanker trucks full of crude oil.
  • Developed knowledge of local roadways in order to plan efficient routes for deliveries.
  • Implemented daily DOT pre-trip inspections to reduce risks or delivery delays.
  • Added fluids, checked tires and kept interior and exterior spotless as part of vehicle upkeep.

Vacuum Truck Driver

A.B Barlett
Midland, TX
01.2015 - 01.2016
  • Maintained safe driving habits to protect property and general public on roadways.
  • Communicated with customers regarding delivery schedules and other needs.
  • Maintained ongoing communications with [Job title] in operations center to keep teammates informed.
  • Fulfilled back haul orders and spotted trailers in loading yard.
  • Implemented daily DOT pre-trip inspections to reduce risks or delivery delays.
  • Coordinated with dispatch to receive updates, communicate efficient routes and convey delays.
  • Adhered strictly to company policies concerning driver hours of service regulations.
  • Performed regular inspections on equipment, including pumps, hoses, valves, filters, and gauges.
  • Notified customers of potential late deliveries, which resulted in [Number]% decrease in calls to company support line.
  • Provided assistance during wellsite operations as needed.
  • Conducted daily pre-trip inspections to ensure the safety and reliability of equipment.
  • Loaded and unloaded materials using appropriate tools such as straps and lift gates when necessary.
  • Assisted with loading and unloading water tanks when needed.
  • Cleaned interior cabins after each trip according to company standards for sanitation purposes.
  • Lubricated and maintained machines prior to setup, calibration and operation.
  • Paid close attention to operations schedules and timelines to achieve targets and maintain optimal productivity levels.
  • Connected pump hoses and pipelines to transfer material.
  • Monitored gauges and pressure pumps throughout tasks to check safety and operational performance.
  • Performed regular maintenance checks on pumps, hoses, valves, and other related equipment.
  • Maintained accurate records of deliveries, including manifests and invoices.
  • Collaborated with coworkers to update safety practices and uphold effective safety behaviors.
  • Operated heavy-duty vehicles in a safe and efficient manner over long distances.
  • Developed strong working relationships with customers through courteous interactions and timely deliveries.
  • Delivered sample solutions for laboratory analysis.
  • Monitored fuel levels throughout routes to ensure proper supply levels were maintained.
  • Reported damages or malfunctions of equipment immediately upon discovery.
  • Responded to emergency calls as required in order to deliver water during extreme weather events or other disasters.
  • Loaded and unloaded water tanks onto truck beds for transport.
  • Understood and followed oral and written directions.

Education

High School Diploma -

Lake View High School
San Angelo, TX
05-1982

Some College (No Degree) - Architectural And Building Sciences

ASU
San Angelo, TX

Skills

  • Quality Assurance
  • Vehicle Inspections
  • Hydraulic Repair
  • Inventory Management
  • Hand and Power Tools
  • Mechanical Systems
  • Work Order Management
  • System Upgrades
  • Component Repairs
  • Fleet Maintenance
  • Repairs Knowledge
  • Grease and Lubricant Application
  • Diagnostics
  • Hydraulic Systems
  • Troubleshooting Skills
  • Engine Repair
  • Computerized Diagnostics
  • QC
  • Deadline-Driven
  • Wheel Alignment
  • Documentation and Reporting
  • Diagnostic Abilities
  • Maintenance and Repairs
  • OSHA
  • Fluid Level Testing
  • Preventive Maintenance
  • Fleet Management
  • Electrical Systems
  • Suspension Systems
  • Diagnostics Systems
  • Cooling Systems
  • Performance Tuning
  • Road-Worthiness Evaluations
  • Safety Procedures
  • Brake Systems
  • Heavy Equipment Repair
  • Battery Testing
  • Safety Management
  • Power Steering Repair
  • Recordkeeping
  • Workplace Safety

Accomplishments

Safety Awards received while driving trucks.

Certification

Certified in Brakes

Certified in A/C

CDL License

Hazmat License

Certified in Wheel End Replacement

Timeline

Mechanic

New Tex Trucking
04.2022 - 10.2023

Diesel Mechanic

Transoil marketing llc
12.2021 - 04.2022

Diesel Mechanic

AMID
09.2018 - 12.2021

Painter

James Beene
01.2017 - 09.2018

Crude Oil Hauler

C P Energy
04.2016 - 01.2017

Crude Oil Hauler

Xcaliber logistics
01.2016 - 04.2016

Vacuum Truck Driver

A.B Barlett
01.2015 - 01.2016

High School Diploma -

Lake View High School

Some College (No Degree) - Architectural And Building Sciences

ASU

Similar Profiles

CREATE PROFILE
Garland Morgan