Summary
Overview
Work History
Education
Skills
Groups
Additional Information
Awards
Military Service
Personal Information
Timeline
Generic

Isaiah Jones III

Round Rock,United States

Summary

Dynamic Lead Equipment Engineering Technician with extensive experience at Tesla Gigafactory, excelling in equipment repair and calibration. Proven ability to troubleshoot complex systems and enhance manufacturing efficiency. Skilled in electrical schematics and quality assurance, while fostering effective communication across teams to drive continuous improvement.

Overview

26
26
years of professional experience

Work History

Lead Equipment Engineering Technician

Tesla Gigafactory
Austin, TX
06.2024 - Current
  • Assemble manufacturing test equipment including mechanical and electrical assemblies, wire harnesses and PCBAs
  • Read, interpret, build and debug equipment from electrical schematics, wire harness and mechanical drawings
  • Root-causing mechanical, electrical and software faults on test equipment using first principles and communicating effectively when help or more information is needed
  • Perform sustaining maintenance work on equipment and be able to rapidly debug and resolve equipment faults while negating line-down scenarios
  • Work in fast-paced, challenging manufacturing environments to deploy equipment to production lines

Lead Equipment Maintenance Technician / Subject Matter Expert

Tesla Gigafactory
Austin, TX
10.2022 - 06.2024
  • Perform Preventative Maintenance (PM) on all industrial production and mechatronic equipment.
  • Diagnose equipment failures - root cause and communicate required actions across relevant teams.
  • Perform major equipment repairs, rebuilds and installations.
  • Collaborate with Process and Equipment Engineering teams to improve equipment reliability and maintenance protocols.
  • Perform Corrective Maintenance (repairs) on more than one of these types of equipment: Electrical systems ranging from 24 VDC to 480 VAC 3 phase, Mechanical systems, Conveyor Systems, Hydraulics, Pneumatics / Vacuum Systems, PLC and networks (Allen Bradley / Siemens / Beck off), Vision/Inspection Equipment (Keyence / XRAY / Surface inspectors)
  • Order parts, supplies, and equipment from catalogues and suppliers, or obtain them from storerooms.
  • Log all work as performed utilizing Tesla CMMS.
  • Perform other tasks as instructed by management.

Lead Principal Equipment Technician Etch

GlobalFoundries
Malta, NY
08.2021 - 09.2022
  • Monitor, control, and qualify 300mm semiconductor equipment
  • Perform basic preventive maintenance activities
  • React to error messages of factory systems and/or equipment
  • Process wafers using defined procedures
  • Perform visual inspections (quality check)
  • Recover from process and tool interruptions
  • Identify and address potential areas for improvement and optimize tool availability, cycle time, utilization and cost
  • Complete all required reporting and documentation
  • Understand and follow all health, safety, and environmental procedures and requirements
  • Actively participate in continuous improvement processes, learning and skills development
  • Strong team member, able to work well with a global team, and other duties as assigned
  • Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Lead Senior Engineering Technician

Samsung Austin Semiconductor
Austin, TX
03.2015 - 07.2021
  • Implement/initiate work stream processes for data collection and analysis.
  • Use appropriate methods, including SPC, to analyze, maintain, continuously improve and control equipment and processes.
  • Provide leadership in continuous improvement processes and natural work group teams, assisting equally in areas of responsibility.
  • Communicates effectively within and between shifts, modules, and departments.
  • Locate and diagnose complex equipment or process failures, and ensures timely corrective actions.
  • Analyze equipment, process and test systems to ensure that product which is processed and/or tested will meet performance requirements.
  • Conduct complex experimental tests dealing with equipment or processes.
  • Participate in the selection, acceptance, start up and release of new wafer fab/test equipment including installation of equipment hardware or initial process/tool characterization.
  • Analyze and apply operating data to optimize equipment performance consistent with manufacturing objectives.
  • Disposition and provide documentation of production or engineering materials in accordance with specifications.
  • Perform other duties as required.
  • Identify, develop and deliver equipment and/or process training.
  • Coordinate the development of process and equipment specifications, troubleshooting guides, and other fab procedures.
  • Collects, summarizes, interprets and documents productivity data

Senior Engineer Technician

NSTAR Global Services
Austin, TX
07.2014 - 03.2015
  • Provide technical support in the form of troubleshooting, diagnostics, adjustments, repair, modifications, assembly and calibration of equipment according to specifications, blueprints, manuals or written instructions.
  • Utilize a structured and comprehensive method to identify the root cause of process or equipment malfunctions; implements corrective action after thorough analysis to increase the probability of the right fix the first time.
  • Perform electrical, mechanical and software troubleshooting for all area equipment. This includes tools, cables, test fixtures, gas and vacuum systems.
  • Perform chamber cleans and sub-assembly rebuilds following written instructions.
  • Perform periodic preventative maintenance as required and defined by the area specifications.
  • Use a variety of hand tools and diagnostic equipment including torque wrench, helium leak detector, pressure gauge, RF power meter.
  • Maintains accurate logs of work performed, modifications, calibrations and adjustments.
  • Works with minimal supervision

Assembly/Test Technician

WVSG-Ultra Clean Technology
Austin, TX
10.2013 - 07.2014
  • Performs quality assurance testing of incoming raw materials, intermediates, and finished goods.
  • Reports to the QA Analytical Supervisor.
  • Perform periodic calibration of test equipment or gauges and testing for special projects as requested.
  • Assists in problem solving exercises while maintaining quality system standards, requirements, and policies within scope of the job role.

Manufacturing Operator

GCA Services - Freescale Semiconductor
Austin, TX
04.2013 - 10.2013
  • Control and operate computerized wafer equipment, test probe or assembly equipment for the inspection.
  • Also read and understand job specifications, schematics, shop orders and operating instructions.
  • Perform basic math calculations and identify basic functional problems, take corrective action, and interface with supervisors and engineers to explain problems.

Electronic Technician

Schlumberger Oilfield Service Company
San Antonio, TX
08.2010 - 02.2013
  • Adjusts defective components, using hand tools and technical documents
  • Advises management regarding customer satisfaction, product performance, and suggestions for product improvements
  • Analyzes technical requirements of customer desiring to utilize electronic equipment, and performs installation and maintenance duties
  • Calibrates testing instruments and installed or repaired equipment to prescribed specification
  • Inspects components of equipment for defects, such as loose connections and frayed wire, and for accuracy of assembly and installation
  • Operates equipment to demonstrate use of equipment and to analyze malfunctions
  • Tests faulty equipment, using test equipment and applying knowledge of functional operation of electronic unit and systems, to diagnose malfunction
  • Utilize outstanding leadership in rendering technical and maintenance support to Schlumberger field teams to provide efficient and effective quality services to clients.
  • Demonstrate exemplary performance in maintaining, troubleshooting, and repairing all electronic, electric, and computer-based equipment in agreement with local and Schlumberger safety standards and guidelines.
  • Leverage skills in performing primary maintenance duties, which include wireless communications devices within a Controller Area Network bus (CAN bus) interface and very-small-aperture terminal (VSAT) satellite communications.
  • Execute tasks in configuring and programming distributed control units (D Cus), troubleshooting process flow meters, 4-20mA sensors, frequency sensors, and radioactive and non-radioactive densitometers; oversee the setup and repair of network and various data cables, along with facilitating training and mentorship to newly hire employees.

Premise Technician

AT&T Telecommunications
Austin, TX
01.2008 - 10.2009
  • Worked both inside and outside and are responsible for the installation and customer care of U-verse integrated digital TV, high speed Internet and voice services.
  • Educate customers on service features and functionality
  • Verify all services are working correctly
  • Install and rearrange inside and outside wires
  • Worked in small confined spaces or aloft (up to 28ft)
  • Work with hand tools (strippers, crimpers, meters, and toners)
  • Worked outdoors in all kinds of weather

Lead Equipment Engineer Technician / Non-Conformances Manager

Applied Materials
Austin, TX
06.1999 - 11.2006
  • Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
  • Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
  • Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
  • Details finished work, receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defect and troubleshoots and improves processes.

Education

Vocational - Plasma Etch Process

Texas A&M
Sherman, TX
12.1995

Microelectronic Engineering - Semiconductor Technology

Integrated Semiconductor School
Richardson, TX
12.1991

Skills

  • Electrical Experience
  • Precision Measuring Instruments
  • Low Voltage
  • Calipers
  • Manufacturing
  • Equipment Repair
  • Calibration
  • Schematics
  • Hydraulics
  • Sensors
  • Quality Assurance
  • Mechanical Knowledge
  • Computer Operation
  • Programmable Logic Controllers
  • Analysis Skills
  • Troubleshooting

Groups

  • Vice President, The National Bowling Association-Austin Senate, 09/01/24, Present, The National Bowling Association, Inc. is a non-profit corporation organized in August 1939, in Detroit, Michigan, for the express purpose of encouraging Blacks to develop their skills in the game of Ten Pins. It was originally known as the 'National Negro Bowling Association'; because at the time of its birth, Blacks and other Non-Caucasians were not permitted to belong to ABC or WIBC; due to certain restrictive clauses in their constitutions. Since our membership included a large number of Asians, Hispanics, Native Americans and people of color other than Black; in 1944 our organization was renamed, 'The National Bowling Association, Inc.' We actively participated in the fight for 'Equality in Bowling'; and in 1950, both ABC and WIBC removed the Non-Caucasian clauses from their constitutions. Since 1951, TNBA members have enjoyed the privilege of competing in all open sanctioned leagues and tournaments.
  • President, Civitan Austin Action Club, 06/01/13, 06/01/16, Civitan International is an organization of volunteer service clubs around the world, dedicated to helping people in their own communities. Civitan help wherever the need arises - from collecting food for a homeless shelter, to volunteering at their local retirement home, to building a playground for children with disabilities.

Additional Information

7 years working on Applied Materials Etch (200mm/300mm), 29 years experience in equipment maintenance technician, Performance awards for leadership and team building, Proficient in Windows software, Able to make difficult decisions in stressful situations, Engineer/ Maintenance Technician, Adjusts defective components, using hand tools and technical documents, Advises management regarding customer satisfaction, product performance, and suggestions for product improvements, Analyzes technical requirements of customer desiring to utilize electronic equipment, and performs installation and maintenance duties, Calibrates testing instruments and installed or repaired equipment to prescribed specification, Inspects components of equipment for defects, such as loose connections and frayed wire, and for accuracy of assembly and installation, Operates equipment to demonstrate use of equipment and to analyze malfunctions, Tests faulty equipment, using test equipment and applying knowledge of functional operation of electronic unit and systems, to diagnose malfunction, Utilize outstanding leadership in rendering technical and maintenance support to Schlumberger field teams to provide efficient and effective quality services to clients., Demonstrate exemplary performance in maintaining, troubleshooting, and repairing all electronic, electric, and computer-based equipment in agreement with local and Schlumberger safety standards and guidelines., Leverage skills in performing primary maintenance duties, which include wireless communications devices within a Controller Area Network bus (CAN bus) interface and Very-Small-Aperture-Terminal (VSAT) satellite communications., Execute tasks in configuring and programming distributed control units (DCUs), troubleshooting process flow meters, 4-20mA sensors, frequency sensors, and radioactive and non-radioactive densitometers; oversee the setup and repair of network and various data cables, along with facilitating training and mentorship to newly hire employees., Committed to Customer Service satisfaction, Reliable, detail oriented team player, Professional integrity, strong moral, courage and honesty, Proven skill in persevering to solve customers' problems., Self-motivated and confident in making independent decisions., Very well organized and able to meet deadlines

Awards

  • Recognize a peer-SPARC Recognition, 12/01/23, Efficient, Mr. Jones is a great asset to any team. Hard working, laser focused, and dependable for just about thing you might need help with. It's hard to find work ethics as rare as Isaiah's these days. He is a core member of the team and able to take on multiple roles when called upon. A quality technician that I enjoy working with very much.
  • Recognize a peer-SPARC Recognition, 10/01/23, Dependable, From the day that I walked in the door, Mr. Jones has been a support, a mentor, a friend, and a beacon example for others to follow. Isaiah is a man that talks and people listen because his experience and wisdom are seen by everybody. He is like the 'Uncle' on D-Shift. Isaiah frequently walks the floor to check on his teammates to lend a hand or advice when he has an open opportunity. Even when we fix our problems quickly, we know that support is around the corner!
  • Recognize a peer-SPARC Recognition, 09/01/23, Leads With Purpose, Isaiah is a great mentor and is always willing to help and direct his peers and guide lower level technicians towards improving and becoming better technicians.
  • Recognize a peer-SPARC Recognition, 09/01/23, Collaborative, Can always count on Isaiah to check up on me and see if I have everything I need or if I need a hand with anything.
  • Recognize a peer-SPARC Recognition, 09/01/23, Dependable, Isaiah is the definition of dependable and trustworthy. The whole crew respects and trusts him to lead and accomplish any goal.
  • Recognize a peer-SPARC Recognition, 09/01/23, Efficient, Isaiah, along with another team member worked tirelessly to improve their tools availability by over 20% during the shift (12hrs).
  • Recognize a peer-SPARC Recognition, 07/01/23, Driven, Takes great ownership for E-Fill toolset and projects. Motivated to complete task no matter the time limit for completion. Speak up and demands top performance from teammates in a respectable manner.
  • Recognize a peer-SPARC Recognition, 07/01/23, Leads With Purpose, Mr. Jones has really turned the structure up a notch! He is a working team lead who is on the floor still performing his duties as the SME on his designated project. It is really incredible. He pulls a full 12 hours working on the E-Fill project and then he does the administrative aspects of the job to perform pass-downs in an efficient, and professional way. Everyone respects the way that Mr. Jones has stepped up and aided in building morale for the entire D shift. We are proud and anxious to see what's next!
  • Recognize a peer-SPARC Recognition, 06/01/23, Leads With Purpose, When I first met Mr. Jones, I knew he had a strong personality. What I failed to realize was how purposeful that personality represented a hardworking Tech. In previous weeks, our Commander and Chief was out on leave and Mr. Jones stepped up to the plate to lead and guide the team to successful pass downs and smooth communication. Mr. Timmons (supervisor) even noted that Mr. Jones is a natural lead.
  • Recognize a peer-SPARC Recognition, 06/01/23, Leads With Purpose, Isaiah, has proven to be a true leader! He has taken ownership of his work on E-Fill equipment and helps others with learning the equipment. He is super dependable, and cares about his colleges. His knowledge and skills as a team leader are superior.
  • Recognize a peer-SPARC Recognition, 06/01/23, Leads With Purpose, Always offering advice to production associates and working hard throughout the week to get the E-Fill machines running in top condition for us to run and also pass to next shift group.
  • Recognize a peer-SPARC Recognition, 05/01/23, Leads With Purpose, Excellent leader! This man leads by example and is always available when we need him.

Military Service

United States Army Reserves, United States, E3, 09/01/06, 04/01/10, Receives and stores bulk and package POL products., Issues and dispenses bulk fuels and water from storage and distribution facilities to using units., Selects and submits samples of POL to laboratory for testing., Performs petroleum and water accounting duties., Operates equipment associated with petroleum and water distribution system and multi-product pipeline system., Fuels and defuels vehicles, aircraft, and stationary equipment., Takes emergency precautions to prevent harm to self and facilities in event of petroleum spillage or fire.

Personal Information

  • Willing To Relocate: Anywhere
  • Authorized To Work: US for any employer

Timeline

Lead Equipment Engineering Technician

Tesla Gigafactory
06.2024 - Current

Lead Equipment Maintenance Technician / Subject Matter Expert

Tesla Gigafactory
10.2022 - 06.2024

Lead Principal Equipment Technician Etch

GlobalFoundries
08.2021 - 09.2022

Lead Senior Engineering Technician

Samsung Austin Semiconductor
03.2015 - 07.2021

Senior Engineer Technician

NSTAR Global Services
07.2014 - 03.2015

Assembly/Test Technician

WVSG-Ultra Clean Technology
10.2013 - 07.2014

Manufacturing Operator

GCA Services - Freescale Semiconductor
04.2013 - 10.2013

Electronic Technician

Schlumberger Oilfield Service Company
08.2010 - 02.2013

Premise Technician

AT&T Telecommunications
01.2008 - 10.2009

Lead Equipment Engineer Technician / Non-Conformances Manager

Applied Materials
06.1999 - 11.2006

Vocational - Plasma Etch Process

Texas A&M

Microelectronic Engineering - Semiconductor Technology

Integrated Semiconductor School