Jacque Bemis

• Diagnosed problems using test equipment such as multimeters, power supplies.
• Replaced defective components or parts as needed.
• 
  
• Utilized a variety of hand tools including soldering irons, screwdrivers, pliers, cutters, wire strippers and crimpers.
• Managed quality control and maintained high level of custom remodeling.
• Disassembled and repaired damaged sections and fabricated replacements.
• Adhered to applicable regulations, policies and procedures for health, safety and environmental compliance.
• Negotiated with vendors and suppliers to source replacement parts.
• Adjusted, connected, or disconnected wiring, piping and tubing to complete repairs and installations.
• Followed safety guidelines and wore protective gear when using power drills, circular saws and other power tools.
• Installed new appliances, wiring and machinery in homes with defective equipment.

• Performed detailed measurements and calculations for construction projects.
• Inspected structures and identified areas that need repairs or renovation.
• Applied waterproofing sealants to protect masonry against moisture penetration.
• Cut and shaped stones to fit around curved surfaces or irregular angles.
• Assembled scaffolding systems for working at heights safely.
• Installed flashing around windows, doors and rooflines to prevent water damage.
• Cleaned debris from work sites after completion of each job.
• Operated power saws to cut lumber into desired shapes and sizes.
• Inspected completed jobs for quality assurance purposes.
• Provided assistance in loading materials onto trucks for delivery.
• Adhered strictly to safety regulations while performing all tasks.
• Performed various carpentry duties, including both rough and finish carpentry.
• Used various carpenter's hand tools, portable power tools and standard measuring instruments.
• Shaped or cut materials to proper measurements using hand tools, machines or power saws.
• Repaired or replaced damaged or defective parts using power tools and equipment.
• Cut timber, panels and other wooden materials according to measured dimensions.
• Used band, circular and compound miter saws.
• Promoted team safety by keeping work areas free of hazards.
• Conducted inspections, diagnosed problems, took measurements and made necessary adjustments to complete projects according to specifications.
• Reviewed jobsite needs with foreman and coordinated construction.
• Prioritized work, keeping carpentry jobs on task and within budget.
• Maintained clean and organized workplace to optimize performance, efficiency and safety.
• Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
• Worked independently on projects and tasks within carpentry team.
• Took accurate measurements to calculate size and amount of materials needed for project completion.
• Measured and marked cut lines on materials using ruler or marking gauge.
• Removed damaged or defective parts or sections of structures and repaired or replaced using hand tools.
• Fashioned frameworks or props using hand tools and wood screws, nails or glue.
• Consistently constructed square and level projects.
• Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.
• Studied blueprints or building plans to prepare layout and materials required.
• Adhered to project blueprints and requirements to deliver quality work.
• Verified trueness of construction using plumb and level.
• Bore boltholes in wood, masonry or concrete using electric or pneumatic drill.
• Covered subfloors with building paper and lay hardwood or parquet floors by nailing to subfloor or cementing to mastic base.
• Maintained records and documented actions for progress reports.

• Supervised and coordinated the daily activities of property maintenance staff.
• Developed and implemented strategies for cost-effective maintenance operations.
• Ensured proper functioning of all equipment, systems, and structures on the property.
• Conducted regular inspections to identify any necessary repairs or improvements.
• Coordinated with contractors for major repairs or renovations to buildings and grounds.
• Maintained records of all work orders, invoices, and other related documents.
• Provided technical guidance to staff members regarding repair techniques and safety protocols.
• Responded quickly to emergency situations involving property damage or tenant needs.
• Identified potential hazards on the premises and took appropriate measures to reduce risks.
• Resolved complaints from tenants in a timely manner while maintaining excellent customer service standards.
• Organized preventative maintenance schedules for all building components including HVAC systems, plumbing fixtures, electrical wiring.
• Tracked inventory levels of supplies needed for maintenance operations and placed orders as needed.
• Kept up-to-date on changes in relevant technologies in order to suggest new solutions or methods of operation.
• Established policies and procedures related to safety practices during maintenance work.
• Collaborated with other departments such as engineering or facilities management when necessary.
• Assisted with training new employees in proper use of tools and equipment.
• Prepared and planned worksites to help jobs run smoothly.
• Delegated work to staff, setting priorities and goals.
• Reported project progress, site problems and labor status to supervisors.
• Created work crew schedules and delegated assignments.
• Established and enforced clear safety policies to protect workers from injury.
• Coordinated efficient maintenance schedules to keep systems running at peak levels.
• Allocated material and labor resources to promote on-time and under-budget project completion.
• Oversaw workforce schedules and allocated resources in order to achieve project goals.
• Conducted electrical repairs on motors, lighting systems, and other related components.
• Assisted in the installation of new machinery and equipment.
• Diagnosed mechanical problems using visual inspections and test instruments.
• Repaired or replaced faulty wiring, switches, relays, and other electrical components.
• Replaced defective parts such as bearings, seals, gears, valves.
• Troubleshot complex electrical and mechanical issues with minimal downtime.
• Installed new pumps, compressors, boilers and other mechanical systems.
• Responded promptly to emergency breakdowns at any time during shift hours.
• Cleaned work areas to maintain a safe environment free from debris or hazardous materials.
• Followed established safety procedures when operating heavy machinery.
• Monitored inventory levels of replacement parts and supplies needed for repairs.
• Operated hand and power tools to complete repairs.
• Installed new systems, replacement parts and components to maintain proper operation.
• Cleared clogged drains and replaced valves, faucets and fixtures.
• Scheduled preventive maintenance programs to keep equipment in good working condition.
• Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.
• Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
• Checked electrical components to identify defects and hazards and make necessary adjustments.
• Completed basic carpentry tasks and installed shelves, hooks and closet rods to meet customer needs.
• Replaced wall sockets, ran lines and completed basic carpentry to finish installations.
• Repaired machines, equipment or structures using tools or equipment.
• Performed routine maintenance by inspecting drives, motors or belts.
• Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
• Ordered parts, supplies or equipment from catalogs or suppliers.
• Dismantled machines, equipment, or devices to access and remove defective parts.
• Adjusted devices or control instruments using hand tools, levels or straightedges.
• Recorded type and cost of maintenance or repair work.
• Installed equipment to improve energy or operational efficiency of residential or commercial buildings.
• Estimated costs to repair machinery, equipment or building structures.

• Secured structural components together using nails, screws or glue guns.
• Measured and cut wood, plastic, drywall and other materials to specified dimensions using hand tools and power saws.
• Installed doors, windows, cabinets, frames and trim according to blueprints or verbal instructions.
• Constructed forms for pouring concrete foundations.
• Erected scaffolding and ladders for assembling structures above ground level.
• Built stairs, ramps, walls, partitions and frameworks of wood or metal studs.
• Repaired existing structures such as floors, roofs and door frames.
• Checked accuracy of finished product with measuring tools such as tape measures and levels.
• Assembled formwork for pouring concrete slabs or walls in accordance with engineering plans.
• Fitted interior fixtures including kitchen units, shelves and cupboards.
• Finished surfaces of carpentry work by applying coats of paint or varnish to protect surface from wear.
• Fabricated wooden jigs and templates to aid in the assembly process of parts in production runs.
• Maintained a safe working environment by adhering to safety regulations when operating machinery.
• Inspected buildings prior to start of construction projects for any existing damage that needs repair.
• Applied weatherproofing treatments to exterior surfaces such as decks and fences.
• Carried out general maintenance tasks on building sites including cleaning up debris and rubbish.
• Ensured all work is carried out according to local building codes.
• Interpreted drawings and blueprints accurately in order to determine layout requirements.
• Collaborated with other tradespeople onsite during construction projects.
• Performed minor repairs on damaged woodwork items such as window sills or door jambs.
• Followed OSHA and corporate safety regulations and procedures.
• Read and interpreted specifications, diagrams and blueprints to determine best techniques for job.
• Installed, assembled and repaired woodwork, millwork, cabinetry and trim.
• Managed movement of materials and equipment to different job sites.
• Shaped or cut materials to proper measurements using hand tools, machines or power saws.
• Used various carpenter's hand tools, portable power tools and standard measuring instruments.
• Used band, circular and compound miter saws.
• Studied blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.
• Reviewed jobsite needs with foreman and coordinated construction.
• Performed various carpentry duties, including both rough and finish carpentry.
• Cut timber, panels and other wooden materials according to measured dimensions.
• Promoted team safety by keeping work areas free of hazards.
• Installed building windows, trim and cabinetry alone or with assistants to meet job deadlines.
• Installed cabinets, base cabinets and crown molding.
• Examined buildings and project specifications to determine measurements.
• Contracted and collaborated with specialty sub-contractors for special trade jobs or installations.
• Anchored and braced forms to complete precise joining.
• Applied design-specific wood and composite trim according to architectural plans and neighborhood regulations.
• Positioned and installed floor joists, trusses and rafters.
• Maintained clean and organized workplace to optimize performance, efficiency and safety.
• Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
• Worked independently on projects and tasks within carpentry team.
• Took accurate measurements to calculate size and amount of materials needed for project completion.
• Installed windows, flooring or trim using hand or power tools.
• Removed damaged or defective parts or sections of structures and repaired or replaced using hand tools.
• Consistently constructed square and level projects.
• Roughed in door and window frames or subflooring in structures undergoing construction or repair.
• Verified trueness of construction using plumb and level.
• Bore boltholes in wood, masonry or concrete using electric or pneumatic drill.
• Measured and cut granite slabs to fit specific dimensions of countertops.
• Prepared and installed granite countertop components such as sinks, faucets, and cooktops.
• Set and leveled granite pieces in place using adhesives, sealants, and other materials.
• Fabricated custom-made pieces for special applications according to blueprints or drawings.
• Polished surfaces of newly installed granite countertops with grinders, sanders, polishers, buffers and other tools.

• Installed doors, windows, cabinets, frames and trim according to blueprints or verbal instructions.
• Erected scaffolding and ladders for assembling structures above ground level.
• Built stairs, ramps, walls, partitions and frameworks of wood or metal studs.
• Repaired existing structures such as floors, roofs and door frames.
• Checked accuracy of finished product with measuring tools such as tape measures and levels.
• Assembled formwork for pouring concrete slabs or walls in accordance with engineering plans.
• Fitted interior fixtures including kitchen units, shelves and cupboards.
• Finished surfaces of carpentry work by applying coats of paint or varnish to protect surface from wear.
• Fabricated wooden jigs and templates to aid in the assembly process of parts in production runs.
• Maintained a safe working environment by adhering to safety regulations when operating machinery.
• Applied weatherproofing treatments to exterior surfaces such as decks and fences.
• Carried out general maintenance tasks on building sites including cleaning up debris and rubbish.
• Ensured all work is carried out according to local building codes.
• Interpreted drawings and blueprints accurately in order to determine layout requirements.
• Collaborated with other tradespeople onsite during construction projects.
• Performed minor repairs on damaged woodwork items such as window sills or door jambs.
• Followed OSHA and corporate safety regulations and procedures.
• Read and interpreted specifications, diagrams and blueprints to determine best techniques for job.
• Installed, assembled and repaired woodwork, millwork, cabinetry and trim.
• Managed movement of materials and equipment to different job sites.
• Spoke with customers to gain better understanding of scope of project.
• Shaped or cut materials to proper measurements using hand tools, machines or power saws.
• Used various carpenter's hand tools, portable power tools and standard measuring instruments.
• Studied blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.
• Used band, circular and compound miter saws.
• Reviewed jobsite needs with foreman and coordinated construction.
• Performed various carpentry duties, including both rough and finish carpentry.
• Repaired or replaced damaged or defective parts using power tools and equipment.
• Cut timber, panels and other wooden materials according to measured dimensions.
• Conducted inspections, diagnosed problems, took measurements and made necessary adjustments to complete projects according to specifications.
• Promoted team safety by keeping work areas free of hazards.
• Installed building windows, trim and cabinetry alone or with assistants to meet job deadlines.
• Installed cabinets, base cabinets and crown molding.
• Led apprentices and trainees in building construction and renovation.
• Examined buildings and project specifications to determine measurements.
• Contracted and collaborated with specialty sub-contractors for special trade jobs or installations.
• Anchored and braced forms to complete precise joining.
• Applied design-specific wood and composite trim according to architectural plans and neighborhood regulations.
• Prioritized work, keeping carpentry jobs on task and within budget.
• Positioned and installed floor joists, trusses and rafters.
• Cut and installed tile and hardwood flooring for residential and commercial buildings.
• Measured, cut and installed staircase spindles.
• Laid and stained oak casings and hardwood floors.
• Maintained clean and organized workplace to optimize performance, efficiency and safety.
• Utilized various tools, equipment, materials and forming systems to complete construction tasks.
• Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
• Worked independently on projects and tasks within carpentry team.
• Took accurate measurements to calculate size and amount of materials needed for project completion.
• Installed windows, flooring or trim using hand or power tools.
• Measured and marked cut lines on materials using ruler or marking gauge.
• Removed damaged or defective parts or sections of structures and repaired or replaced using hand tools.
• Fashioned frameworks or props using hand tools and wood screws, nails or glue.
• Supervised and coordinated the activities of a team of carpenters to ensure projects were completed in a timely manner.
• Ensured safety protocols were adhered to on all job sites, prepared work schedules and delegated tasks accordingly.
• Provided technical guidance to carpenters as needed, monitored progress of assigned projects and addressed any issues that arose.
• Performed carpentry duties such as measuring, cutting, fitting, nailing, fastening and installing materials according to instructions.
• Interpreted blueprints or drawings for construction projects and ensured accuracy of measurements.
• Trained new hires in safe use of tools and equipment; reviewed safety guidelines with crew members regularly.
• Inspected job sites before beginning work to identify potential hazards or risks.
• Ordered necessary materials for each job site based on project plans or specifications provided by clients.
• Reported any discrepancies between orders received and actual material delivered onsite.
• Organized storage areas at job sites in order to maintain a clean working environment while protecting tools from theft or damage.
• Resolved customer complaints promptly when they arose during the course of a project.
• Developed strategies for efficient workflow throughout the duration of each project.
• Conducted daily inspections of worksites to ensure quality standards were met.
• Monitored employee productivity levels; conducted performance reviews on an ongoing basis.
• Adhered strictly to all applicable building codes, regulations and safety laws.
• Read blueprints, drawings and sketches to grasp project requirements and appropriately assign teams.
• Followed OSHA and corporate safety regulations to avoid on-the-job injuries and accidents.
• Reviewed project plans and blueprints and estimating needed time and materials.
• Examined and inspected work progress, equipment and construction sites to verify safety and meet specifications.
• Performed rough and finish carpentry on cabinets, tables and chairs.
• Trained and mentored employees, offering assistance and insight into completing job tasks when needed.
• Participated in recruiting initiatives and recommended hires for trades staff.
• Delegated duties to employees based on skillset.
• Prepared and planned worksites to help jobs run smoothly.
• Reported project progress, site problems and labor status to supervisors.

• Managed a team of 8 workers to complete tasks in an efficient manner.
• Supervised and coordinated activities of workers engaged in construction, repair, and maintenance of structures.
• Inspected work sites and equipment to ensure safety regulations are followed.
• Conducted regular safety meetings with crew members to ensure safe practices are being used during operations.
• Assigned tasks to crew members based on their skill level and experience.
• Provided technical guidance to crew members when needed.
• Ensured that the job was completed according to specifications and within budget constraints.
• Ordered materials as needed for completion of projects.
• Maintained records of daily progress reports and submitted them to the project manager at the end of each shift.
• Resolved conflicts between employees regarding work assignments or job performance issues.
• Scheduled inspections by government officials or third-party agencies when required.
• Adhered strictly to all federal, state, local laws and regulations pertaining to health and safety standards on the job site.
• Interpreted blueprints and job orders to workers and assigned duties.
• Trained team members in best practices and company standards.
• Attended crew safety meetings, discussing proper use of personal protective equipment to minimize accidents.
• Assisted foreman and project manager to execute job layout plan.
• Verified material and supply accuracy to incorporate change orders when necessary.
• Planned worker hours depending on set and production times.
• Supervised projects to uphold schedule requirements and quality demands.
• Managed workers at various experience levels in construction.
• Communicated with employees to demonstrate high standards and mitigate issues.
• Checked project details to verify job site materials and equipment.
• Inspected rigging and scaffolding for safety and reliability.
• Delegated duties to employees based on skillset.
• Responsible for all exterior layout, bench marks and grade marks of window locations and elevations, door location as well any reveals located within exterior walls while leading a crew of eight during the plumb, level and square process of building each project. (Mostly schools and Kaiser hospitals )

9

• Time spent working in the California Conservation Corp. Though I only spent one year working with the CCC I was trained and certified in wild land fire fighting as well as deployed in fighting some of northern California's fires during this time. I was also trained in the use of search and rescue by grid mapping where I also spent time participating in search and rescue of missing persons. I also received promotions to the position of '' wood and tool specialist' where I was involved in the training of safe practices in the use of chainsaws in falling trees and clearing of the terrain while keeping tools of the trade properly maintained at all times. Other times when needed I performed duties of acting crew leader during daily activities.