Ivan Figueroa
Rio Grande City,TX
Summary
Electrical Journeyman experianced in installation of conduit, cable tray, cable tail in, terminations, troubleshooting, load banking, reading one-line diagrams, electrical schematics, P&ID, and performing lockout/tagout shutdowns
Overview
1
1
Certification
8
8
years of professional experience
Work History
Electrical Journeyman
North Star Services Inc
Colorado City, TX
06.2026 - Current
- Troubleshoot wiring issues and faulty components to restore safe operation across active job sites.
- Run conduit, cable tray, and grounding systems to support new electrical builds and upgrades.
- Read wiring diagrams and layout plans to complete installations accurately and maintain project flow.
- Run cables through underground pvc pipes from substaion to data center main power distribution buildings
- Megging/ Phoning cables connecting data halls to UPDUs
- Testing UPS systems
- Load bank testing generators alongside commissioning and clients
- Terminating(High Voltage) UPDU circuit breakers connecting to hacks for power transfer switches
Electrical Journeyman
RUS Industrial
Columbus, OH
05.2024 - 06.2026
- Installed RIO panels, fiber opticecables, conduit, cable tray, and grounding systems according to wiring diagrams and job specifications.
- Performed troubleshooting on electrical circuits, equipment, and controls to restore normal operation.
- Connected high and low voltage systems using proper termination methods and jobsite safety practices.
- Tested electrical components and verified circuit continuity before turning systems back over to operations.
- Read wiring layouts and field drawings to plan accurate installation work and reduce avoidable delays.
- Worked with maintenance teams to diagnose electrical issues and complete repairs in active low and high voltage areas.
- Verified equipment calibration and setup before startup to support reliable operation of electrical systems.
Electrical Journeyman
Absolute Pipeline Integrity
Carlsbad, United States
12.2023 - 04.2024
- Ensured safe work environments by adhering to safety protocols and proper use of personal protective equipment.
- Performed comprehensive inspections on existing wiring systems, identifying potential hazards and recommending corrective actions.
- Skillfully executed complex electrical tasks such as panel installations, circuit upgrades, and transformer replacements.
- Improved overall energy efficiency for clients with the integration of renewable energy sources into their existing electrical systems
- performed installation/terminations and demo work during my time with this company in an efficient time frame with accuracy to satisfy the client's standards.
- performed installation of cable tray and conduit for a multitude of equipment and processing systems such as heat trace for compressor stations that have a tendency to freeze.
- installation of instruments and termination for process pipe to PLC
- installing lights and photo cells for compressor stations and terminating junction box
- removing and replacing damaged solar panels in searcy arkansas
- troubleshooting cables in inverters for breaks in cable to identify which are to be replaced with proper LOTO procedures
- track down damaged cable combiner boxes to figure out the best possible route to take for trenching and hydro vac
- run/terminate cables to restore power to PCS for power production for client
- performed proper de-energizing process by locking out all possible power sources while using a flash suit after that i preceded to check for any voltage with phase to phase and faze to ground to take out and residual energy
- Replaced damaged solar panels and restored related electrical connections at field sites.
- Verified de-energized conditions with proper testing methods before starting energized work.
- Installed lights, photo cells, and junction box terminations for compressor station electrical systems.
Electrical Journeyman
MMR Group
Ingleside, TX
02.2023 - 09.2023
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- During my time on this job site i was tasked with a number of tasker such as repairing old and damaged cable tray with existing cable without damaging cables while working dark and tight work areas and working with welders to install new supports
- Was also tasked with fabbing supports and stands for panels, junction boxes, devices and lighting
- Worked on RIO panels for ESD systems but running cables to panels and glanding to panel
- Installed cables and terminated them for the interior of the rig and exterior, such as for helicopter deck flood and proximity lighting and terminated all light that was worked on, like main cable to all jumpers
- Would be installing fire and gas systems and PA communications by installing gas detectors and smoke detectors and flame detectors all over the rig and making fuel routes for them and terminating devices
- Would be installing and fabbing supports and PA speakers and J Boxes all over the rig at every elevation and running cables and jumpers for circuits and terminating them to sell off to client .
- Was terminating cooling fan motors and running tray for cables
- Would also be tasked with hot jobs in which i would need to LOTO electrical systems to be able to safely work in lighting panel for glanding cables in and terminating
- Would also walk down work with QC/QA for quality checking and making fixes if needed
Electrical Journeyman
S&B Industries
Baytown, TX
11.2022 - 02.2023
- Optimized work readiness with organized tools and spaces.
- Read and interpreted drawings to provide wiring layouts for new installations.
- I was tasked with walking down route for conduit runs i would bend conduit for installation on light fixtures for regular and emergency lighting for Frac unit.
- Working at elevation such as walking on structural beams with proper tie-off procedures to install 4" to 32'' in cable tray horizontal and vertical runs and arming cable tray to be flown up on pipe rack for installation
- Prepared conduit and tray materials for installation to keep field work moving efficiently.
Electrical Journeyman
S&B Industries Inc
Baytown, TX
10.2022 - 11.2022
- Handled installation of electrical components by splicing, joining, and connecting wire.
- during my time on the job i would walk down my work to be done with my General foreman and journeyman to figure out the route for conduit that was to run from and instrument to and ESD's and from junction boxes to PCL panels.
- was also tasked with installing cable tray and cable tray to panels and devices for start stop systems
- also tasked with running cable through conduit and tray and terminating devices.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- i would also work at elevation on scaffolds and man lifts to run cables and tray for high voltage and instruments
Electrical Journeyman
S&B Industries
Deer Park, TX
04.2022 - 07.2022
- Pulling wire and help coordinating path to be taken for wire throughout FRAC unit
- Help coordinate personnel to get wire to destination
- Handled installation of electrical components by splicing, joining and connecting wire
- Repaired light fixtures, controls, switches, relays and circuit breaker panels based on detailed evaluations
- Checked compatibility and safety of newly installed electrical systems and launched inspections and tests to confirm functionality
- Optimized work readiness with organized tools and spaces.
Electrical Apprentice
Zeps Electrical
Pearland, TX
10.2021 - 03.2022
- Repaired light fixtures, controls, switches, relays and circuit breaker panels based on detailed evaluations
- Handled installation of electrical components by splicing, joining and connecting wire
- Checked compatibility and safety of newly installed electrical systems and launched inspections and tests to confirm functionality
- Running cables to MCC to terminate onto electrical panels
- Laying down ground grid and ground wire to structure
- Cutting and installing aluminum cable and pipe from the main power grid to the transformers.
- Installing high voltage cables into panels coming from duct banks that we were tasked with installing and prepping for cables.
Electrical Apprentice
MMR Group
Tx, United States
11.2018 - 01.2021
- Tool management and site safety
- Optimized work readiness with organized tools and spaces
- Ran conduit and wire according to plans and code requirements
- Installed ground cables to MCC, and RIE building and grids
- Repaired light fixtures, controls, switches, relays and circuit breaker panels based on detailed evaluations
- Handled installation of electrical components by splicing, joining and connecting wire
- Terminated wiring and connected circuits with correct techniques
- Trained laborers in basic electrical principles, tool management and site safety
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Electrical Apprentice
CB&I PROJECT SERVICES GROUP, LLC
Lake Charles, LA
08.2018 - 11.2018
- Pulling wire and working at high elevation to get cables to MMC, junction boxes, switch gears, and panels.
- Installed new electrical components and fixtures safely and tested systems to enhance power flow
- Inspected electrical systems, equipment and components to identify hazards and defects
- Optimized work readiness with organized tools and spaces
Education
High School Diploma -
Sebastian River High School
Sebastian, FLSkills
- Terminations of high/low voltage systems
- Running conduit
- Installation of cable tray
- Wiring layouts
- Grounding systems
- AC/DC control circuitry
- Troubleshooting instruments/equipment
- Low Voltage systems
- High Voltage systems
- Equipment calibration
- Safety and compliance
- Load bank testing
- Arc flash safety
- Lockout tagout procedures
- Motor control circuits
- PLC troubleshooting
- UPDU termination and installation
- Process instrumentation
- Loop checking
Certification
Electrician Apprentice
travel
Willing To Relocate: Anywhere
Timeline
Electrical Journeyman
North Star Services Inc
06.2026 - Current
Electrical Journeyman
RUS Industrial
05.2024 - 06.2026
Electrical Journeyman
Absolute Pipeline Integrity
12.2023 - 04.2024
Electrical Journeyman
MMR Group
02.2023 - 09.2023
Electrical Journeyman
S&B Industries
11.2022 - 02.2023
Electrical Journeyman
S&B Industries Inc
10.2022 - 11.2022
Electrical Journeyman
S&B Industries
04.2022 - 07.2022
Electrical Apprentice
Zeps Electrical
10.2021 - 03.2022
Electrical Apprentice
MMR Group
11.2018 - 01.2021
Electrical Apprentice
CB&I PROJECT SERVICES GROUP, LLC
08.2018 - 11.2018
High School Diploma -
Sebastian River High School