Summary
Overview
Work History
Education
Skills
Websites
Certification
Languages
Timeline
Generic

Garza Alberto

Edinburg,TX

Summary

Adept at enhancing operational efficiency and safety, my tenure at Altair Strickland showcases a proven track record in pipefitting and pressure testing, alongside a strong commitment to worksite safety. Leveraging hand and power tools skillfully, I've significantly contributed to project successes, embodying multitasking abilities and a mechanical aptitude that consistently exceed employer expectations.

Skilled boilermaker with solid safety record and over 5+ years of experience in accurately performing boilermaker repair and maintenance duties. Flexible and diligent with positive attitude and willingness to go above and beyond. Certified in boilermaker .

Structural ironwork professional prepared to contribute with extensive hands-on experience in steel fabrication and installation. Valued for reliability and adaptability in dynamic work environments, with strong focus on team collaboration and achieving results. Skilled in blueprint interpretation, welding, and rigging.

Knowledgeable electrician with solid background in electrical systems and installations. Proven ability to troubleshoot and repair complex electrical issues, ensuring safety and efficiency. Demonstrated effective problem-solving and critical thinking skills in high-pressure environments.

Professional drilling expert with proven track record in operating and maintaining drilling equipment. Strong focus on team collaboration and achieving results. Adaptable and reliable, skilled in problem-solving, safety protocols, and efficient project execution. Known for being dependable, flexible, and consistently delivering high-quality outcomes in challenging environments.

Overview

19
19
years of professional experience
1
1
Certification

Work History

Pipefitter

Altair Strickland
09.2024 - 10.2024
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Threaded pipes using piping machines.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
  • Maintained high-quality standards through consistent attention to detail while fitting pipes according to building code requirements.
  • Improved workflow with efficient pipe system modifications, including cutting, threading, welding, and soldering components as needed.

Pipefitter

Cust O Fab
07.2024 - 09.2024
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Threaded pipes using piping machines.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Promoted a safe work environment by adhering to company safety policies and procedures at all times during pipefitting operations.
  • Contributed to overall company success by maintaining a strong work ethic, adaptability, and commitment to delivering exceptional service on all projects undertaken.

Boilermaker

Cust O Fab
06.2024 - 07.2024
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Reduced potential hazards on-site, enforcing strict compliance with safety protocols and regulations.

Boilermaker

JVIC
03.2024 - 05.2024
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Collaborated with other tradespeople to complete complex projects in a timely manner.

Boilermaker

SWAT
01.2024 - 02.2024
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Inspected equipment, structures and materials to identify cause of errors.
  • Coordinated movement of materials and equipment to job sites.

Structural Ironworker

Zachry Group
10.2023 - 01.2024
  • Examined architectural drawings and building blueprints to determine reinforcement requirements.
  • Complied with OSHA and company safety guidelines for height safety, lock out tag out, confined space, and hazardous material handling.
  • Prioritized safety across job site with specific attention to load suspension, welding, and cutting.
  • Determined size, shape, placement, and material of supports based on blueprints and structural standards.
  • Mitigated structural issues by promptly identifying and reporting any discrepancies in alignment or positioning of installed materials.
  • Enhanced workplace safety through diligent inspections of rigging equipment before use.
  • Maintained a clean work environment, adhering to OSHA regulations for safe operation at all times.
  • Elevated team performance through strong collaboration with colleagues on various tasks and projects.
  • Erected structural steel and iron frameworks for bridges, buildings and other structures.

Pipefitter

JVIC
08.2023 - 10.2023
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Threaded pipes using piping machines.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Promoted a safe work environment by adhering to company safety policies and procedures at all times during pipefitting operations.
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Utilized specialized tools and equipment for precise pipefitting processes, ensuring optimal results for each project.

Boilermaker

Omsted
08.2023 - 08.2023
  • Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Inspected equipment, structures and materials to identify cause of errors.

Structural Ironworker

Zachry Group
05.2023 - 08.2023
  • Examined architectural drawings and building blueprints to determine reinforcement requirements.
  • Complied with OSHA and company safety guidelines for height safety, lock out tag out, confined space, and hazardous material handling.
  • Prioritized safety across job site with specific attention to load suspension, welding, and cutting.
  • Determined size, shape, placement, and material of supports based on blueprints and structural standards.
  • Streamlined workflow by effectively organizing tools, equipment, and materials needed for daily operations.
  • Optimized assembly processes with precise measurements and cutting of steel materials.
  • Mitigated structural issues by promptly identifying and reporting any discrepancies in alignment or positioning of installed materials.
  • Enhanced workplace safety through diligent inspections of rigging equipment before use.

Boilermaker

Cust O Fab
01.2023 - 04.2023
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Inspected equipment, structures and materials to identify cause of errors.
  • Utilized specialized tools and machinery to complete repairs and installation.
  • Elevated quality of workmanship, adhering strictly to blueprints and specifications for each project.

Electrician

Bay
11.2022 - 01.2023
  • Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
  • Installed and wired electrical transformers, service panels, and circuit breakers.
  • Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
  • Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
  • Stored and maintained power tools and equipment for each job.
  • Developed strong working relationships with clients through consistent professionalism, reliability, and transparency during projects.

Boilermaker

Cust O Fab
08.2022 - 10.2022
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Maintained compliance with all safety procedures from both client and employer.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Upheld company reputation for excellence by consistently delivering high-quality workmanship that met or exceeded client expectations.
  • Inspected equipment, structures and materials to identify cause of errors.

Pipefitter

JVIC
05.2022 - 07.2022
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Threaded pipes using piping machines.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Promoted a safe work environment by adhering to company safety policies and procedures at all times during pipefitting operations.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.

Boilermaker

Cust O Fab
01.2022 - 04.2022
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Maintained compliance with all safety procedures from both client and employer.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Built and repaired process tanks, storage tanks and water treatment tanks.
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.

Boilermaker

Cust O Fab
11.2021 - 12.2021
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Built and repaired process tanks, storage tanks and water treatment tanks.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.

Boilermaker

Wyatt
08.2021 - 11.2021
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Built and repaired process tanks, storage tanks and water treatment tanks.
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Inspected equipment, structures and materials to identify cause of errors.
  • Coordinated movement of materials and equipment to job sites.

Pipefitter Helper

Wyatt
06.2021 - 07.2021
  • Measured, cut, threaded and assembled new pipe to place assembled pipe in hangers or other supports.
  • Improved pipefitting efficiency by assisting in the assembly, installation, and maintenance of piping systems.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Enhanced safety measures by following proper procedures when handling hazardous materials during pipe installations.
  • Set sleeves or inserts to provide support for pipes.
  • Tested piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks.
  • Mounted brackets and hangers on walls and ceilings to hold pipes in place.

Driller

H&P Drilling
08.2018 - 12.2020
  • Reduced downtime through proactive maintenance and timely repair of drilling equipment.
  • Improved safety on the rig by enforcing strict adherence to safety protocols and conducting regular safety drills.
  • Supervised drill site setup, ensuring proper installation and alignment of drilling equipment for maximum operational efficiency.
  • Supported management of all drilling and rig move operations
  • Increased overall productivity with efficient crew management and clear communication of drilling objectives.
  • Trained and supervised all site personnel.
  • Monitored drilling operations and machines.
  • Maintained compliance requirements, work instructions and program procedures to promote safety.
  • Facilitated seamless handovers between shifts by maintaining clear documentation and concise shift reports, ensuring smooth continuation of operations without unnecessary delays.
  • Monitored employee safety and coached workers on safety standards and procedures to prevent injuries.
  • Maintained compliance with industry regulations, adhering to environmental guidelines and reporting requirements throughout all stages of the drilling process.
  • Provided expertise to support day drilling operations.
  • Achieved precise drilling targets by utilizing advanced directional drilling methods and monitoring real-time data.
  • Developed a strong working relationship with drilling contractors and service providers, fostering an environment of collaboration and open communication to achieve project goals.
  • Actively participated in pre-drill meetings, contributing valuable insights based on past experience to optimize well design parameters.

Motorman

H&P Drilling
04.2013 - 08.2018
  • Managed inventory of spare parts, tools, and consumables, avoiding unnecessary delays in operations due to lack of resources.
  • Enhanced drilling efficiency with regular inspections of motors, generators, and other related equipment.
  • Increased equipment lifespan by performing routine maintenance on drilling machinery and tools.
  • Demonstrated flexibility by adapting quickly to changing conditions or priorities while maintaining focus on key objectives throughout the duration of each project assigned.

Floorhand, Work Rig

H&P Drilling
04.2010 - 04.2013
  • Promoted a safe working environment by conducting daily safety meetings and reporting potential hazards to supervisors.
  • Streamlined deck operations by coordinating material handling tasks such as loading supplies onto the rig floor using cranes or hoists.
  • Assisted in the safe operation of the work rig through adherence to safety protocols and procedures.
  • Collaborated with other crew members to perform tripping operations, minimizing operational delays.
  • Contributed to efficient drilling progress by maintaining clean and organized work areas on the rig floor.
  • Supported successful well completions by assembling and disassembling downhole tools and equipment.
  • Complied with company guidelines and industry regulations to maintain a safe and efficient work environment on the rig floor.
  • Coordinated with derrick hands to ensure secure hoisting of pipes during drilling operations for increased safety measures.
  • Improved crew communication by effectively collaborating with team members during high-pressure situations.
  • Reduced equipment downtime by performing regular maintenance and repairs as needed.
  • Maintained optimal rig performance through effective troubleshooting of machinery malfunctions or issues.
  • Prevented environmental hazards through proper handling, containment, and disposal of drilling fluids and waste materials.
  • Ensured accurate well measurements by assisting in surveying activities and recording data for analysis.
  • Managed drill string connections, ensuring secure attachments for seamless operations.

Electrical Apprentice

Triad Electric & Controls
01.2010 - 04.2010
  • Worked under supervision of journeyman electrician to learn trade and develop electrical knowledge.
  • Terminated wiring and connected circuits with correct techniques.
  • Gained proficiency in operating various power tools such as drills, saws, crimpers, and wire strippers for efficient completion of electrical tasks.
  • Pulled EMT and PVC conduit wire according to plans and code requirements.
  • Understood and used proper tools and equipment to install and maintain electrical systems.

Electrician Top Helper

ISC
01.2009 - 12.2009
  • Assisted in the installation of electrical systems for new construction projects, adhering to strict building codes and regulations.
  • Troubleshot various electrical issues for clients using a methodical approach to ensure accurate diagnosis and repair solutions.
  • Fabricated specific electrical component parts and assemblies.
  • Reduced power outages and downtime by promptly addressing electrical issues and performing necessary repairs.
  • Maintained safety of electrical work and systems using test meters.
  • Enhanced safety measures by implementing thorough electrical system inspections and maintenance procedures.
  • Developed strong relationships with clients through excellent communication skills leading to repeat business and referrals.

Electrician Helper

MMR
09.2008 - 12.2009
  • Pulled wire through conduits and through holes in walls and floors.
  • Organized materials and tools in to maintain clean and neat work areas.
  • Helped complete system installations, digging trenches, and breaking up concrete.
  • Improved workplace organization by maintaining a clean and hazard-free environment for all team members during projects.
  • Consistently followed safety procedures when operating power tools or handling hazardous materials, minimizing risk of injury among team members.
  • Learned to expertly use hand and power equipment for hoisting, drilling, [Type] and [Type].

Boilermaker

PFS
02.2008 - 04.2008
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Built and repaired process tanks, storage tanks and water treatment tanks.
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.

Structural Ironworker

Turner
09.2007 - 02.2008
  • Complied with OSHA and company safety guidelines for height safety, lock out tag out, confined space, and hazardous material handling.
  • Examined architectural drawings and building blueprints to determine reinforcement requirements.
  • Determined size, shape, placement, and material of supports based on blueprints and structural standards.
  • Reduced project delays by skillfully operating heavy machinery for efficient material handling.
  • Streamlined workflow by effectively organizing tools, equipment, and materials needed for daily operations.
  • Strengthened structural integrity by expertly welding and fabricating metal components.

Electrician Helper

MMR
04.2006 - 07.2007
  • Pulled wire through conduits and through holes in walls and floors.
  • Organized materials and tools in to maintain clean and neat work areas.
  • Helped complete system installations, digging trenches, and breaking up concrete.
  • Improved workplace organization by maintaining a clean and hazard-free environment for all team members during projects.

Education

EHS
Edinburg, TX

Skills

  • Worksite safety
  • Pipefitting
  • Installation and maintenance
  • Pipe threading
  • Pressure testing
  • Hand and power tools
  • Systems troubleshooting
  • Hydraulic systems
  • Project estimation and bidding
  • Hydraulics
  • Pneumatic and hydraulic equipment
  • Leak detection
  • Valve installation
  • Pipe cutting
  • OSHA rules and regulations
  • Cutting and threading
  • Piping layout
  • Piping installation
  • Skilled with both hand and power tools
  • Layout planning
  • Systems testing
  • Safety inspection
  • Multitasking
  • Multitasking Abilities
  • Basic math aptitude
  • Good mechanical aptitude
  • Respond to emergencies

Certification

  • NCCER Boilermaker
  • Osha 10
  • Electrician
  • Well Control

Languages

English
Full Professional
Spanish
Full Professional

Timeline

Pipefitter

Altair Strickland
09.2024 - 10.2024

Pipefitter

Cust O Fab
07.2024 - 09.2024

Boilermaker

Cust O Fab
06.2024 - 07.2024

Boilermaker

JVIC
03.2024 - 05.2024

Boilermaker

SWAT
01.2024 - 02.2024

Structural Ironworker

Zachry Group
10.2023 - 01.2024

Pipefitter

JVIC
08.2023 - 10.2023

Boilermaker

Omsted
08.2023 - 08.2023

Structural Ironworker

Zachry Group
05.2023 - 08.2023

Boilermaker

Cust O Fab
01.2023 - 04.2023

Electrician

Bay
11.2022 - 01.2023

Boilermaker

Cust O Fab
08.2022 - 10.2022

Pipefitter

JVIC
05.2022 - 07.2022

Boilermaker

Cust O Fab
01.2022 - 04.2022

Boilermaker

Cust O Fab
11.2021 - 12.2021

Boilermaker

Wyatt
08.2021 - 11.2021

Pipefitter Helper

Wyatt
06.2021 - 07.2021

Driller

H&P Drilling
08.2018 - 12.2020

Motorman

H&P Drilling
04.2013 - 08.2018

Floorhand, Work Rig

H&P Drilling
04.2010 - 04.2013

Electrical Apprentice

Triad Electric & Controls
01.2010 - 04.2010

Electrician Top Helper

ISC
01.2009 - 12.2009

Electrician Helper

MMR
09.2008 - 12.2009

Boilermaker

PFS
02.2008 - 04.2008

Structural Ironworker

Turner
09.2007 - 02.2008

Electrician Helper

MMR
04.2006 - 07.2007

EHS

Similar Profiles

CREATE PROFILE
Garza Alberto