Jason Donnellan

• Constructed stairways from pre-cut stringers and risers.
• Assisted carpenters in the installation of cabinets, doors or trim moldings.
• Secured timbers or lumber with nails or bolts according to blueprint specifications.
• Inspected ceiling joists, wall studs and floor beams prior to installation.
• Supported bricklayers by providing ladders or scaffolds when needed.
• Maintained a clean job site by disposing of all wood scraps properly.
• Cut openings in walls or floors to accommodate pipes and duct work.
• Checked roofs for proper alignment after installing trusses or rafters.
• Aligned frames with plumb bobs, levels and laser equipment.
• Installed roofing felt, shingles and siding on exterior of buildings.
• Built scaffolding for use in constructing tall buildings.
• Installed window frames into walls before covering them with drywall.
• Filled nail holes, cracks in walls or joints between panels with caulking material.
• Assembled and erected forms for pouring concrete foundations, walls, columns and slabs.
• Screwed together boards for sub-flooring, walls or other construction projects.
• Framed interior wall partitions made of gypsum board or other materials.
• Ensured that all building codes were met during the construction process.
• Erected wooden structures such as rafters, studding, joists and trusses.
• Read blueprints or instructions to determine the type of framing required.
• Measured and cut lumber to specified size, using power saws and hand tools.
• Repaired damaged framework by replacing broken pieces with new material.
• Operated equipment to support worksite needs and enhance team efficiency.
• Complied with federal and company regulations to maintain high level of job site safety.
• Maintained clean, safe working environment by removing debris from job site prior to shift completion.
• Measured and marked cutting lines on wood and raw materials.
• Checked wood and other materials to assess for damaged or defective items before starting projects to accurately determine projects scales and quotes.
• Installed doors, frames and wood components following manufacturers' instructions.
• Completed tear-down of existing structures to prepare for new construction.
• Analyzed blueprints and drawings to determine structural dimensions of framework.
• Completed tear-down of existing construction to prepare for new construction.
• Cleaned job sites by clearing away carpentry debris and waste.
• Selected tools, equipment and materials from storage to transport to work site.
• Positioned and held timbers, lumber, or paneling in place for fastening or cutting.
• Applied caulk, sealants and other agents to installed surfaces.
• Fitted, cut and installed wood trim.
• Reviewed and interpreted project specifications, determining tools and equipment needed.
• Examined construction plans to identify potential structural problems.
• Mixed mortar, plaster, and grout according to standard formulas.
• Fastened timbers or lumber with glue, screws or pegs.
• Analyzed problematic installations and implemented appropriate solutions for quick remediation.
• Performed mod assembly, erected and connected structural steel and leveled and torqued connections after steel placement.
• Studied blueprints, drawings, and specifications to determine layout of work.
• Inserted additional sealing, wiring and insulating materials based on job-specific requirements.
• Operated cranes appropriately to hoist metal components into required areas.
• Aligned and connected structural components to create safe, long-lasting results.
• Positioned steel units, aligned holes and inserted temporary bolts while checking alignments and joining steel parts.
• Set up hoisting equipment to lift and place structural steel items.
• Removed and replaced existing grating and structural steel with appropriate materials.
• Fabricated steel frames, columns, beams and girders according to blueprints or instructions from supervisors.
• Supervised crew members in proper steel placement in locations. Back first-hand coring experience

• Cut openings in walls or floors to accommodate pipes and duct work.
• Installed roofing felt, shingles and siding on exterior of buildings.
• Screwed together boards for sub-flooring, walls or other construction projects.
• Read blueprints or instructions to determine the type of framing required.
• Assisted carpenters in the installation of cabinets, doors or trim moldings.
• Maintained a clean job site by disposing of all wood scraps properly.
• Inspected ceiling joists, wall studs and floor beams prior to installation.
• Checked roofs for proper alignment after installing trusses or rafters.
• Constructed stairways from pre-cut stringers and risers.
• Built scaffolding for use in constructing tall buildings.
• Framed interior wall partitions made of gypsum board or other materials.
• Repaired damaged framework by replacing broken pieces with new material.
• Erected wooden structures such as rafters, studding, joists and trusses.
• Assembled and erected forms for pouring concrete foundations, walls, columns and slabs.
• Aligned frames with plumb bobs, levels and laser equipment.
• Filled nail holes, cracks in walls or joints between panels with caulking material.
• Measured and cut lumber to specified size, using power saws and hand tools.
• Installed window frames into walls before covering them with drywall.
• Supported bricklayers by providing ladders or scaffolds when needed.
• Ensured that all building codes were met during the construction process.
• Secured timbers or lumber with nails or bolts according to blueprint specifications.
• Complied with federal and company regulations to maintain high level of job site safety.
• Operated equipment to support worksite needs and enhance team efficiency.
• Maintained clean, safe working environment by removing debris from job site prior to shift completion.
• Measured and marked cutting lines on wood and raw materials.

• Participated in physical inventories when required by counting parts, supplies, and equipment.
• Identified order discrepancies and damaged items and notified supervisor.
• Corresponded with establishment representatives to rectify damages, shortages or nonconformance to specifications.
• Organized goods according to established procedures for efficient retrieval during order fulfillment process.
• Prepared accurate shipping orders and bills of lading to direct and route materials.
• Maintained inventory of stock on hand by tracking materials received and distributed.
• Received and verified incoming shipments for accuracy of items, quantities, and condition.
• Placed products and rotated stock per established standards.
• Ensured that all safety protocols were followed at all times while working in the warehouse environment.
• Prepared documentation to track and report on damaged or missing items.
• Communicated with carrier representatives to follow specific procedures and make special delivery arrangements.
• Organized storage areas to maximize movement and minimize labor.
• Tracked expiration dates on perishable items such as food items, medications, removing outdated products from circulation.
• Obtained required documentation to process shipments and support movement.
• Checked orders against invoices to ensure accuracy before releasing them from the warehouse.
• Recorded shipment data for reporting, accounting or recordkeeping purposes.
• Maintained inventory of shipping materials and supplies. Furniture and patio equipment assembly
• Compared shipping routes or methods to determine least environmental impact.
• Adhered strictly to safety regulations while operating machinery or handling hazardous materials.
• Examined shipment contents and compare with manifests, invoices or orders to verify accuracy.
• Prepared packages for shipping and determined most economical shipping methods.
• Directed warehouse team in stocking merchandise, pulling orders and setting up loads.
• Troubleshot issues related to shipping and receiving in compliance with corporate procedures.
• Processed returns to vendors and maintained accurate records of all returned items.
• Checked items to be shipped against work orders to confirm correct quantities, destination and routing.
• Computed shipping, storage or demurrage charges using computer or price list.

• Unloading the 18 wheelers working the bulk area requirements lifting 70 lb over your head handling hazmats making sure paperwork is correct repacking damaged packages
• Prioritized and organized tasks to efficiently accomplish service goals.
• Recognized by management for providing exceptional customer service.
• Provided support and guidance to colleagues to maintain a collaborative work environment.
• Operated equipment and machinery according to safety guidelines.
• Completed day-to-day duties accurately and efficiently.
• Managed time effectively to ensure tasks were completed on schedule and deadlines were met.

I'm over your furniture into a house or out of a house

• Provided excellent service and attention to customers when face-to-face or through phone conversations.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Worked effectively in team environments to make the workplace more productive.