Jadd Davis

• Repairs, modifications, testing, troubleshooting, installations and performing final functional and operational tests of complex systems and devices on military aircraft, components and accessories, with intricate components under actual or ground power such as Oxygen, engine components, fueling, bleed air, utilities, hydraulic and pneumatic systems.
• Recorded maintenance performance in aircraft logbooks and completed other paperwork requirements.
• Performed routine maintenance on aircrafts including servicing fluids and lubricating moving parts.
• Inspected aircraft components and systems for wear, corrosion, or other defects.
• Conducted periodic inspections of landing gear assemblies for signs of wear.
• Read engineering drawings and technical manuals to determine repair needs.
• Monitored engine run-ups to identify any problems that may require further attention.
• Checked hydraulic systems for leaks or malfunctioning components.
• Completed flightline, hangar maintenance and repairs on assigned aircraft.
• Serviced and lubricated aircraft and subsystems as directed.
• Read and interpreted safety rules, operating and maintenance instructions and procedure manuals to solve problems.
• Cultivated safe and organized work area by maintaining active control over tools and equipment and retaining FOD awareness at all times.
• Used precision measuring instruments to check alignment of structures during installation process.
• Preserved units or parts during work process, installation and storage.
• Utilized specialized tooling when performing repairs on complex aircraft systems.
• Collaborated with other technicians to diagnose complex malfunctions.
• Briefed and debriefed pilots and crew members performing functional check flights.
• Used current data and proper tools to perform maintenance.
• Inspected parts or aircraft to identify defects, proper fluid levels and general wear.
• Operated ground support equipment such as hoists, jacks, and test stands.
• Replaced worn out gaskets and seals when necessary.
• Performed time compliance technical orders and service instructions to install structural components.
• Assisted in the assembly of structural components such as tail sections, wings, fuselage panels, and flight control surfaces.
• Tested mechanical units to ensure proper performance.
• Completed detailed documentation associated with all maintenance activities performed on an aircraft.
• Installed approved modifications to the aircraft structure.
• Trained 33 new employees on company policies and protocols.
• Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
• Disassembled and overhauled internal combustion engines, pumps and generators.
• Performed major overhaul maintenance to return aircraft back to flight status.

• Performed special and phase inspections, daily and turnaround inspections, audits on special programs, and trained over 200 personnel on V-22 maintenance as Quality Assurance Representative.
• Applied sealants to prevent leakage of fluids from joints and seams between structural members.
• Cleaned repaired areas before applying primer coatings or paint finishes to the surface of the repaired structure.
• Maintained accurate records of work performed on each aircraft in accordance with FAA requirements.
• Utilized precision measuring instruments such as calipers, micrometers and dial indicators during inspection processes.
• Fabricated replacement parts using sheet metal cutting shears, brakes and forming dies when necessary.
• Repaired damaged structures such as wings and fuselage frames using hand tools and power tools.
• Inspected and tested aircraft components for conformance to specifications.
• Followed safety regulations while working around hazardous materials including fuels, lubricants, hydraulic fluid.
• Assisted in troubleshooting complex problems related to aircraft structure.
• Installed new structural parts, such as stringers, ribs, bulkheads, floor boards, control surfaces and tail sections.
• Assembled aircraft subassemblies by bolting or riveting components together.
• Drilled holes in structural parts for rivets or bolts.
• Provided guidance and training to less experienced mechanics on the job site.
• Performed maintenance on airframes, engines, instruments, and other aircraft systems according to established procedures.
• Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
• Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
• Executed corrosion control and inspection duties with no supervision.
• Reviewed work orders and discussed with supervisors.
• Maintained aircraft environmental systems, oxygen systems, fire extinguishing systems and utility systems.
• Planned work procedures using charts, technical manuals and experience.
• Utilized electronic testing equipment to troubleshoot fuel, ignition and emissions control systems.
• Inspected and verified dimensions and clearances of parts to verify conformance to factory specifications.
• Tested components and systems using infrared engine analyzers, compression gauges and computerized diagnostic devices.
• Disassembled and overhauled internal combustion engines, pumps and generators.

Developed and implemented corrective action plans to address identified issues.

• Maintained accurate records of test results, inspection data, and corrective actions taken when necessary.
• Inspected incoming material for correct size, shape, color, or other characteristics as required by customer orders.
• Prepared reports summarizing findings from inspections and testing activities.
• Ensured that all safety regulations were followed during inspections and tests.
• Reviewed engineering drawings, blueprints, and specifications for accuracy prior to production run commencing.
• Verified that all manufactured parts met design tolerances using precision measuring instruments such as calipers and micrometers.
• Developed standard ground operating procedures for quality control processes.
• Analyzed rejected materials and determined root cause of failure or defect.
• Trained newly hired employees by explaining company procedures, job duties and performance expectations IAW NAMP procedures.
• Conducted tests on components and finished products to verify conformance to specifications.
• Monitored production operations to identify potential problems with quality assurance.

• Inspected, cleaned, serviced, removed, replaced, and installed defective aircraft parts, performed special, phase, daily, and turnaround inspections, and performed engine throttle control rigging on FA/18 model aircraft.

• Reviewed resumes, conducted phone screens, and managed candidate pipelines.
• Explained job duties, compensation and benefits to potential candidates.
• Sourced and screened potential candidates for open positions.
• Coordinated background checks on successful candidates prior to offer acceptance.
• Developed job descriptions and postings to attract qualified applicants.
• Provided ongoing support throughout the entire recruitment life cycle processes.
• Negotiated salaries and other employment terms with successful applicants.
• Maintained Applicant Tracking System records of all applicants.
• Developed recruitment strategies to achieve required staffing levels for assigned requisitions.
• Advertised and promoted open positions using social media and digital marketing procedures.
• Worked with senior leadership to develop comprehensive recruitment strategies for long-term implementation.
• Conducted in-depth interviews with top candidates to assess skills and fit.
• Assisted in onboarding of new hires by providing orientation materials and training sessions.
• Monitored applicant tracking system actions to support hiring deadlines and streamline candidate experiences.
• Trained and mentored newer recruiters in successful strategies for interviewing and qualifying candidates.
• Organized recruitment activities such as career fairs, campus visits.
• Managed candidate activity within Applicant Tracking System (ATS).
• Attended career fairs and networking events to help fill openings and build candidate pipeline.
• Utilized internal recruiting systems to record, update and track all candidate progress.

• Assembled subassemblies made up of sheet metal parts into larger assemblies using bolts, nuts, screws and rivets.
• Removed damaged or worn out parts from airframes and replaced them with new ones.
• Measured dimensions of assembled components using precision measuring instruments like micrometers, calipers.
• Drilled holes in fuselage sections during repair work using portable electric drills or pneumatic drills.
• Replaced defective parts on aircraft frames using hand tools and power tools.
• Inspected rivets used in the assembly of various types of aircraft structures according to established standards.
• Maintained various aircraft systems, including air conditioning, cabin, and cockpit heat and pressurization and ventilation.
• Read blueprints and technical manuals for understanding the structure of an aircraft before repairing it.
• Maintained records related to inspection results, repairs done and spare parts used during maintenance activities.
• Tracked repair and maintenance activities with daily log updates and thorough reports.
• Installed electrical wiring systems for avionics equipment such as radars, navigation systems, and communication devices.
• Operated machinery such as shears, presses and brakes for fabricating sheet metal parts required for repairs.
• Serviced all types of aircraft systems, including brakes, air handling, and electrical.
• Performed inspections and maintenance of aircraft components, including engines, wings, and landing gear on FA-18 aircraft.
• Applied sealants and adhesives to ensure a secure fit between different components of an aircraft frame.
• Performed troubleshooting operations on malfunctioning airplane systems such as hydraulic components, landing gear, flight controls, actuators, engines, environmental systems, and fuel tanks.

• Fabricated complex assemblies by cutting, forming and welding metal components according to maintenance manuals.
• Operated machinery such as shears, presses and brakes for fabricating sheet metal parts required for repairs.
• Assembled subassemblies made up of sheet metal parts into larger assemblies using bolts, nuts, screws and rivets.
• Inspected, removed and replaced components of hydraulic systems and replaced gaskets and wipers in hydraulic components.
• Maintained various aircraft systems, including air conditioning, cabin, and cockpit heat and pressurization and ventilation.
• Maintained records related to inspection results, repairs done and spare parts used during maintenance activities.
• Performed troubleshooting operations on malfunctioning airplane systems such as hydraulic lines or fuel tanks.
• Completed daily inspections of each aircraft to check flight readiness.
• Serviced all types of aircraft systems, including brakes, air handling, and electrical.
• Tested all installed components for proper operation prior to returning the aircraft to service.
• Installed electrical wiring systems for avionics equipment such as radars, navigation systems, and communication devices.
• Performed inspections and maintenance of aircraft components, including engines, wings, and landing gear.
• Repaired structural damage to aircraft in accordance with manufacturer's specifications.
• Inspected rivets used in the assembly of various types of aircraft structures according to established standards.
• Installed and rigged landing gear flight controls, actuators, hydraulic components environmental controlsystem and engine components.

• Performed daily, turnaround, special, and phase inspections on FA-18 aircraft, serviced engines, hydraulic reservoirs, aircraft tires, liquid oxygen bottles, and generators, removed and installed various aircraft components, and fabricated fuselage structures and panels.
• Maintained accurate records of work performed on each aircraft in accordance with FA-18 publications.
• Fabricated replacement parts using sheet metal cutting shears, brakes and forming dies when necessary.
• Installed new structural parts, such as stringers, ribs, bulkheads, flight control surfaces.
• Assembled aircraft subassemblies by bolting or riveting components together.
• Performed aircraft inspections and Collateral Duty Inspector and Plane Captain.
• Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
• Used diagnostics and troubleshooting tools to identify failures and equipment issues.
• Maintained aircraft environmental systems, oxygen systems, fire extinguishing systems and utility systems.