GREGORIO SANCHEZ JR
Ocean Springs,MS
Summary
Motivated Electrician who completes projects on time and uses professional level skill and trade knowledge to demonstrate superior performance on job sites.
Overview
13
13
years of professional experience
Work History
Electrical Supervisor
VT Halter Marine
Pascagoula, MS
05.2021 - Current
- Organized, led and trained crew members to complete projects within established guidelines and timeframes.
- Managed construction workflow to drive productivity.
- Trained workers in proper methods, equipment operation and safety procedures.
- Communicated with stakeholders on job milestones.
- Directed projects according to schedule and quality demands.
- Calculated materials and labor required to complete jobs on-schedule and prepared estimates.
- Oversaw daily operations at site, keeping team production moving at optimal pace.
- Used Microsoft Word and other software tools to create documents and other communications.
- Oversaw daily operations to ensure high levels of productivity.
Industrial Electrician Foreman
MMR
Commerce-SK Battery Project, GA
10.2020 - 04.2021
- Connected wires to circuit breakers, transformers, and other components.
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Repaired and replaced equipment, electrical wiring and fixtures.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
- Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment, including switches, relays and circuit breaker panels.
- Installed 120/208 volt systems and 347/600 volt systems.
Marine Electrician
Cts Inc.
Pascagoula, MS
01.2020 - 09.2020
- Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
Industrial Electrician
HTE Inc.
Pascagoula-Ingalls Expansion Project, MS
08.2019 - 01.2020
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Installed 120/208 volt systems and 347/600 volt systems.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
- Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
Industrial Electrician
MMR
Savannah-Kinder Morgan LNG Plant., GA
01.2019 - 08.2019
- Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
- Worked with various types of cableways, conduits and other electrical raceways.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
- Enhanced quality control by inspecting condition of equipment and tools.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
- Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
Marine electrician
W-Industries Inc.
Ingleside, TX
10.2018 - 01.2019
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Installed 120/208 volt systems and 347/600 volt systems.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Studied building schematics to determine location of wiring and equipment.
Industrial Electrician
Bisso Marine LLC
Sulfur, LA
08.2018 - 10.2018
- Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Worked with various types of cableways, conduits and other electrical raceways.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
- Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
Industrial Electrician
MMR
Belmont, NC, Project-Duke Energy Steam station power plant
06.2018 - 08.2018
- Worked with various types of cableways, conduits and other electrical raceways.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
- Run cable different size and tipe
- Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
Industrial Electrician
EIU Inc
Oklahoma , Project-Canyon gas plant
02.2018 - 05.2018
- Fabricated specific electrical component parts and assemblies.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
- Tested equipment tools such as oscilloscopes, ammeters and test lamps.
- Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
- Worked with various types of cableways, conduits and other electrical raceways.
- Install Heat trace on piping and terminate
- Terminate Rio's
- Measured devices, including analyzers, amp meters and volt-ohm meters.
Marine Electrician
MMR GROUP
Big foot project, TEXAS
01.2017 - 01.2018
- Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
- Worked with various types of cableways, conduits and other electrical raceways.
- Worked extended hours on weekday and weekend projects.
- Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
- Consistently updated knowledge of safety requirements and policies.
- Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
- Measured devices, including analyzers, amp meters and volt-ohm meters.
- Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
- Tested equipment tools such as oscilloscopes, ammeters and test lamps.
- Completed tear-down of existing structures and prepared for new construction.
Marine Electrician
Meitec Inc
MOBILE, AL
01.2018 - 01.2018
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
- Worked with various types of cableways, conduits and other electrical raceways.
- Worked extended hours on weekday and weekend projects.
- Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
- Consistently updated knowledge of safety requirements and policies.
- Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
- Measured devices, including analyzers, amp meters and volt-ohm meters.
- Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
- Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Industrial Electrician
MMR Group, Inc.
Aleris project, KY
10.2016 - 12.2016
- Read blueprints or technical diagrams. Install and maintain wiring, control, and lighting systems.
- Installing, testing, and maintaining electrical wiring systems.
- Worked with various types of cableways, conduits and other electrical raceways.
- Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
- Measured devices, including analyzers, amp meters and volt-ohm meters.
- Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Marine Electrician
IMIS.
Diferent projects, LA, MS, and TX
03.2012 - 10.2016
- Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
- Fabricated specific electrical component parts and assemblies.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
- Worked with various types of cableways, conduits and other electrical raceways.
- Updated service record files on equipment drawings and history.
- Recorded the respective measurements for each project.
- Worked extended hours on weekday and weekend projects.
- Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
- Consistently updated knowledge of safety requirements and policies.
- Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
- Measured devices, including analyzers, amp meters and volt-ohm meters.
- Tested equipment tools such as oscilloscopes, ammeters and test lamps.
- Completed tear-down of existing structures and prepared for new construction.
Education
Building Trades - Electrical
Texas Southmost College
Brownsville, TX2005
Skills
- Using Power Tools for Drilling and Cutting
- Safety procedures knowledge
- Strong mechanical aptitude
- Basic math and measuring aptitude
- Dependable and reliable
- Effective at multi-tasking
- Works well independently
- Capable of heavy lifting
- Terminating and Setting Switchgear, Panels and other Distribution Equipment
- Testing and Repair of Equipment
- Conducting Systems Tests
- Electrical installations
- Install and Maintain Electrical Equipment, Systems, and Devices
- Installing Fixtures and Electrical Components at Construction Sites
- Interpreting Blueprints and Construction Drawings
- Maintaining Tools and Equipment
- Use of forklift, scissor lift, man lift
Timeline
Electrical Supervisor
VT Halter Marine
05.2021 - Current
Industrial Electrician Foreman
MMR
10.2020 - 04.2021
Marine Electrician
Cts Inc.
01.2020 - 09.2020
Industrial Electrician
HTE Inc.
08.2019 - 01.2020
Industrial Electrician
MMR
01.2019 - 08.2019
Marine electrician
W-Industries Inc.
10.2018 - 01.2019
Industrial Electrician
Bisso Marine LLC
08.2018 - 10.2018
Industrial Electrician
MMR
06.2018 - 08.2018
Industrial Electrician
EIU Inc
02.2018 - 05.2018
Marine Electrician
Meitec Inc
01.2018 - 01.2018
Marine Electrician
MMR GROUP
01.2017 - 01.2018
Industrial Electrician
MMR Group, Inc.
10.2016 - 12.2016
Marine Electrician
IMIS.
03.2012 - 10.2016
Building Trades - Electrical
Texas Southmost College
Similar Profiles
Helen OrgeronHelen Orgeron
Project Administrator/Document Control Administrator for Polar Security Cutter Program at Bollinger Mississippi Shipbuilding (formerly VT Halter Marine, acquired by Bollinger Shipbuilding in 2022)Project Administrator/Document Control Administrator for Polar Security Cutter Program at Bollinger Mississippi Shipbuilding (formerly VT Halter Marine, acquired by Bollinger Shipbuilding in 2022)
Christopher CollierChristopher Collier
Electrical Superintendent at Pennant Marine ServicesElectrical Superintendent at Pennant Marine Services
Georgie HollowayGeorgie Holloway
Customer Success Representative at HalterCustomer Success Representative at Halter