Hal Bloomer

• Worked quickly on emergency requests in order to minimize disruptions to operations.
• Inspected buildings, grounds, and equipment for unsafe or malfunctioning conditions.
• Organized and maintained inventory of spare parts and equipment consumables.
• Carried out building updates such as painting surfaces, replacing fixtures, and reorganizing rooms.
• Operated forklifts and other heavy equipment to load or unload trailers.
• Measured, cut and smoothed stone to maximize fit and complete attractive work for customers.
• Organized patterns, plans and supplies to efficiently prepare for each job.
• Maximized project efficiency by building and installing prefabricated masonry units.
• Operated equipment such as cranes and hoists to lift and guide large stones into place.
• Operated drills, paving breakers, and powered abrasive saws to cut or demolish bricks and concrete.
• Applied sealants or other protective coatings to waterproof or restore concrete surfaces.
• Used polishing and surfacing machines to polish surfaces.
• Installed anchor bolts, steel plates and door sills in freshly poured concrete to provide decorative finish.
• Applied colored marble or stone chips, and powdered steel over surfaces to produce prescribed finishes.
• Shaped, trimmed and cut marble or stone preparatory using power saws and hand tools.
• Laid out wall patterns or foundations using straightedge, rule or staked lines.
• Set vertical and horizontal structure alignment using plumb bob, gauge line and level.
• Removed excess mortar and finished joints for uniform surface.
• Followed blueprints or drawings to lay blocks and bricks in correct arrangement.
• Prepared surfaces for work by smoothing imperfections on ground or with close structures.
• Performed basic masonry tasks such as tuckpointing, caulking, grinding and other required duties.
• Skilled at working independently and collaboratively in a team environment.
• Self-motivated, with a strong sense of personal responsibility.
• Proven ability to learn quickly and adapt to new situations.
• Worked well in a team setting, providing support and guidance.
• Mixed mortar, plaster and grout, manually or using machines according to standard formulas.
• Arranged or stored machines, tools and equipment.
• Applied caulk, sealants or other agents to installed surfaces.
• Helped complete skilled work by coordinating needed supplies and equipment based on specific job requirements.
• Set up and removed support structures such as folding ladders and scaffolding.
• Assisted with installation, repair and rebuilding of stone and Tile, structures.
• Readied surfaces for smooth installations by removing damaged materials and correcting minor imperfections.
• Finalized installations with sealing agents and smooth lines of caulk.
• Read and understood project specifications to properly prepare grout, cleaning solutions and other mixtures.
• Worked effectively in fast-paced environments.
• Managed time efficiently in order to complete all tasks within deadlines.
• Worked flexible hours across night, weekend and holiday shifts.
• Prepared granite by filling in chips or cracks and polishing surfaces.
• Operated equipment and tools to move, cut and seal granite slabs for kitchens and baths.
• Cleaned, organized and prepared work areas for new installations.
• Followed company standards and code requirements for all jobs.
• Cut and prepared tiles for installation following precise measurements and job specifications.
• Worked professionally with other tradespeople on successful, on-time project completion.
• Followed industry standards and regulations for different types of tile installation projects.
• Maintained safe, clean and organized work environment.
• Learned about various tile types, sizes and installation techniques and stayed current on industry changes.
• Used specialized tools and equipment to cut, shape and install tile.
• Resolved problems arising during tile installation process, maintaining quality and code compliance.
• Completed skilled repairs of existing tile installations.
• Helped supervisors create cost estimates for tile installation projects.
• Created watertight finish on tiles by sealing surfaces and adding grout.
• Inspected floors before, during and after tile installation and reported identified concerns.
• Documented tile materials and supplies used in each project for proper recordkeeping and billing.
• Used power wet saws and tile cutters to cut tiles to specifications for projects.
• Operated machines to mix mortar, thinset and grout according to standard formulas.
• Placed marble and tiles into place using spacers to achieve proper spacing for grout application.
• Completed accurate, well-aligned and straight work according to job specifications.
• Used safe lifting, equipment and behavioral practices.
• Determined and implemented best layout to achieve desired pattern.
• Leveraged power saws or tile cutters to cut materials to specified sizes for installation.
• Applied protective materials to reduce damage, dust and debris.
• Inspected tiled areas to evaluate repairs needed and submit labor, material and supply estimates.
• Used schematic diagrams to plan work.
• Planned and handled more than 10 installation jobs each month.
• Sealed joints with mortar or cement to achieve design looks and promote longevity.
• Incorporated site blueprints and customer preferences to plan work and achieve desired patterns.
• Reviewed blueprints and specifications to determine labor and materials that would be required to complete tiling project.
• Updated logs and completed timely job paperwork.
• Created stonework designs by following sketches to cut stone into target shapes.
• Smoothed uneven surfaces using sanding equipment to produce high-quality finished products.
• Used personal protective gear to eliminate exposure to harmful dust, fumes and materials.
• Maintained and applied knowledge of stone types, internal structure and natural chip patterns to minimize waste.
• Dressed stone surfaces using bushhammers.
• Followed general safety measures and used tools and machinery properly to avoid mishaps.
• Installed tile flooring in residential homes and commercial buildings.
• Delivered excellent customer services, promptly addressing concerns and questions.
• Followed strict safety standards for customer and worker protection.

. Quality control Inspector, overseeing, the Quality of all Marble, Granite, Tile and Waterproofing, Installations.

• Communicated with production team members about quality issues.
• Inspected quality of products, taking note of functionality, appearance and other specifications.
• Performed visual inspections and non-destructive tests where appropriate.
• Inspected incoming and outgoing materials for accuracy and quality.
• Collaborated with production staff to establish and meet quality standards of stone and tile products
• Reported repeated issues to supervisors and other departments, collaborating to identify issue roots and rectify problems.
• Completed precise measurements using special tools.
• Identified and documented quality discrepancies for management to develop resolutions.
• Evaluated components and final products against quality standards and manufacturing specifications.
• Participated in team meetings to discuss progress and results, providing ideas and suggestions for improvement.
• Performed root cause analysis to identify and resolve defects, improving quality standards.
• Developed and implemented inspection processes to define criteria and quality control measures.
• Monitored inventory levels to restock materials and maintain consistent supply.
• Resolved customer complaints by investigating problems and developing solutions.
• Examined products for imperfections and defects.
• Recorded inspection and test results on data sheets.
• Updated quality control records and reports.
• Checked color, shape, texture and grade of Stone and Tile products and materials against established templates, charts, and samples.
• Monitored product quality at all stages of production process.
• Followed standard operating procedures for inspections and tests.
• Trained other workers in inspection and testing procedures.
• Provided feedback to production team regarding product quality.
• Followed safety protocols while handling hazardous materials.
• Sampled products to verify compliance with standards
• Operated and maintained testing equipment.
• Utilized quality control software to track and analyze product data.
• Assisted in developing inspection and testing protocols.
• Repaired faults, reassembled products, and completed additional tests.
• Provided technical support to production personnel.
• Weighed products prior to shipment to confirm accuracy.
• Used analyzers, multimeters and power supplies to conduct diagnostic procedures.
• Coordinated with systems partners to finalize designs and confirm requirements.
• Recommended architectural improvements, design solutions, and integration solutions.
• Set up and performed live water tests, to waterproofing installations, to facilitate, the prevention of failed waterproofing.

• Organized work to meet demanding production goals.
• Performed troubleshooting and diagnosis on malfunctioning equipment.
• Maintained quality assurance and customer satisfaction objectives.
• Inspected equipment to identify areas of wear or causes of malfunctions.
• Applied critical thinking and research to address complex issues.
• Addressed routine equipment maintenance according to established schedule.
• Completed job reports and logs immediately following service calls.
• Performed complex mechanical alignments and equipment calibration to meet quality standards.
• Participated in team projects, demonstrating an ability to work collaboratively and effectively.
• Worked flexible hours across night, weekend and holiday shifts.
• Paid attention to detail while completing assignments.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Adaptable and proficient in learning new concepts quickly and efficiently.
• Skilled at working independently and collaboratively in a team environment.
• Installed tile flooring in residential homes and commercial buildings.
• Cut and prepared tiles for installation following precise measurements and job specifications.
• Used specialized tools and equipment to cut, shape and install tile.
• Worked professionally with other tradespeople on successful, on-time project completion.
• Completed skilled repairs of existing tile installations.
• Created watertight finish on tiles by sealing surfaces and adding grout.
• Learned about various tile types, sizes and installation techniques and stayed current on industry changes.
• Resolved problems arising during tile installation process, maintaining quality and code compliance.
• Documented tile materials and supplies used in each project for proper recordkeeping and billing.
• Inspected floors before, during and after tile installation and reported identified concerns.
• Followed industry standards and regulations for different types of tile installation projects.
• Helped supervisors create cost estimates for tile installation projects.
• Used power wet saws and tile cutters to cut tiles to specifications for projects.
• Completed accurate, well-aligned and straight work according to job specifications.
• Prepared for new installations and repair work by removing original materials and debris.
• Inspected tiled areas to evaluate repairs needed and submit labor, material and supply estimates.
• Leveraged power saws or tile cutters to cut materials to specified sizes for installation.
• Used safe lifting, equipment and behavioral practices.
• Determined and implemented best layout to achieve desired pattern.
• Operated machines to mix mortar, thinset and grout according to standard formulas.
• Placed marble and tiles into place using spacers to achieve proper spacing for grout application.
• Sealed joints with mortar or cement to achieve design looks and promote longevity.
• Leveled surfaces using plywood and mortar prior to laying marble and tile.
• Applied protective materials to reduce damage, dust and debris.
• Incorporated site blueprints and customer preferences to plan work and achieve desired patterns.
• Planned and handled more than 12 installation jobs each month.
• Achieved smooth surfaces with correct cuts and skills in polishing materials.
• Used schematic diagrams to plan work.
• Reviewed blueprints and specifications to determine labor and materials that would be required to complete tiling project.
• Updated logs and completed timely job paperwork.
• Applied caulk, sealants or other agents to installed surfaces.
• Set up and removed support structures such as folding ladders and scaffolding.
• Assisted with installation, repair and rebuilding of stone structures.
• Readied surfaces for smooth installations by removing damaged materials and correcting minor imperfections.
• Finalized installations with sealing agents and smooth lines of caulk.
• Used personal protective gear to eliminate exposure to harmful dust, fumes and materials.
• Maintained and applied knowledge of stone types, internal structure and natural chip patterns to minimize waste.
• Dressed stone surfaces using bushhammers.
• Operated equipment and tools to move, cut and seal granite slabs for kitchens and baths.
• Measured, cut and smoothed stone to maximize fit and complete attractive work for customers.
• Maximized project efficiency by building and installing prefabricated masonry units.
• Organized patterns, plans and supplies to efficiently prepare for each job.
• Operated equipment such as cranes and hoists to lift and guide large stones into place.
• Operated drills, paving breakers, and powered abrasive saws to cut or demolish bricks and concrete.
• Read work orders and design drawings to determine work requirements and sequence of tasks.
• Used polishing and surfacing machines to polish surfaces.
• Installed anchor bolts, steel plates and door sills in freshly poured concrete to provide decorative finish.
• Operated equipment such as forklifts to move bricks and supplies.
• Applied colored marble or stone chips, and powdered steel over surfaces to produce prescribed finishes.
• Shaped, trimmed and cut marble or stone preparatory using power saws and hand tools.
• Laid out wall patterns or foundations using straightedge, rule or staked lines.
• Set vertical and horizontal structure alignment using plumb bob, gauge line and level.

• Measured, cut and smoothed stone to maximize fit and complete attractive work for customers.
• Cleaned off excess materials and polished surfaces to achieve ideal smoothness and reflectivity.
• Maximized project efficiency by building and installing prefabricated masonry units.
• Organized patterns, plans and supplies to efficiently prepare for each job.
• Operated equipment such as cranes and hoists to lift and guide large stones into place.
• Operated drills, paving breakers, and powered abrasive saws to cut or demolish bricks and concrete.
• Read work orders and design drawings to determine work requirements and sequence of tasks.
• Used polishing and surfacing machines to polish surfaces.
• Installed anchor bolts, steel plates and door sills in freshly poured concrete to provide decorative finish.
• Operated equipment such as forklifts to move bricks and supplies.
• Shaped, trimmed and cut marble or stone preparatory using power saws and hand tools.
• Laid out wall patterns or foundations using straightedge, rule or staked lines.
• Set vertical and horizontal structure alignment using plumb bob, gauge line and level.
• Prepared granite by filling in chips or cracks and polishing surfaces.
• Operated equipment and tools to move, cut and seal granite slabs for kitchens and baths.
• Used personal protective gear to eliminate exposure to harmful dust, fumes and materials.
• Dressed stone surfaces using bushhammers.
• Applied colored marble or stone chips, and powdered steel over surfaces to produce prescribed finishes.
• Skilled at working independently and collaboratively in a team environment.
• Self-motivated, with a strong sense of personal responsibility.
• Used power wet saws and tile cutters to cut tiles to specifications for projects.
• Prepared for new installations and repair work by removing original materials and debris.
• Operated machines to mix mortar, thinset and grout according to standard formulas.
• Placed marble and tiles into place using spacers to achieve proper spacing for grout application.
• Used safe lifting, equipment and behavioral practices.
• Completed accurate, well-aligned and straight work according to job specifications.
• Achieved smooth surfaces with correct cuts and skills in polishing materials.
• Inspected tiled areas to evaluate repairs needed and submit labor, material and supply estimates.
• Incorporated site blueprints and customer preferences to plan work and achieve desired patterns.
• Reviewed blueprints and specifications to determine labor and materials that would be required to complete tiling project.
• Installed tile flooring in residential homes and commercial buildings.
• Cut and prepared tiles for installation following precise measurements and job specifications.
• Used specialized tools and equipment to cut, shape and install tile.
• Completed skilled repairs of existing tile installations.
• Created watertight finish on tiles by sealing surfaces and adding grout.
• Learned about various tile types, sizes and installation techniques and stayed current on industry changes.
• Resolved problems arising during tile installation process, maintaining quality and code compliance.
• Documented tile materials and supplies used in each project for proper recordkeeping and billing.
• Inspected floors before, during and after tile installation and reported identified concerns.
• Helped supervisors create cost estimates for tile installation projects.
• Followed industry standards and regulations for different types of tile installation projects.
• Leveraged power saws or tile cutters to cut materials to specified sizes for installation.
• Determined and implemented best layout to achieve desired pattern.
• Updated logs and completed timely job paperwork.

• Assisted in scheduling inspections for job sites and projects.
• Maintained safety onsite and upheld all OSHA regulations.
• Supervised staff by checking work against project expectations.
• Reviewed plans and inspected ongoing construction to keep work in line with project goals.
• Communicated and documented expectations to subcontractors during weekly meetings.
• Instructed personnel on use and maintenance of equipment and immediately notified supervisor of needed repairs.
• Delivered outstanding service to customers to maintain and extend relationships for future business opportunities.
• Supported project coordination and smooth workflow by coordinating materials, inspections, and contractor actions.
• Remained aware of project costs and notified project team of anticipated exceptions to estimates.
• Performed regular job site observations to provide direction for general contractor personnel and subcontractor laborers.
• Monitored construction sites for compliance with safety regulations and adherence to standards.
• Established and maintained relationships with vendors to source affordable and high quality materials and equipment for construction projects.
• Tracked project costs and other financial metrics to maximize profitability.
• Developed and implemented construction plans according to client specifications and expectations.
• Assisted in organizing and overseeing assignments to drive operational excellence.
• Coordinated with site personnel, clients and local government officials to achieve on-time project delivery.
• Led weekly production and operations contractor meetings, facilitating stronger communication, and helping to resolve critical issues.
• Conducted critical pre-installation conferences with general contractors, subcontractors, consultants, and manufacturer's representatives.
• Collaborated with structural engineers to evaluate structural integrity of projects.
• Scheduled subcontractors, consultants and vendors to coordinate completion of jobs and tasks.
• Supervised field crews to maximize quality and work efficiency.
• Coordinated required inspections with local jurisdictions to identify and quickly resolve any code concerns.
• Identified and reviewed proposed change order requests.
• Delivered reports to construction manager to detail project updates and likely completion dates, noting delays and causes.
• Collaborated with management and fellow supervisors to organize operations and achieve demanding schedule targets.
• Delegated assignments based on plans, project needs, and knowledge of individual team members.
• Supervised material usage and contractor man-hours to keep projects in line with budgetary restrictions.
• Identified and eliminated safety risks through additional training.
• Asserted control over material usage and contractor man-hours to keep projects in line with budgetary restrictions.
• Stayed up to date on OSHA and local safety guidelines for Stone and scaffolding work, and correctly reported incidents to supervisors.
• Completed accurate material and labor estimates for jobs ranging from small to large budgets.

• Inspected completed work to verify quality standards and compliance with criteria.
• Trained new employees to learn new marble, granite and stone settingsystems, apply best practices and comply with protocols and regulations.
• Handled issues with relative ease by implementing best practices and applying critical thinking skills to find best solutions.
• Checked equipment to determine if maintenance was required.
• Reviewed project details to specify correct materials and equipment for job sites.
• Interacted with employees to demonstrate high standards and mitigate issues effectively.
• Established clear priorities and production quality standards.
• Verified completed projects met approved time, quality, and cost estimates.
• Monitored usage of supplies and materials to establish cost effective operations.
• Scheduled job assignments for staff to monitor progress and performance.
• Evaluated incoming materials for quality and amounts ordered.
• Addressed issues with employees and customers to manage healthy conflict resolutions.
• Conducted monthly meetings with employees to discuss safety issues, status and development.
• Reworked positions and workflow based on individual abilities and production targets.
• Developed and implemented new procedures to increase productivity and constructiveness.
• Oversaw daily operations at site, keeping team production moving at optimal pace.
• Trained workers in proper methods, equipment operation and safety procedures.
• Inspected equipment and tools used for safe operation.
• Monitored job progress and performance of employees or contractors to complete projects prior to deadlines.
• Directed projects according to schedule and quality demands.
• Prepared and submitted reports on job progress and safety conditions to upper management.
• Provided feedback to workers on job performance and safety procedures.
• Created and implemented plans to maximize efficiency of workers.
• Developed and maintained positive relationships with clients and other stakeholders.
• Established and enforced safety regulations, procedures and standards for construction and extraction workers.
• Supervised field crews to maximize quality and work efficiency.
• Inspected work for compliance with applicable regulations and job specifications.
• Studied and interpreted blueprints to plan construction phases and team assignments.
• Analyzed project blueprints and specifications to identify exact number of laborers needed to complete job.
• Delivered reports to construction manager to detail project updates and likely completion dates, noting delays and causes.
• Verified and submitted team timesheets.
• Identified and eliminated safety risks through additional training.
• Evaluated team member strengths and assigned tasks based upon expertise and background.
• Collaborated with management and fellow supervisors to organize operations and achieve demanding schedule targets.
• Constructed High Rise,buildings with stone exterior

verniers and marble interiors.

• Investigated and reported on accidents, injuries and near-miss incidents.
• Communicated with stakeholders on job milestones.

• Measured, cut and smoothed stone to maximize fit and complete attractive work for customers.
• Cleaned off excess materials and polished surfaces to achieve ideal smoothness and reflectivity.
• Organized patterns, plans and supplies to efficiently prepare for each job.
• Maximized project efficiency by building and installing prefabricated masonry units.
• Operated equipment such as cranes and hoists to lift and guide large stones into place.
• Operated drills, paving breakers, and powered abrasive saws to cut or demolish bricks and concrete.
• Followed blueprints or drawings to lay blocks and bricks in correct arrangement.
• Applied sealants or other protective coatings to waterproof or restore concrete surfaces.
• Operated equipment such as forklifts to move bricks and supplies.
• Prepared surfaces for work by smoothing imperfections on ground or with close structures.
• Installed anchor bolts, steel plates and door sills in freshly poured concrete to provide decorative finish.
• Used polishing and surfacing machines to polish surfaces.
• Applied colored marble or stone chips, and powdered steel over surfaces to produce prescribed finishes.
• Set vertical and horizontal structure alignment using plumb bob, gauge line and level.
• Laid out wall patterns or foundations using straightedge, rule or staked lines.
• Shaped, trimmed and cut marble or stone preparatory using power saws and hand tools.
• Placed marble and tiles into place using spacers to achieve proper spacing for grout application.
• Used power wet saws and tile cutters to cut tiles to specifications for projects.
• Leveled surfaces using plywood and mortar prior to laying marble and tile.
• Used schematic diagrams to plan work.
• Followed general safety measures and used tools and machinery properly to avoid mishaps.
• Used safe lifting, equipment and behavioral practices.
• Reviewed blueprints and specifications to determine labor and materials that would be required to complete tiling project.
• Completed skilled repairs of existing tile installations.
• Installed tile flooring in residential homes and commercial buildings.
• Created watertight finish on tiles by sealing surfaces and adding grout.
• Cut and prepared tiles for installation following precise measurements and job specifications.
• Learned about various tile types, sizes and installation techniques and stayed current on industry changes.
• Documented tile materials and supplies used in each project for proper recordkeeping and billing.
• Inspected floors before, during and after tile installation and reported identified concerns.
• Prepared for new installations and repair work by removing original materials and debris.
• Maintained and applied knowledge of stone types, internal structure and natural chip patterns to minimize waste.
• Prepared granite by filling in chips or cracks and polishing surfaces.
• Operated equipment and tools to move, cut and seal granite slabs for kitchens and baths.
• Used specialized tools and equipment to cut, shape and install tile.
• Resolved problems arising during tile installation process, maintaining quality and code compliance.
• Operated machines to mix mortar, thinset and grout according to standard formulas.
• Completed accurate, well-aligned and straight work according to job specifications.
• Determined and implemented best layout to achieve desired pattern.
• Leveraged power saws or tile cutters to cut materials to specified sizes for installation.
• Achieved smooth surfaces with correct cuts and skills in polishing materials.

• Operated equipment such as forklifts to move bricks and supplies.
• Prepared surfaces for work by smoothing imperfections on ground or with close structures.
• Paid attention to detail while completing assignments.
• Operated tools, equipment, and machinery according to safety standards.
• Installed complete systems at new residential and business construction sites.
• Laid out materials and system components to prepare for installation.
• Inspected installations to check for functionality and maintain customer satisfaction.
• Communicated quickly and accurately with supervisors about problematic sites, missed installations or other issues.
• Prepared granite by filling in chips or cracks and polishing surfaces.
• Operated equipment and tools to move, cut and seal granite slabs for kitchens and baths.
• Followed company standards and code requirements for all jobs.
• Cut and prepared tiles for installation following precise measurements and job specifications.
• Completed skilled repairs of existing tile installations.
• Created watertight finish on tiles by sealing surfaces and adding grout.
• Installed tile flooring in residential homes and commercial buildings.
• Operated machines to mix mortar, thinset and grout according to standard formulas.
• Placed marble and tiles into place using spacers to achieve proper spacing for grout application.
• Achieved smooth surfaces with correct cuts and skills in polishing materials.
• Sealed joints with mortar or cement to achieve design looks and promote longevity.
• Assessed job information, technical drawings and requirements to deliver carvings meeting depth and dimension specifications.
• Measured, cut and smoothed stone to maximize fit and complete attractive work for customers.
• Operated equipment such as cranes and hoists to lift and guide large stones into place.
• Used polishing and surfacing machines to polish surfaces.
• Installed anchor bolts, steel plates and door sills in freshly poured concrete to provide decorative finish.
• Applied hardening and sealing compounds to cure surface of concrete and waterproof or restore surfaces.
• Applied colored marble or stone chips, and powdered steel over surfaces to produce prescribed finishes.
• Shaped, trimmed and cut marble or stone preparatory using power saws and hand tools.
• Laid out wall patterns or foundations using straightedge, rule or staked lines.
• Set vertical and horizontal structure alignment using plumb bob, gauge line and level.

• Measured, cut and smoothed stone to maximize fit and complete attractive work for customers.
• Cleaned off excess materials and polished surfaces to achieve ideal smoothness and reflectivity.
• Organized patterns, plans and supplies to efficiently prepare for each job.
• Maximized project efficiency by building and installing prefabricated masonry units.
• Operated drills, paving breakers, and powered abrasive saws to cut or demolish bricks and concrete.
• Followed blueprints or drawings to lay blocks and bricks in correct arrangement.
• Applied sealants or other protective coatings to waterproof or restore concrete surfaces.
• Operated equipment such as forklifts to move bricks and supplies.
• Prepared surfaces for work by smoothing imperfections on ground or with close structures.
• Installed anchor bolts, steel plates and door sills in freshly poured concrete to provide decorative finish.
• Applied colored marble or stone chips, and powdered steel over surfaces to produce prescribed finishes.
• Laid out wall patterns or foundations using straightedge, rule or staked lines.
• Shaped, trimmed and cut marble or stone preparatory using power saws and hand tools.
• Set, Marble and Granite Pavers and walls.
• Smoothed uneven surfaces using sanding equipment to produce high-quality finished products.
• Worked well in a team setting, providing support and guidance.
• Worked effectively in fast-paced environments.
• Paid attention to detail while completing assignments.
• Placed marble and tiles into place using spacers to achieve proper spacing for grout application.
• Used power wet saws and tile cutters to cut tiles to specifications for projects.
• Reviewed blueprints and specifications to determine labor and materials that would be required to complete tiling project.
• Completed skilled repairs of existing tile installations.
• Installed tile flooring in residential homes and commercial buildings.
• Created watertight finish on tiles by sealing surfaces and adding grout.
• Cut and prepared tiles for installation following precise measurements and job specifications.
• Inspected floors before, during and after tile installation and reported identified concerns.
• Followed industry standards and regulations for different types of tile installation projects.
• Operated machines to mix mortar, thinset and grout according to standard formulas.
• Completed accurate, well-aligned and straight work according to job specifications.
• Leveraged power saws or tile cutters to cut materials to specified sizes for installation.

• Measured, cut and smoothed stone to maximize fit and complete attractive work for customers.
• Cleaned off excess materials and polished surfaces to achieve ideal smoothness and reflectivity.
• Operated equipment such as cranes and hoists to lift and guide large stones into place.
• Operated drills, paving breakers, and powered abrasive saws to cut or demolish bricks and concrete.
• Followed blueprints or drawings to lay blocks and bricks in correct arrangement.
• Used polishing and surfacing machines to polish surfaces.
• Installed anchor bolts, steel plates and door sills in freshly poured concrete to provide decorative finish.
• Maximized project efficiency by building and installing prefabricated masonry units.
• Applied colored marble or stone chips, and powdered steel over surfaces to produce prescribed finishes.
• Shaped, trimmed and cut marble or stone preparatory using power saws and hand tools.
• Placed marble and tiles into place using spacers to achieve proper spacing for grout application.
• Used power wet saws and tile cutters to cut tiles to specifications for projects.
• Used schematic diagrams to plan work.
• Reviewed blueprints and specifications to determine labor and materials that would be required to complete tiling project.
• Completed skilled repairs of existing tile installations.
• Installed tile flooring in residential homes and commercial buildings.
• Created watertight finish on tiles by sealing surfaces and adding grout.
• Used specialized tools and equipment to cut, shape and install tile.
• Cut and prepared tiles for installation following precise measurements and job specifications.
• Documented tile materials and supplies used in each project for proper recordkeeping and billing.
• Inspected floors before, during and after tile installation and reported identified concerns.
• Leveraged power saws or tile cutters to cut materials to specified sizes for installation.
• Incorporated site blueprints and customer preferences to plan work and achieve desired patterns.
• Maintained and applied knowledge of stone types, internal structure and natural chip patterns to minimize waste.
• worked on crews, setting, precast panels.
• Worked on Crews setting pre constructed granite Truss Panels.
• worked setting, mud bed slab stone pavers.
• Worked, setting stone interior walls and exterior verniers.

• Followed blueprints or drawings to lay blocks and bricks in correct arrangement.
• Operated equipment such as forklifts to move bricks and supplies.
• Installed anchor bolts, steel plates and door sills in freshly poured concrete to provide decorative finish.
• Used polishing and surfacing machines to polish surfaces.
• Applied colored marble or stone chips, and powdered steel over surfaces to produce prescribed finishes.
• Repaired and replaced damaged bricks, blocks and pavers.
• Measured distance from reference points and marked guidelines to lay out work using plumb bobs and levels.
• Operated heavy equipment such as forklifts safely and efficiently to move materials.
• Read and interpreted blueprints, plans, or drawings to correctly lay blocks or bricks according to job or client specifications.
• Prepared surfaces for work by smoothing imperfections on ground or with close structures.
• Applied hardening and sealing compounds to cure surface of concrete and waterproof or restore surfaces.
• Shaped, trimmed and cut marble or stone preparatory using power saws and hand tools.
• Maximized project efficiency by building and installing prefabricated masonry units.
• Installed tile flooring in residential homes and commercial buildings.
• Cut and prepared tiles for installation following precise measurements and job specifications.
• Used power wet saws and tile cutters to cut tiles to specifications for projects.
• Prepared for new installations and repair work by removing original materials and debris.
• Leveraged power saws or tile cutters to cut materials to specified sizes for installation.
• Placed marble and tiles into place using spacers to achieve proper spacing for grout application.
• Used schematic diagrams to plan work.
• Achieved smooth surfaces with correct cuts and skills in polishing materials.
• Worked on crews, setting pre assembled stone panels and exterior stone verniers
• Worked, setting interior mud set slab stone pavers and stone walls.