Jack Willis
Williamston,SC
Summary
During my career as a fitter I've strived to achieve the highest level of work possible. I believe the experience I've gained during my time in construction would make me a valuable asset to any company where hard work and honesty are valued just as much as the bottom line.
Overview
7
7
years of professional experience
Work History
Field Supervisor
Liquid Systems
07.2023 - Current
- Ensured timely project completions through diligent monitoring of progress and proactive problem solving.
- Designed and installed new piping systems for clients
- Supervised work of three to four team members, offering constructive feedback regarding work performance.
- Use company vehicle and trailer to haul material from shop to jobsite
- Reduced downtime for clients by conducting thorough inspections and maintaining clear communication with team members.
- Maintained accurate records of field activities, ensuring proper documentation was available for internal reviews and audits.
Pipefitter
Brown And Root
04.2023 - Current
- Assisted with repairs to steam, drainage, and sewer lines.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Used problem-solving skills to alleviate issues efficiently with minimal supervision.
- Repaired and replaced pumps, valves and motors.
Pipefitter
The Industrial Company
10.2022 - 03.2023
- Appropriately fitted pipes by identifying dimensions, sizes and shapes needed to replace faulty pipes.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Worked closely with field engineers, management and quality control to exceed client expectations.
- Supervised 3 apprentices and offered specific recommendations to improve work quality.
- Eliminated risks by correctly identifying potential safety hazards.
- Planned pipe system layout, installation and repair according to specifications.
Pipefitter
IMS Belton
07.2022 - 10.2022
- Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
- Installed piping for plumbing systems for domestic and HVAC lines.
- Fabricated piping pieces and components in line with design specifications for each system.
- Eliminated risks by correctly identifying potential safety hazards.
- Filled pipe systems with water and air to determine location of leaks.
- Cut and drilled holes in walls to permit passage of pipes.
- Used clamps and brackets to attach pipes to walls, structures and fixtures.
Pipefitter
Thompson Construction Group Inc.
02.2022 - 07.2022
- Fabricated and installed screw pipe, socket weld and bw on carbon, stainless, special alloys
- Cut and drilled holes in walls to permit passage of pipes.
- Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
- Laid out full-scale drawings of pipe systems, supports and related equipment according to blueprints.
- Threaded pipes using piping machines.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
- Interpreted blueprints to determine locations, quantities and sizes of materials required.
Pipefitter
SWS Turner Industries
10.2021 - 12.2021
- Turnaround work in live ethylene unit.
- Demo and restore piping systems to code including steam, chemical, and pressure vessels.
- Working with crane and rigging.
- Hydrostatic testing of newly fabricated piping.
- Torquing flanges to client specifications
Pipefitter
Mullins Mechanical
05.2021 - 09.2021
- Interpreted blueprints to determine locations, quantities and sizes of materials required.
- Filled pipe systems with water and air to determine location of leaks.
- Fabricated piping pieces and components in line with design specifications for each system.
- Operated forklifts to move material and piping around jobsite.
- Planned and paced work efficiently in order to meet daily, weekly, project or production goals.
Pipefitter
Turner Industries
09.2020 - 03.2021
- Followed safe work practices, which included fall protection and personal protective equipment.
- Performed pneumatic and hydrostatic testing of systems and modified, repaired or expanded upon existing systems based on thorough understand of working mechanics.
- Rigged for heavy lifts according to blueprint requirements
- Worked at heights and in confined spaces without difficulty
- Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing
Pipefitter
McDermott
09.2019 - 04.2020
- Performed and planned installation of piping spools into pipe rack.
- Made fits for pipe up to 60".
- Walked down piping packages to plan future work and check existing/installed piping for turnover.
- Measured, marked, cut, bored, fitted and installed various piping or structural components in accordance with blueprints and job specifications using hand and power tools
- Rigged cables and pipes in configurations to support loads and maintain crew safety
- Worked at heights and in confined spaces without difficulty
Pipefitter
Titan Contractors
06.2019 - 08.2019
- Followed safe work practices, which included fall protection and personal protective equipment.
- Read blueprints to ensure accuracy of pre-fabricated spools
- Corresponded with supervisor to identify and carry out projects, implementing repairs, expansions and new installations according to customer requirements
- Fabricated, assembled, installed and maintained piping systems
Pipefitter
Performance Contractors
09.2018 - 05.2019
- Fabricated, assembled, installed and maintained piping systems.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Operated man lifts to install rigging equipment
- Read blueprints to plan future work
- Threaded pipes using piping machines.
- Rigged cables and pipes in configurations to support loads and maintain crew safety
Pipefitter
QLM
11.2017 - 08.2018
- Followed safe work practices, which included fall protection and personal protective equipment.
- Fabricated, assembled, installed and maintained piping systems.
- Installed piping for plumbing systems for domestic and HVAC lines.
- Threaded pipes using piping machines.
- Installed piping systems using Victaulic and Megapress fittings.
Pipefitter, Structural Welder
Clarkson Industrial
03.2017 - 11.2017
- Followed Safe Work guidelines.
- Used SMAW process to install fabricate and install structural supports
- Tested welding and safety equipment to check performance.
- Maintained full set of personal tools to use on jobs, including stinger, wrenches and measuring tapes.
Education
SMAW Welding
ARCLabs
Piedmont, SC10.2016
High School Diploma -
Big Sky High School
Missoula, MT06.2011
Skills
- Safety and compliance (over 12,000 safe man hours worked without incident)
- Industrial pipefitting
- Installation and maintenance
- Hand and power tools
- Piping specifications
- Blueprints and schematics
- Critical Thinking
- Risk Identification
- Material Loading and Unloading
- Superior Work Ethic
Timeline
Field Supervisor
Liquid Systems
07.2023 - Current
Pipefitter
Brown And Root
04.2023 - Current
Pipefitter
The Industrial Company
10.2022 - 03.2023
Pipefitter
IMS Belton
07.2022 - 10.2022
Pipefitter
Thompson Construction Group Inc.
02.2022 - 07.2022
Pipefitter
SWS Turner Industries
10.2021 - 12.2021
Pipefitter
Mullins Mechanical
05.2021 - 09.2021
Pipefitter
Turner Industries
09.2020 - 03.2021
Pipefitter
McDermott
09.2019 - 04.2020
Pipefitter
Titan Contractors
06.2019 - 08.2019
Pipefitter
Performance Contractors
09.2018 - 05.2019
Pipefitter
QLM
11.2017 - 08.2018
Pipefitter, Structural Welder
Clarkson Industrial
03.2017 - 11.2017
SMAW Welding
ARCLabs
High School Diploma -
Big Sky High School
Similar Profiles
Leon DavidsonLeon Davidson
Formwork Labourer at Liquid SystemsFormwork Labourer at Liquid Systems
Nitish ShrimalNitish Shrimal
Scientiest/Engineer SD at Liquid Propulsion Systems Centre, ISROScientiest/Engineer SD at Liquid Propulsion Systems Centre, ISRO
Jamie TyquinJamie Tyquin
Terminal Supervisor /Terminal Manager/Operations M at Pacific Terminals/GrainCorp Liquid Terminals/Quantem Bulk Liquid ServicesTerminal Supervisor /Terminal Manager/Operations M at Pacific Terminals/GrainCorp Liquid Terminals/Quantem Bulk Liquid Services
Matthew TeachmanMatthew Teachman
Field Service Technician and Machine Operator at VertivField Service Technician and Machine Operator at Vertiv
Shannon FreemanShannon Freeman
Human Resources Manager at McAlister Design & Automation-Wauseon MachineHuman Resources Manager at McAlister Design & Automation-Wauseon Machine