Jacek Twardowski

• Installed, maintained, and repaired electrical systems in residential and commercial properties.
• Conducted thorough inspections and troubleshooting to ensure compliance with safety standards.
• Collaborated with contractors to coordinate electrical installations for new construction projects.
• Mentored junior electricians, providing training on best practices and safety protocols.
• Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Led project teams in executing complex electrical installations within tight deadlines.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
• Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
• Performed routine and complex maintenance and repairs on various electrical equipment.
• Stored and maintained power tools and equipment for each job.

• Improved safety standards by routinely inspecting electrical systems.
• Installed and maintained wiring for enhanced building functionality.
• Ensured compliance with regulations through diligent workmanship.
• Repaired faulty equipment, resulting in minimal downtime.
• Carried out testing of electrical systems for optimal performance.
• Diagnosed malfunctions to restore system functionality swiftly.
• Maintained customer satisfaction by providing professional service at all times.
• Read blueprints effectively, ensuring accurate construction projects completion.
• Performed preventative maintenance tasks to reduce potential future issues.
• Used hand and power tools proficiently during repair and installation duties.
• Provided clients with estimates to manage expectations of costs involved in electrical works.
• Responded swiftly to emergency calls outs, reducing potential damage or loss.
• Worked well under pressure during time-sensitive projects ensuring timely completion.
• Collaborated efficiently with other contractors on larger scale assignments.
• Adhered strictly to Health and Safety guidelines reducing risk of accidents onsite.
• Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
• Maintained clean, safe working environments, minimising risk to staff and visitors.
• Performed timely electrical system installation of conduit, wire, power distribution and motor controls.
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
• Ensured safety of electrical work and systems through regular, rigorous testing.
• Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions to deliver to project requirements.
• Completed Electrical Certificates and Electrical Condition Reports for optimal project compliance.
• Maintained and tested fire alarm systems, ensuring faultless electrical function.
• Calculated price quotes and project scopes to inform clients of estimated costs.
• Prepared wiring, fixtures and fittings to exact project requirements.
• Documented completed work to company standards.

• DISNEY WISH CRUISE SHIP. IS THE NEWEST SHIP FROM DISNEY.
• The ship's grand opening will take place at Orlando Florida July 04
• Performed troubleshooting and diagnosis on malfunctioning systems or components.
• Addressed and resolved worksite safety hazards to reduce risk.
• Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
• Reviewed blueprints to determine electrical component and wiring locations.
• Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
• Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
• Dismantled electrical components using hand tools to disconnect and restore wiring connections.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
• Prioritized and organized tasks to efficiently accomplish service goals.
• Juggled multiple projects and tasks to ensure high quality and timely delivery.
• Demonstrated self-reliance by meeting and exceeding workflow needs.
• Provided excellent service and attention to customers when face-to-face or through phone conversations.
• Improved operations by working with team members and customers to find workable solutions.
• Motivated and encouraged team members to communicate more openly and constructively with each other.
• Frequently worked overtime, weekends and holidays.
• Tested and repaired electric motors, variable frequency drives, alarms and control systems.
• Maintained inventory of parts for immediate and emergency repairs.
• Maintained accurate electronic and instrument inventory to support safe and efficient operation.
• Verified equipment certifications and regulatory compliance.
• Collaborated with engineering staff on testing of prototypes and modified instruments.
• Developed quality rapport with electricians and consumers.
• Maintained electrical and mechanical components of gas and diesel engine-driven generators.
• Reviewed line drawings to locate and splice buried fiber optic cables.

• Reviewed blueprints to determine electrical component and wiring locations.
• Dismantled electrical components using hand tools to disconnect and restore wiring connections.
• Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
• Addressed and resolved worksite safety hazards to reduce risk.
• Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
• Performed troubleshooting and diagnosis on malfunctioning systems or components.
• Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
• Achieved cost-savings by developing functional solutions to problems.
• Performed site evaluations, customer surveys and team audits.
• Exceeded customer satisfaction by finding creative solutions to problems.
• replacement of cables sections after fire
  connecting certain sections of cables supplying the ship's engine.
  starting the electrical systems of the ship's engine.

• Assessed, tested and operated variety of electrical components and systems.
• Connected wires to circuit breakers and transformers.
• Installed conduit, wire and motor controls.
• Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
• Examined and created solutions to repair high voltage electrical system problems.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
• Interpreted schematics, blueprints and diagrams to complete projects on time.
• Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problem.
• Leveraged drawings and manuals to design and implement electrical systems for new installations.
• Developed accurate estimates and proposals to perform electrical installations and troubleshooting.
• Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
• Planned and installed complicated circuit systems in both commercial and residential construction.
• Reported improper conduct and events to maintain safe working environment.
• Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.
• Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
• Collaborated with architects and electrical and mechanical engineers on continuous improvement efforts to optimize reliability and value.
• Low Voltage cable technician
• Utilized effective troubleshooting methods, removed malfunctioning components and identified wiring issues to restore systems to working order.
• Assessed project blueprints and drawings to assess project scope and required materials.
• Set up and performed routine maintenance on fire alarm, security and closed circuit TV systems for various clients.
• Maintained detailed logs of installation, repair and updating services.
• Kept detailed inventory records of parts and materials and took note of potential shortages or problems.
• Conducted diagnostic tests to assess wire, part and system malfunctions.
• Provided estimates to clients and supervisors detailing costs, time and materials needed.
• Scheduled routine system inspections and preventive maintenance.
• Provided exceptional oversight and supervision to new hires and showed each how to properly install low voltage wiring systems.
• Supervised work teams and oversaw multiple security system assignments each shift.
• Read and interpreted technical manuals, drawings and schematics to make accurate repair decisions.
• Performed preventive, predictive and corrective maintenance to keep machinery running at optimal levels.
• Demonstrated professional attitude and exemplary composure in every internal and customer interaction to promote collaboration and team success.
• Recommended and initiated modifications to mitigate risks and achieve design compliance.
• Manipulated computer-aided design software to produce electronics drawings and graphics for industrial control.
• Leveraged outstanding communication, interpersonal and people skills to work well with clients.
• Inspected newly installed equipment to adjust operating problems.
• Constructed and evaluated electrical components for consumer electronics applications in consumer electronic devices.
• Performed diagnostics and testing to locate root causes and resolve issues for optimal performance.
• Worked with engineers to troubleshot and resolve testing failures.
• Constructed and tested electronic circuits and installed point-to-point wire harnesses and connectors.
• Assembled and tested components, wiring and systems, locating and correcting faults.

• i did Electrical license >SEP`a< License which allows me to work in every country in Europe.
• I performed repair's of home electrical installation .do
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Raised quality control protocol, inspecting material for compliance.
• Eliminated project downtime by testing and installing pole breakers, CVTs and CTs, insulators and surge arrestors while terminating control wirings for breakers.
• Proactively channeled client feedback to create better solution plans.

laying down new electrical installation for brand new homes.

threading RIDGID PIPES OF different sizes and bending EMT AND RIDGID pipes.

'Working on similar panels as LUTRON CONTROL SYSTEMS,CCTV CAMERAS AND INTERCOM and also

Fire alarm systems and security.

• A BMS monitors, supervises, controls and reports on smart building technology systems. These systems may include access control, video surveillance, fire alarms, HVAC control, programmable lighting and electric power management.
• Running all low voltage cables
• Experience and knowledge of Distech/Honeywell/Schneider and programming BMS controls systems
• Troubleshoot, trace out, list & define problems with the BAS/BMS
• Monitoring of the BAS/BMS via in-house computers
• Respond to normal and emergency BAS/BMS calls
• Repair and replacement of associated components
• Monitoring, responding to and remediation of DDC/BMS System alarms
• Interaction with DDC/BMS outside vendors
• Make routine examination of the need for repairs and maintenance
• Prepares and maintains records on work performed and materials used
• Respond to other building emergencies
• Installation and upgrades of BMS controllers
• running fiber optic cables and installation of equipment for high data speed
• Set up and performed routine maintenance on fire alarm, security and closed circuit TV systems for various clients.
• Scheduled routine system inspections and preventive maintenance.
• Fiber optic Cable Technician
• Utilized software applications to monitor and troubleshoot telecom devices from remote locations.
• Connected wires and cables to terminals and attached and detached various kinds of hardware to wires, cables, buildings or poles.
• Measured signal strength of televisions, telephones and internet connections to verify adequate performance.
• Spliced cables with hand tools, epoxy or mechanical equipment.
• Created sensors and conducted thorough inspections to locate fiber optic system defects.
• Handled fibers for device routing, ribbon breakouts, component assemblies and custom splicing projects.

• Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull
  
  insulated wires or cables through the conduit to complete circuits between boxes.
  • Fasten small metal or plastic boxes to walls to house electrical switches or outlets.
  • Perform physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavy objects.
  • Installing electrical apparatus, fixtures and equipment for alarm and other systems
  • Prevent breakdown of systems by routinely inspecting and replacing old wiring and insulated cables, cleaning circuits etc.
  • Experience in industrial and/or commercial electrical systems
  • Excellent critical thinking and problem-solving ability
• 
  
• Installed conduit, wire and motor controls.
• Connected wires to circuit breakers and transformers.
• Interpreted schematics, blueprints and diagrams to complete projects on time.
• Tested equipment, connections and signals to verify security system functionality.
• Installed and repaired enterprise access controls, analog, digital CCTV and network configurations.
• Planned security installations by surveying locations, laying out equipment and reading wiring plans.
• Trained associates on proper operation of security systems to prevent false alarms.
• Reviewed life safety and security systems for code compliance.
• Communicated with customers regarding progress of equipment installation projects.
• Installed, tested and serviced alarm systems to determine correction functionality.
• Restored malfunctioning devices to original functionality and replaced as necessary.
• Determined appropriate tools and equipment needed to perform repairs on commercial and residential systems.
• Instructed customers on device's proper use and maintenance to extend life of equipment.
• Delivered exceptional level of service to each customer by listening to concerns and answering questions.
• Inspected fire and security alarm systems for both commercial and residential customers.
• Provided effective demonstrations of alarm systems so that customers understood how to use each feature.
• Tracked material and equipment inventory, upkeep and maintenance.
• Met with clients to discuss security features, needs and service costs.
• Input information from customer calls and onsite service visits into company's system
• Working on LUTRON CONTROL PANELS. running low voltage cables for designated area from Lutron Panel to switches and other device's like shade's and other home equipments.ted area from Lutron Panel to switches and other device's like shade's and other home equipments.

• Performed regular inspections to ensure alarm systems and equipment worked according to specifications.
• Installed fire alarm panels and devices and programmed equipment.
• Managed physical connections of Cat5 and coaxial cable, RJ45 clips and multimeter db, meter and phone butt sets.
• Showed strong written and verbal communication skills to assist with quality control and device maintenance.
• Demonstrated hands-on technical and mechanical skills, as well as experience with handling electronic devices and handhelds, among them desktops, workstations, iPad and iPhone.
• Attained skill in installation of fire alarm and control systems for commercial and residential facilities.
• Demonstrated efficiency in installations and maintenance individually or as part of collaborative, dedicated team.
• Worked in high-stress environments using ladders, scaffolds and high-lift equipment as well as in confined spaces such as ducts, crawlspaces and vents.
• Achieved proper alarm operation by testing hardware, connections and signals.
• Provided in-field customer service and dedication to satisfy user requirements for safety and visual assessment.
• Remained familiar with common equipment software installations such as Silent Knight, Firelite, Honeywell Vista and Altronix Fire.
• Maintained certifications and technical knowledge to comply with system deployment, management and disposal standards.
• Installed ground faults and open circuits for low-voltage and 120 VAC wiring.
• Pulled from in-depth knowledge of voltage systems and low-voltage circuitry.
• Programmed and installed conventional and networked alarm monitors for fire, security and water.
• Input information from customer calls and onsite service visits into company's system.
• Instructed customers on device's proper use and maintenance to extend life of equipment.
• Provided effective demonstrations of alarm systems so that customers understood how to use each feature.
• Inspected fire and security alarm systems for both commercial and residential customers.
• Determined appropriate tools and equipment needed to perform repairs on commercial and residential systems.
• Installed, tested and serviced alarm systems to determine correction functionality.
• Restored malfunctioning devices to original functionality and replaced as necessary.
• Met with clients to discuss security features, needs and service costs.
• Delivered exceptional level of service to each customer by listening to concerns and answering questions.
• Tracked material and equipment inventory, upkeep and maintenance.
• • Experience installing/bending conduit, running wires and installing fire alarm equipment Also Working on Ridgid Pipes, threading up to 4 inches pipes and also bending any size pipes

• Dug trenches and created holes to pull conduit and install supports.
• Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
• Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
• Replaced malfunctioning components for failing electrical setups.
• Transported required supplies and employees from headquarters to job site using company vehicles.
• Conducted maintenance and preventive programs.
• Built controllers and panels to complete system installations.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Kept work areas clean, neat and free of hazards.
• Maintained organization, cleanliness and safety in work areas.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Demonstrated strong foundation of safety knowledge and implemented industry best practices.
• Inspected existing wiring to identify short circuits.
• Resolved issues with existing systems and replaced malfunctioning parts.
• Utilized measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps accurately, efficiently and safely to complete installations and repairs.
• Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
• Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
• Promoted workplace safety and reported potential hazards quickly to Electrician and other people on the job site
• Performed installation, maintenance and tests of electrical energy systems and components by safely using all equipment and tools.
• Managed repairs and maintenance work on client systems and confirmed system adherence to coding requirements.
• Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
• Repaired and maintained over electrical systems continuously in multiple high-rise commercial and residential properties.
• Reviewed blueprints and electrical schematics to perform tasks to specifications.
• Measured and prepared supplies for electrical tasks.
• Set up equipment and configured settings for optimal performance.
• Worked in team-based environment to accomplish projects.
• Put in new new electrical components, fixtures and motors.
• Adhered to company standards and OSHA regulations for work site safety.
• Followed all relevant electrical and building codes for each job.
• Gathered required tools and equipment for each task to increase efficiency.
• Kept work areas clean, neat and organized for efficient operations.
• Listened to directives of senior electrical professionals to complete efficient tasks.
• CCTV AND ALARM TECHNICIAN AND INSTALLATION
• 
  
• Attained skill in installation of fire alarm and control systems for commercial and residential facilities.
• Installed, tested and serviced alarm systems to determine correction functionality.
• Restored malfunctioning devices to original functionality and replaced as necessary.
• Determined appropriate tools and equipment needed to perform repairs on commercial and residential systems.
• Instructed customers on device's proper use and maintenance to extend life of equipment.
• Delivered exceptional level of service to each customer by listening to concerns and answering questions.
• Inspected fire and security alarm systems for both commercial and residential customers.
• Provided effective demonstrations of alarm systems so that customers understood how to use each feature.
• Tracked material and equipment inventory, upkeep and maintenance.
• Met with clients to discuss security features, needs and service costs.
• Input information from customer calls and onsite service visits into company's system.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
• Prioritized and organized tasks to efficiently accomplish service goals.
• Juggled multiple projects and tasks to ensure high quality and timely delivery.
• Demonstrated self-reliance by meeting and exceeding workflow needs.
• Demonstrated leadership by making improvements to work processes and helping to train others.
• Provided excellent service and attention to customers when face-to-face or through phone conversations.
• Improved operations by working with team members and customers to find workable solutions.
• Motivated and encouraged team members to communicate more openly and constructively with each other.
• Installed wiring and panels and set configurations for security alarm systems, access control and CCTV systems.
• Engaged in troubleshooting procedures in newly- and previously-installed security systems, consulting manuals and applying technical expertise to resolve performance issues.
• Ran cables inside walls, within trenches and suspended in air in both residential dwellings and commercial buildings required for security system operation.
• Built client relations through professional composure and technical expertise to establish personal and company rapport and cultivate contract retention.
• Kept current on changes and developments on industry best practice and relevant technological advances to maintain optimal system operation and advise clients on latest developments.
• Conducted system tests to verify correct operation of newly installed components at both individual component and global system communication levels.
• Managed company-owned systems components and documentation in compliance with company policies, protecting proprietary information and company inventory.
• Brought new and existing systems into compliance with applicable legal and regulatory specifications.

• 159 West 25t
  h
  Street, 21 West 46t
  h
  Street, 134 West 37 Street.
• Certificate of Occupancy -building license
• Fire Safety Director - license
• House Tank and pressure sprinkler system.
• Building Site Safety
• Boiler - certification
• Previously I was working on 2 building which shift was 4 hours each where I was superintendent assistant and later I become a licensed superintendent on those buildings.
• Planned and managed general repairs and maintenance and construction projects.
• Coordinated building financial activities.
• Collected rents, deposits and payment of insurance premiums.
• Monitored facilities and identified maintenance and repair needs.
• Coordinated building operations, maintenance and improvements.
• Inventoried equipment and made frequent orders from vendors and distributors.
• Handled occupant complaints and dealt with issues.
• Managed building staff by scheduling, assigning tasks and training new hires.
• Conducted property walkthroughs to inspect building and occupant standards.
• Assisted with emergency response and evacuations.
• Verified property compliance with state and federal regulations avoiding discrimination or illegal practices.
• Fostered good working relationships with owners, residents and board members.
• Prepared detailed budgets and reports on financial conditions of property.
• Inspected grounds, facilities and equipment to determine repair and maintenance needs.
• Supervised production of annual rent, operating expense and real estate tax adjustments.
• Prepared and submitted monthly tenant visit logs.
• Regularly updated asset management staff regarding leasing and property status.
• Collected and maintained careful records of rental payments.
• Negotiated rates and prepared documents such as communization, pooling and production sharing agreements.
• Met with committees to discuss and resolve legal and environmental issues.
• Created staff schedules in response to community needs.
• Implemented business strategies to maximize tenant satisfaction and reduce vacancies.
• Monitored infrastructure and building expenses and reviewed and approved invoices.
• Liaised between company and owners to address and remedy ongoing concerns.
• Drafted staffing plans each week for staff of 3 workers.
• Met with landowners to secure access to mineral rights and facilitate company drilling on privately owned parcels.
• Oversaw daily operations, maintenance and administration of various properties.
• Established and implemented leasing goals while managing effective lease expiration program.
• Managed routine maintenance and emergency response services provided by contractors and vendors.
• Managed overall tenant relations, promoted tenant satisfaction and streamlined services delivery.
• Reviewed and approved or denied invoices related to property costs based on budgetary and contractual specifications.
• Cultivated rapport with clients to meet expectations for high-end event space rentals.
• Assisted owners with analyzing complex real estate documents and loan agreements.
• Recommended clarifications and changes in program policies to director of property management.
• Developed strong, professional relationships with residents by initiating collaboration and delivering exemplary service and engagement.
• Managed day-to-day activities involving tenants, subcontractors and property management.
• Maintained excellent customer relationships by adhering to "10 Pledges of Customer Service."
• Liaised between construction manager and tenant during build-out phase of tenant suite.
• Inspected properties, took pictures and developed engaging listings to promote sale and rental units.
• Enhanced event space quality by partnering with construction crews and contractors to complete maintenance and repairs.
• Implemented processes to provide residents benefits of clean, safe and well-maintained community.
• Developed and implemented strategic plan for property management.
• Compiled and conveyed operational and financial data to regional manager.
• Answered calls and responded to inquiries from various parties, using strong active listening and open-ended questioning skills to resolve problems.
• Worked with owner to identify, develop and achieve community goals and objectives.
• Showed tenants around properties, highlighting features and redirecting concerns to capture interest.
• Scheduled and supervised contractors to perform building upgrades and maintenance.
• Performed facility inspections on consistent basis and inputted all important data into thorough reports.
• Mentored building staff personnel, which boosted team dynamics and maintained pleasant workplace for all.
• Supervised removal of snow and ice from outdoor areas, building entrances, exits and parking lots.
• Handled variety of building maintenance responsibilities, including replacement of door locks and repair of heating and air conditioner problems.
• Oversaw projects through timely inquiry response, event coordination and on-site support for feature film productions and events.

• Listened to directives of senior electrical professionals to complete efficient tasks.
• Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
• Built controllers and panels to complete system installations.
• Inspected existing wiring to identify short circuits.
• Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
• Put in new new electrical components, fixtures and motors.
• Demonstrated strong foundation of safety knowledge and implemented industry best practices.
• Followed all relevant electrical and building codes for each job.
• Kept work areas clean, neat and free of hazards.
• Maintained organization, cleanliness and safety in work areas.-
• Maintained organization, cleanliness and safety in work areas.
• Adhered to company standards and OSHA regulations for work site safety.
• Resolved issues with existing systems and replaced malfunctioning parts.
• Measured and prepared supplies for electrical tasks.
• Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
• Dug trenches and created holes to pull conduit and install supports.
• Kept work areas clean, neat and organized for efficient operations.
• Transported required supplies and employees from headquarters to job site using company vehicles.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Set up equipment and configured settings for optimal performance.
• Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
• Worked in team-based environment to accomplish projects.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Reviewed blueprints and electrical schematics to perform tasks to specifications.
• Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
• Utilized effective troubleshooting methods, removed malfunctioning components and identified wiring issues to restore systems to working order.
• Assessed project blueprints and drawings to assess project scope and required materials

• Monitored and adjusted processes or equipment to improve quality and productivity.
• Kept parts within close tolerances of design standards to maintain optimal quality.
• Worked from layout and work order, created programs and set up machines to produce required parts.
• Observed company's strict safety rules during each shift to avoid job-related injuries.
• Loaded and unloaded different tool parts from trucks and storage areas.
• Developed solutions to wide range of complex technical problems to meet organizational objectives and deadlines.
• Loaded and unloaded machines to prevent expensive equipment issues.
• Performed routine maintenance on machines and monitored usage to reduce parts breakdown.
• Set-up and operated lathes, mills and grinders to cut raw materials.
• Fabricated various parts using multiple machines at once.
• Changed out aging tools, fixtures and offsets.
• Provided expert coaching and training for new team members.
• Operated hoists, cranes and other material handling equipment to lift heavy work pieces or move loads.
• Stopped machine operation to change tooling, setup, or workpiece placement according to required machining sequences.
• Read programming instructions and product blueprints to determine sequences and dimensional requirements.
• Verified proper cooling and lubrication of workpieces during machine operation.
• Controlled machine operations to complete precise, high-quality work.
• Transfer commands from servers to CNC modules using computer network links.
• Checked completed workpieces against specifications to assess conformance.
• Set up and operated computer-controlled machines or robots to perform machine functions on metal or plastic workpieces.
• Completed accurate calculations of machine speed, feed ratios and cut parameters.
• Aligned, mounted and installed tools and attachments on machines, using hand tools and precision measuring instruments.