Greg Stuart
Monroe,WI.
Summary
Safety-oriented Electronic Technician versed in handling multiple tasks in fast-paced environment. Talented at inspecting equipment for proper performance and training end-users on electronic controllers. Conscientious and coordinated with excellent time management abilities. Resourceful Electronics Technician with advanced expertise in component-level circuit analysis and fault diagnosis skills.
Overview
18
18
years of professional experience
Work History
Electrician /Electronic Technician
R.R. Donnelley
Monroe, Wisconsin
08.2021 - Current
- Reviewed building diagrams and blueprints to determine errors in electronic equipment installations.
- Analyzed and interpreted test data and adjusted, calibrated and aligned circuitry.
- Conducted, maintained, tested and repaired PLC'S and VFD'S electronic components, parts, equipment, and systems.
- Recommended changes in circuitry or installation specifications to simplify assembly and maintenance.
- Assembled electrical and electronic systems and prototypes according to engineering data and knowledge of electrical principles, using hand tools and measuring instruments.
- Fixed circuit boards and wire harness problems using schematics, wiring diagrams and testing instruments.
- Reviewed and interpreted service manuals, specifications, wiring diagrams and blueprints.
- Improved production by studying and applying build and test applications.
- Designed and constructed new equipment to meet engineering experiment requirements.
- Kept equipment working optimally by replacing loose, worn and defective parts.
- Improved equipment performance through skilled calibration and testing.
- Computed cost estimates for labor and materials.
- Traced faults in circuits and components to isolate failures and remove components.
- Used soldering skills to connect components securely.
- Adhered to and kept team in line with established safety regulations and protocols when working on ladders and operating power tools, providing important protection for personnel and customers.
Industrial Electrician
Generac Power Systems
Whitewater, WI
10.2020 - 08.2021
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Connected wires to circuit breakers, transformers, and other components.
- Repaired and replaced equipment, electrical wiring and fixtures.
- Attached power cables to equipment such as electric range and motor.
- Tested circuit continuity to determine electrical compatibility and component safety.
- Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
Service Technician
Lees Foodservice Parts
Addison, IL
02.2019 - 07.2020
- Diagnosed and troubleshot problems, repairing and restoring machines to peak performance.
- Inspected equipment to diagnose operational issues.
- Explained diagnostic findings to customers and outlined repair or service options.
- Adhered to safety protocols and policies to reduce workplace hazards.
- Installed new equipment and explained operation and routine maintenance protocols to customers.
- Cleaned and lubricated parts to keep equipment operating at peak performance.
- Reviewed technical documentation to complete equipment maintenance and repair.
- Documented all changes and actions in computer-based tracking system.
Industrial Maintenance Technician
SSI TECHNOLOGIES
Janesville, WI
07.2018 - 11.2018
- Dismantled electrical machinery to replace faulty switches and electrical and mechanical system elements.
- Diagnosed, repaired and replaced faulty electrical, electronic and mechanical components to maintain plant safety.
- Troubleshot programs and maintained programmable logic controllers.
- Prepared building components and systems for trades units and contractors and disassembled and installed equipment and fixtures.
- Evaluated engineering proposals, shop drawings and design comments for sound practice and conformance with established safety and design criteria.
- Adhered to safety policies, procedures and regulatory criteria to maximize preventive controls.
- Used problem-solving skills to alleviate issues efficiently with minimal supervision.
- Followed work orders and specifications for machine and equipment replacement, repair or maintenance.
- Troubleshot equipment breakdowns and performed preventive maintenance.
- Quickly responded to internal service calls regarding malfunctioning equipment and completed repairs.
- Performed electrical and mechanical repairs of production equipment to minimize downtime.
Industrial Electrician
Rockford Silk Screen
Loves Park, IL
09.2017 - 05.2018
- Program changes on Digital Flatbed Printers.
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Connected wires to circuit breakers, transformers, and other components.
- Tested circuit continuity to determine electrical compatibility and component safety.
- Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Studied building schematics to determine location of wiring and equipment.
- Installed 120/208 volt systems and 347/600 volt systems.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
Industrial Electrician
Snakking Corporation
Freeport, IL.
02.2016 - 07.2017
- Assist Engineering Department with new equipment Install
- Controls systems
- PLC program changes and repair.
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Connected wires to circuit breakers, transformers, and other components.
- Repaired and replaced equipment, electrical wiring and fixtures.
- Tested circuit continuity to determine electrical compatibility and component safety.
- Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
- Prepared sketches and blueprints.
- Inspected transformers and circuit breakers for malfunctions.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
- Studied building schematics to determine location of wiring and equipment.
- Installed 120/208 volt systems and 347/600 volt systems.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
Industrial Electrician
Futura Industries
Clearfield, UT
01.2011 - 07.2014
- Electrical wiring, repair, install, programming
- Weekend Lead Technician
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Connected wires to circuit breakers, transformers, and other components.
- Tested circuit continuity to determine electrical compatibility and component safety.
- Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
- Prepared sketches and blueprints.
- Inspected transformers and circuit breakers for malfunctions.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
- Studied building schematics to determine location of wiring and equipment.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
Industrial Electrician
Condies Foods
Kearns, UT
01.2007 - 10.2011
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Connected wires to circuit breakers, transformers, and other components.
- Repaired and replaced equipment, electrical wiring and fixtures.
- Tested circuit continuity to determine electrical compatibility and component safety.
- Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
- Prepared sketches and blueprints.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
- Studied building schematics to determine location of wiring and equipment.
- Installed 120/208 volt systems and 347/600 volt systems.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
- Managed business report generation, recordkeeping and supply ordering.
- Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
Proprietor
Stuart Handyman Service
Pomona, CA.
05.2002 - 02.2007
- Residential and Industrial Electrical installs and repair.
- Devised processes to boost long-term business success and increase profit levels.
- Set, enforced and optimized internal policies to maintain responsiveness to demands.
- Consulted with customers to assess needs and propose optimal solutions.
- Kept all building areas and equipment functional and well-organized to promote business performance.
- Input income and expense details into database to track business finances and address variances.
- Developed and managed relationships with vendors and suppliers.
- Provided customer service on accounts and resolved problems.
Education
No Degree - Programmable Logic Control
Davis Applied Technology College
Kaysville, UT10.2013
GED -
Adult Education
Fort Myers, FL06.1994
Skills
- Records Compilation and Maintenance
- Blueprint Reading
- Specialized Testing Equipment
- System Log Maintenance
- Diagnostic Software Monitoring
- Electrical Systems
- Staff Management
- Electronic Design
- Equipment Maintenance
- Programmable Logic Controllers
- Megger Meter
- Wiring Diagrams
Timeline
Electrician /Electronic Technician
R.R. Donnelley
08.2021 - Current
Industrial Electrician
Generac Power Systems
10.2020 - 08.2021
Service Technician
Lees Foodservice Parts
02.2019 - 07.2020
Industrial Maintenance Technician
SSI TECHNOLOGIES
07.2018 - 11.2018
Industrial Electrician
Rockford Silk Screen
09.2017 - 05.2018
Industrial Electrician
Snakking Corporation
02.2016 - 07.2017
Industrial Electrician
Futura Industries
01.2011 - 07.2014
Industrial Electrician
Condies Foods
01.2007 - 10.2011
Proprietor
Stuart Handyman Service
05.2002 - 02.2007
No Degree - Programmable Logic Control
Davis Applied Technology College
GED -
Adult Education
Similar Profiles
Kimberly BielyKimberly Biely
Machine Operator at R.R. DonnelleyMachine Operator at R.R. Donnelley
Kerstin RobelKerstin Robel
Lead Machine Operator at R.R DonnelleyLead Machine Operator at R.R Donnelley
Mohammed ChowdhuryMohammed Chowdhury
Digital Print Operator at R.R Donnelley And Sons CompanyDigital Print Operator at R.R Donnelley And Sons Company