Jason R. Gay
Huntsville
Summary
Reliable Machinist skilled at reading and following machine schematics and standard operating procedures. Meticulous and systematic with excellent critical thinking and problem-solving abilities. Accomplished in manufacturing and repairing precision parts and instruments.
Overview
27
27
years of professional experience
Work History
CNC Machinist
National Oilwell Varco
Conroe
04.2024 - Current
- Machines Matrix bitheads on the Mori- seki 603
- Operates induction coil
- Under the direction of a supervisor and/or experienced machinist, responsible for quality parts produced on CNC machines such as, but not limited, to lathes and milling machines in a timely, safe and efficient manner.
- Operate, perform set-up changes and first article inspections on production runs utilizing CNC Machines.
- Load parts utilizing overhead lifting equipment, proving tapes, operating controls, setting offsets, simple edits, deburring and inspection of quality parts for conformance to requirements.
- Identify problems before production runs, then start and observe machine operation to detect any other malfunctions or out-of-tolerance conditions and adjust machine controls or control media as required.
- Read blueprints, precision measuring instruments and job orders to determine dimensions, tolerance and tooling requirements.
- Maintain knowledge of dimensions and tolerances for tooling instructions such as fixtures, feed rates, cutting speeds, depth of cut and cutting tools to be used.
- Prove out new programs and make simple edits of NC programs on at least one or more numerically controlled machines.
- Keep equipment and work area clean and orderly and perform basic preventative maintenance functions on equipment.
- Read, interpret, and understand information in work order, Bill of Materials and other related documentation inside the job packet.
- Perform inspection of raw material or verify part serial number before machining.
- Perform work in a safe efficient manner within established work instructions and special processes.
- Perform finish product inspections.
- Maximize yields during job and maintain high quality standard to minimize defects.
- Maintain NOV guidelines on safety, quality, and delivery.
- Clean work areas as necessary to maintain cleanliness, health, and safety standards.
- Champion facility goals for Safety, Quality, Innovation and Cost - seek opportunities to provide feedback on process improvements, cost savings, and opportunities to work more efficiently and/or safely.
- Remain open to feedback and collaboration with other departments and business units
- All other reasonable tasks assigned with the goal of helping the team, operations, or the facility overall
New Home Superintendent
S&H Custom Homes
Montgomery
02.2020 - 04.2021
- Oversee the construction process of new homes, ensuring that all work is completed on time, within budget, and to the highest quality standards
- Schedule and coordinate subcontractors, vendors, and suppliers, ensuring that work is completed according to the construction schedule and meets quality and safety requirements
- Communicating professionally with trade partners, suppliers, building officials, homeowners, and other Adams Homes team members
- Exhibiting high attention to detail and organizational skills
- Following the construction scheduling process proficiently
- Demonstrating a friendly attitude and persistent work ethic
- Visiting job sites daily to inspect quality, monitor schedules, and provide necessary guidance to ensure homes are completed on time and in accordance with our quality standards
Make ready technician
S&H Custom Homes
Montgomery
02.2018 - 01.2020
- Performed electrical, plumbing, painting, carpentry work.
CMM Programmer / Quality Control Lead Inspector
Smith Bits - A Schlumberger Company
Houston
07.2010 - 01.2018
- Write Coordinate Measuring Machine programs in PCDMIS using Pro Engineering 3D models.
- Scan in process and finished parts using Romer arm scanner with POLYWORKS software.
- Train employees to run and program Coordinate Measuring Machines using PCDMIS software.
- Receive and inspect outside vendor parts using Schlumberger procedures, engineering specifications/drawings and customer requirements.
- Inspect machined parts in accordance with API, ISO and Smith specifications.
- Perform final inspection on finished parts ensuring as built is to customer specifications.
- Verify components against Packing Slips and Certifications
- Verify components material properties Certifications against the current review of the specifications for the component as stated in the Purchase Order.
- Inspect first article parts using a Coordinate Measuring Machines.
- Perform in-house audits on manufacturing processes and generate finding reports.
- Investigate root cause for scrapped parts and/or recurring defects.
- Document defects with non- conformance reports and disposition according to engineering standards.
- Inspect machined parts from outside vendors in accordance with API, ISO, and customer requirements.
- Create certifications of conformance ensuring finished parts are built in accordance with API, ISO, and customer specifications.
Matrix Bit Specialist III
Smith International
Houston
09.2007 - 07.2010
- Operated forklift to move material from warehouse to shop floor.
- Setup and operate manual lathe for in house parts to match blueprints.
- Setup and operate Mori Seiki SL 603 CNC machine for in house parts.
- Operated Submersible-Arc welder for in house parts.
- Trained and mentored employees on the manufacturing process.
- Assisted in implementing 5S lean manufacturing processes in work areas.
- Coordinated daily job duties to employees in dept.
- Visually inspect the product for defects before moving to the next process.
- Performed Hydrostatic testing on all applicable in process parts.
- Performed Diamond grinding on/in process parts to ensure API specifications were met.
- Performed Liquid Penetrant Test on all finished parts.
- Trained new employees on safety procedures.
Inducon construction company
Houston
04.2005 - 07.2007
- Worked installing cranes
- Welding and fabrication
- Painting
- Moving and installing equipment
- Crane Installation and Operation: Proficient in installing and maintaining industrial cranes, ensuring precision and safety.
- Machinery Maintenance and Relocation: Experienced in servicing, troubleshooting, and moving heavy machinery in manufacturing settings.
- Concrete Work: Skilled in concrete pouring, finishing, and formwork for industrial construction projects.
- Heavy Equipment Handling: Adept at operating forklifts, rigging systems, and other equipment for safe machinery transport.
- Safety Compliance: Strong knowledge of OSHA regulations and workplace
- Heavy equipment
Apprentice electrician
Westpoint electrical
Tomball
03.1999 - 03.2005
- Help install wiring, conduits, and electrical panels for power distribution in buildings or industrial facilities, like the manufacturing settings you've worked in.
- Run cables and connect electrical systems for equipment, such as cranes or heavy machinery, ensuring proper power supply.
- Mount fixtures, outlets, and switches under supervision.
- Supporting Maintenance and Repairs:
- Assist in troubleshooting electrical issues in machinery or systems, similar to the machinery maintenance you've done.
- Replace or repair faulty wiring, circuit breakers, or components in industrial equipment.
- Perform routine maintenance checks on electrical systems to ensure safety and functionality.
- Reading and Interpreting Blueprints:
- Learn to read electrical schematics and construction blueprints, which aligns with your experience in industrial construction where plans are key.
- Help lay out electrical systems based on technical drawings.
- Using Tools and Equipment:
- Operate hand and power tools (e.g., drills, wire strippers, multimeters) to complete tasks, similar to the tools you've likely used in crane installation or concrete work.
- Assist with rigging or moving electrical components, leveraging your machinery-moving experience.
- Ensuring Safety and Compliance:
- Follow OSHA and National Electrical Code (NEC) standards to maintain safe work environments, a skill transferable from your industrial construction background.
- Handle materials safely and maintain clean, organized work areas.
- Learning Specialized Skills:
- Gain experience with industrial systems, such as those powering cranes or manufacturing equipment, which connects directly to your prior work.
- Assist in setting up control systems, motors, or automation equipment in facilities.
- Team Collaboration and Communication:
- Work closely with journeyman electricians, contractors, and other trades (like those in concrete or machinery work) to complete projects.
- Communicate effectively to ensure tasks are done correctly and on schedule, a soft skill you likely used in construction.
Automotive Mechanic Trainee
European Motor Works
Houston
04.1998 - 02.1999
- Worked under the direction of a master mechanic to diagnose and repair automotive systems and units.
- Demonstrated talent for quickly and accurately diagnosing mechanical failures and determining corrective actions.
- Conducted routine service and preventative maintenance.
Education
High School Diploma -
01.1995
Electrical Training
Iec Electrical Apprenticeship School
Houston, TXSkills
- Microsoft Office
- Word
- Excel
- Outlook
- Excellent written skills
- Excellent verbal skills
- Excellent organizational skills
- Blueprint reading
- Quality inspection
- Attention to detail
- Time management
References
Previous employment and references available upon request
Training Education
- NDT level II Liquid Penetrant Testing Certified
- Mag Particle Testing Certified
- Hexagon Metrology PC-DMIS for CMM 101 training
- PolyWorks version 12 Inspector Training
- Newton Group People Management Training
- Submersible-Arc Welding Certified - Lincoln L-90 & L-70
- Certified Trainer - Drill Bit Break-out, Sub-arc welding, Diameter Diamond Grinding and Painting.
- Lean Champion
- Mediation SIPP training
- IEC Electrical Apprenticeship Program
- High School Diploma - 1995
Timeline
CNC Machinist
National Oilwell Varco
04.2024 - Current
New Home Superintendent
S&H Custom Homes
02.2020 - 04.2021
Make ready technician
S&H Custom Homes
02.2018 - 01.2020
CMM Programmer / Quality Control Lead Inspector
Smith Bits - A Schlumberger Company
07.2010 - 01.2018
Matrix Bit Specialist III
Smith International
09.2007 - 07.2010
Inducon construction company
04.2005 - 07.2007
Apprentice electrician
Westpoint electrical
03.1999 - 03.2005
Automotive Mechanic Trainee
European Motor Works
04.1998 - 02.1999
High School Diploma -
Electrical Training
Iec Electrical Apprenticeship School
Similar Profiles
Khristine AriasKhristine Arias
Administrative Assistant at National Oilwell Varco, NOVAdministrative Assistant at National Oilwell Varco, NOV
Danielle RoweDanielle Rowe
Office Manager at National Oilwell Varco, LPOffice Manager at National Oilwell Varco, LP
Isai RabanalesIsai Rabanales
CNC Machinist at National Oilwell Varco IncCNC Machinist at National Oilwell Varco Inc
BRET L. CAMPBELLBRET L. CAMPBELL
IT Security Systems Administrator at National Oilwell VarcoIT Security Systems Administrator at National Oilwell Varco
Mary MuthoniMary Muthoni
CNA at Creative SolutionCNA at Creative Solution