Jason Allen

• I am currently employed with KIRA. I went to school for four months to acquire my UA21 certification in April of 2020. My duties are fixing heavy equipment, handrails/guardrails, piping systems, etc. I have been with KIRA since 7/29/2019.

• Interpreted blueprints to determine the location, quantity and size of materials required to complete tasks
• Laid metal decking and installed safety railings accurately and according to specifications
• Notified supervisors about project and jobsite issues in an effort to find the most effective solutions
• Assisted with modular erection and ensuring that steel members were properly placed
• Followed strict procedures in regards to heavy machinery operation to prevent accidents and mishaps
• Joined steel units and welded into place, checking every portion of the unit to maintain accuracy
• Studied blueprints for each project and worked closely with supervisors to fulfill requirements
• Used cranes to lift and guide individual steel components into position
• Unloaded and positioned prefabricated steel units for hoisting
• Identified problems that occurred on the job and took cost-saving measures to provide resolution
• Safely used metal shears, hacksaws, bar cutters and other tools to cut metal components for installation
• Positioned steel units, aligned holes and inserted temporary bolts while checking alignments and joining steel parts using simple torque and hand tools
• Encouraged all workers to take precautions that could prevent mishaps and injuries on the job
• Studied blueprints, drawings and specifications to determine the layout of work
• Supervised crew members in proper steel placement in proper locations
• Removed and replaced existing grating and structural steel with new materials
• Performed mod assembly, erected and connected structural steel and leveled and torqued connections after steel placement

• Analyzed job sites daily to mitigate risks for workers and visitors
• Planned and delegated work for multiple construction crews
• Managed team member schedules and individual assignments for work crew
• Reported to supervisors weekly regarding project progress, site problems and labor status
• Planned and delegated work to meet planned project and production goals
• Complied with federal and company regulations to ensure that all job sites maintained high level of safety
• Monitored parts and equipment used at job sites
• Assigned duties to each employee based upon his or her skills set and monitored progress daily
• Maintained high standards of safety, productivity and quality for every job
• Evaluated schedules, orders and forecasts to plan operational processes and meet timetables
• Upheld schedule requirements and quality demands with hands-on project supervision
• Assessed production schedules and orders to plan material requirements and activities of workers
• Assessed job equipment daily to determine maintenance requirements
• Perform multiple welding tasks on structural components and QC all work performed

Analyzed project details to ensure correct materials and equipment for job sites

• Monitored and supported all shop projects while maintaining high quality, on-time delivery and safety while staying within budget
• Notified supervisors about project and jobsite issues in an effort to find the most effective solutions
• Supervised crew members in proper steel placement in proper locations
• Performed mod assembly, erected and connected structural steel and leveled and torqued connections after steel placement
• Joined steel units and welded into place, checking every portion of the unit to maintain accuracy
• Safely used metal shears, hacksaws, bar cutters and other tools to cut metal components for installation
• Positioned steel units, aligned holes and inserted temporary bolts while checking alignments and joining steel parts using simple torque and hand tools
• Used cranes to lift and guide individual steel components into position
• Encouraged all workers to take precautions that could prevent mishaps and injuries on the job
• Followed strict procedures in regards to heavy machinery operation to prevent accidents and mishaps
• Studied blueprints for each project and worked closely with supervisors to fulfill requirements
• Studied blueprints, drawings and specifications to determine the layout of work
• Interpreted blueprints to determine the location, quantity and size of materials required to complete tasks
• Identified problems that occurred on the job and took cost-saving measures to provide resolution
• Unloaded and positioned prefabricated steel units for hoisting
• Assisted with modular erection and ensuring that steel members were properly placed

• Set up and operated welding equipment to complete all welding projects on-time
• Prevented distortion of parts by monitoring fitting, burning and welding processes
• Scraped off excess spatter and other materials using portable grinders and arc-cutting equipment
• Obtained desired configurations by clamping and tack-welding components
• Adjusted gas flow and pressure to create and maintain desired flames
• Removed loose materials and thick scale, slag or rust to prepare material surfaces for welding
• Checked tools, equipment and safety gear for proper performance
• Maintained clean and tidy work area
• Kept complete set of tools and gear for use on each job, including hammers, stinger and socket set
• Inspected and repaired components to implement corrective action
• Improved project completion time by multitasking on heavy equipment such as forklifts
• Created safety guards, angle iron and square tubing
• Improved project completion time by multi-tasking on heavy equipment such as forklifts
• Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work
• Studied equipment and tools to determine project specifications based on metallurgy, SMAW and MIG welding techniques
• Used Oxy/Acetylene torches cut, contour and bevel metal and structural shapes to accurate dimensions
• Set up equipment and welded parts according to welding chart specifications and type
• Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials
• Welded steel materials using SMAW, continuously checking for safety and quality
• Safely ignited torches and perform welding operations while closely monitoring surroundings to effectively complete steel erection projects

• Assisted foreman with modular erection and ensuring that steel members were properly placed
• Followed strict procedures in regards to heavy machinery operation to prevent accidents and mishaps
• Safely used metal shears, hacksaws, bar cutters and other tools to cut metal components for installation
• Positioned steel units, aligned holes and inserted temporary bolts while checking alignments and joining steel parts using simple torque and hand tools
• Notified supervisors about project and jobsite issues in an effort to find the most effective solutions
• Used cranes to lift and guide individual steel components into position
• Joined steel units and welded into place, checking every portion of the unit to maintain accuracy
• Unloaded and positioned prefabricated steel units for hoisting
• Laid metal decking and installed safety railings accurately and according to specifications
• Performed mod assembly, erected and connected structural steel and leveled and torqued connections after steel placement

• Created safety guards, angle iron and square tubing
• Inspected and repaired components to implement corrective action
• Prevented distortion of parts by monitoring fitting, burning and welding processes
• Adjusted gas flow and pressure to create and maintain desired flames
• Set up and operated welding equipment to complete all welding projects on-time
• Precision cutting with power saws, hand shears and chipping knives
• Improved project completion time by multi-tasking on heavy equipment such as forklifts
• Removed loose materials and thick scale, slag or rust to prepare material surfaces for welding
• Inspected chains, hammers and other tools for damage or wear to prevent injuries and accidents
• Laid out, fitted and fabricated metal components
• Improved project completion time by multitasking on heavy equipment such as forklifts
• Applied knowledge of metallurgy, geometry and welding techniques to determine optimal welding strategies
• Completed minor and major touch ups with MIG welders. Proficient in fabrication with MIG welder
• Operated manual and semi-automatic welding equipment to fuse metal segments together
• Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment
• Prepared broken parts for welding by properly grooving and scarfing surfaces
• Followed all safety guidelines, including proper machine guarding and lockout and tagout procedures
• Obtained desired configurations by clamping and tack-welding components
• Application of electrode and gun along weld line to create precision pieces
• Repaired and maintained heavy-duty and construction machinery
• Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials
• Positioned and clamped workpieces together and properly assembled in jigs and fixtures
• Scraped off excess spatter and other materials using portable grinders and arc-cutting equipment
• Adjusted weld machines to correct settings prior to weld applications for precision and waste reduction
• Cleaned and degreased weld joints and workpieces efficiently
• Responded to service calls quickly and professionally
• Maximized shop organization and equipment length by efficiently cleaning floor and machinery
• Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work