Ian Keomorokot
Woonsocket,RI
Summary
Dedicated Test and Engineering Technician with over 20 years of professional experience, specializing in supporting engineers and enhancing manufacturing processes on the production floor. Proven expertise in maintaining ISO standards, conducting thermal testing, and performing data reduction analyses, along with hands-on proficiency in PCB assembly, repair, and troubleshooting. Strong commitment to confidentiality while excelling in both independent and collaborative environments. Recognized for taking ownership of tasks and effectively organizing workloads to drive results, with a willingness to relocate anywhere within the US for new opportunities.
Overview
31
31
years of professional experience
Work History
Sr.Manufacturing/Test Technician
Block Engineering
Southborough, MA
10.2021 - Current
- System integration and builder into complete ATP
- Supporting R&D testing and analyzes, report data & docs
- Calibrate laser tuner per specified spectrum
- Sub-ASSY laser products (Optics, laser tuner, PCB, and electro-mechanical)
- Functional test PCB boards or sub-integrating board for LaserTune products
- Supporting engineer based on ECO in testing and modification system boards
- Troubleshooting, repairing, upgrading product instrument based on ECO and RMA request
Test Technician
Block Engineering
Southborough, MA
10.2018 - Current
- Laser alignment (laser tuner, optics ASSY)
- Integration system (LaserWarn), testing, documenting, and ATP
- Supporting engineer team members
- Installing and updating released SW version; FPGA Firmware
- Diagnosed and resolved technical issues in test equipment, enhancing operational efficiency.
- Collaborated with engineering teams to develop and refine testing protocols for new products.
- Conducted thorough testing of optical systems to ensure compliance with quality standards.
Assembly-Technical/Test Technician
IPG Medical Group Photonics
Marlboro, MA
09.2016 - 09.2018
- Assembly medical instrumentation (Biolase/Alta1) for dental, lab, clinical, and hospital uses
- Inspect incoming medical part materials based on ISO 13485 and IPG protocol
- Record and document based on standard operating procedure (SOP)
- Cleaver fiber optics; using micro-stripper; stock
- Thermal calibration, record and plot to non-linear curve for Coefficients
- Test and final evaluation of medical instrumentation for final test protocol
- SW updating for instrumentation based on production revision and latest Released
- Laser calibration for Biolase/Alta1 instrumentation
- Developed and implemented test protocols, improving accuracy in device performance evaluation.
- Collaborated with engineering teams to troubleshoot and resolve technical issues during testing processes.
Supporting Engineer/Lab Manager
Advanced Thermal Solutions Inc.
Norwood, MA
03.2010 - 08.2016
- Lead production in Automation Temperature Velocity Scanning System (ATVS)
- Supporting senior engineer in developing new product
- Build prototypes and testing
- Thermal testing for heat sink and analyze data reduction; documentation; calibration
- Build Wind Tunnel and evaluating the specifications; maintenance lab equipment
- Purchase order of BOM and inventory lists
- Electronic-mechanical assembly
- Rework RMA products
- Updating instrument software per engineer order
Lab Technician Calibration
Advanced Thermal Solutions Inc.
Norwood, MA
08.2008 - 02.2010
- Lead production in Automation Temperature Velocity Scanning System (ATVS)
- Calibrating sensors using Labview software w/ATVS instrument
- Electronic-mechanical assembly ATVS unit and testing
- Thermal testing for heat sink and analyzing data reduction; documentations
- Build Wind Tunnel and evaluating the specifications
- Rework RMA products; maintenance lab equipments
- Test and system integration; Updating SW per released
Tester/Assembler
AirBorn inc
Georgetown, TX
07.2005 - 06.2008
- HI POT testing/ASSY connector cables
- Check and verifying pre-pot and full pot connectors
- Assembly Nano-wiring connector into socket using Microscope
- In-line service for full final cable wiring product
Rework Technician
VForce Staffing Solutions
Corona, CA
03.2003 - 06.2005
- Modified rework cables from the field
- Updating testing module per ECO
- Re-configuration testing module/ installing firmware
- ASSY cables/wiring into sockets and terminal block
Engineering Technician
Sync Research Inc.
Norton, MA
01.2001 - 01.2003
- Performed Frame Relay Access Probe (FRAP) configuration
- Production of FRAP and FRAD; Burn-in final production
- Build FRAP and FRAD control panel units and test and IP protocol configuration
- Purchaser parts from BOM per engineer order; maintenance products inventory
- Rework RMA units; trouble shoot PCB to component level
- Work closely with engineer for ECO revision
Wafer Technician
Cherry Semiconductor Corp.
S County Trial, RI
07.1998 - 12.2000
- Working in the clean room; wafer fabrication, visual inspection, and testing
- Testing wafer mapping to verify functional die to meet product specifications and pick and place wafer
Electronic Technician
Brown & Sharp
East Greenwich, RI
05.1997 - 06.1998
- Perform rework RMA products
- Build control panel units and test for evaluations
- PCB troubleshooting to component level
- Maintenance test fixture, build test fixture
- Inventory
- Burn in products
- Electro-mechanical assembly test fixture
PCB Functional Repair Tech
American Power Conversion
West Kingston, RI
07.1995 - 04.1997
- Perform functional test UPS (un-interrupt power supply)
- Functional test ICT (cell); SMT operator
- Visually inspection PCB board and defected component
- Assistance cell production specialist; assembling UPS unit and burn in process
- Troubleshoot and repair un-interrupt power supply (UPS) products
- Cross training manufacturing floor co-worker
Education
Some College (No Degree) -
University of Rhode Island
Kingston, RIWoonsocket High School
06.1989
Skills
- SMT operator/ICT cell; QA inspecting line assembly
- Computer hardware
- Laboratory experience/Management
- CGMP
- Quality control
- Build prototype; Wiring cable and Striping; knowledge of IPC 610
- Manufacturing processes
- Electro-mechanical and Electrical/Cable ASSY
- Proficient with IBM PC and compatible systems
- Mechanical knowledge
- Integration system testing
- Knowledge of ISO 9000, 9001 and 13485; Instruments calibration
- Using microscope for small parts assembly
- Research & Development supports
- Troubleshooting to component level
- Utilizing blue print, schematics and BOM
- FPGA Firmware, SW installation
- Functional Test and Final Test; Electro-mechanical assembly
- Product thermal testing Analysis
- IPC 610
- Surface mount technology
- Mechanical assembly
- Schematic interpretation
- Electronics troubleshooting/repairs
- Teamwork and collaboration
- Multitasking
- Reliability
- Problem-solving abilities
- Excellent communication
- Organizational skills
- Data collection
- Adaptability and flexibility
- Task prioritization
- Self motivation
- Professionalism
- Time management abilities
- Continuous improvement
- Process improvement
Timeline
Sr.Manufacturing/Test Technician
Block Engineering
10.2021 - Current
Test Technician
Block Engineering
10.2018 - Current
Assembly-Technical/Test Technician
IPG Medical Group Photonics
09.2016 - 09.2018
Supporting Engineer/Lab Manager
Advanced Thermal Solutions Inc.
03.2010 - 08.2016
Lab Technician Calibration
Advanced Thermal Solutions Inc.
08.2008 - 02.2010
Tester/Assembler
AirBorn inc
07.2005 - 06.2008
Rework Technician
VForce Staffing Solutions
03.2003 - 06.2005
Engineering Technician
Sync Research Inc.
01.2001 - 01.2003
Wafer Technician
Cherry Semiconductor Corp.
07.1998 - 12.2000
Electronic Technician
Brown & Sharp
05.1997 - 06.1998
PCB Functional Repair Tech
American Power Conversion
07.1995 - 04.1997
Some College (No Degree) -
University of Rhode Island
Woonsocket High School