Jay Roberts
Destrehan,LA
Summary
Obtain a position with a leading Aircraft maintenance facility, repair station or corporate carrier, where my knowledge, enthusiasm and training will facilitate company growth and safety achievement.
Overview
36
36
years of professional experience
Work History
AMT FLIGHTLINE AIRCRAFT MECHANIC
Delta Air Lines, Inc
07.2019 - Current
- Increased aircraft reliability by performing thorough inspections, diagnosing issues, and repairing or replacing necessary components.
- Maintained safety standards by adhering to FAA regulations and company policies during routine maintenance and repairs.
- Reduced downtime for aircraft by efficiently completing scheduled maintenance tasks within allotted timeframes.
- Collaborated with team members on complex repairs, ensuring successful completion of projects and minimizing delays in aircraft availability.
- Supported operational readiness by conducting comprehensive pre-flight and post-flight inspections to ensure proper functioning of aircraft systems.
- Contributed to cost-saving initiatives by identifying opportunities for process improvements in maintenance procedures.
- Assisted colleagues with technical guidance as needed, fostering a collaborative environment focused on shared success.
- Addressed emergency repair situations promptly, mitigating potential hazards and ensuring minimal disruption to flight schedules.
- Performed aircraft maintenance for scheduled preventive actions and unscheduled requirements.
- Maintained repair logs to document all corrective and preventive aircraft maintenance.
- Recorded maintenance actions in aircraft logbooks.
- Removed and installed aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, and mechanical flight controls.
- Troubleshot mechanical, hydraulic, pneumatic and electrical systems and tested equipment following repairs.
- Meticulously documented repair procedures for future reference, contributing to the improvement of overall team efficiency.
AMT AIRCRAFT MECHANIC
DELTA GLOBAL STAFFING
07.2018 - 02.2019
- Improved vehicle performance by conducting thorough inspections and identifying necessary repairs.
- Reduced downtime for clients by efficiently completing maintenance tasks and repairs on time.
- Enhanced customer satisfaction with prompt diagnosis and resolution of complex mechanical issues.
- Collaborated with team members to complete large-scale projects, ensuring timely completion and high-quality workmanship.
- Streamlined repair processes by maintaining a well-organized and clean workspace, contributing to increased productivity.
- Consistently met or exceeded company performance metrics through diligent work ethic and attention to detail in all repair tasks.
- Mentored junior mechanics in proper diagnostic techniques, tool usage, and workplace safety practices to foster their growth within the company.
- Reduced downtime for aircraft by efficiently completing scheduled maintenance tasks within allotted timeframes.
- Increased aircraft reliability by performing thorough inspections, diagnosing issues, and repairing or replacing necessary components.
- Maintained safety standards by adhering to FAA regulations and company policies during routine maintenance and repairs.
- Collaborated with team members on complex repairs, ensuring successful completion of projects and minimizing delays in aircraft availability.
- Enhanced troubleshooting skills through continuous learning and professional development, staying up-to-date with industry advancements and best practices.
- Supported operational readiness by conducting comprehensive pre-flight and post-flight inspections to ensure proper functioning of aircraft systems.
- Assisted colleagues with technical guidance as needed, fostering a collaborative environment focused on shared success.
- Meticulously documented repair procedures for future reference, contributing to the improvement of overall team efficiency.
AMT / FLIGHTLINE MECHANIC
EXPRESSJET AIRLINES INC
05.2018 - 07.2018
AMT / FLIGHTLINE MECHANIC
JDM AVIATION
05.2013 - 04.2018
- Perform E.O work cards such as inspection of gear door and up locks, removed if found damage, and replace the component
- Check tension after inspection. - Follow torque given values to each nuts with specific torque wrenches in accordance with aircraft maintenance manuals - Bombardier CRJ 700 - BTR Maintenance Facility - Rigging flight controls - Remove and replace starter generator, oil service & filter, fuel filter - Service oil and hydraulic fluid - Service tires and strut - Perform pre- and post-flight ops check - Taxing aircraft - Brake service - Flight Line mechanic - Service oxygen tanks - Ground power unit (GPU) - General Aviation - Defuel and refuel aircraft - Service and Line checks - Remove and replace MLG/NLG - Remove and Replace APU 1st Stage - Download and Upload FUQUA - Reset IDG after performed engine run. - Disassemble, assemble, install, and connect parts, fittings, and assemblies on aircraft, using layout tools, hand tools, power tools, and fasteners such as bolts, screws, rivets, and clamps. - Removed and reinstalled after inspections performed all panels from wing to body fuselage, slats, and rudder - Dassault Falcon 50 - Fuel Service Supervisor - Read and interpret blueprints, illustrations, and specifications to determine layout, sequences of operations, or identities and relationships of parts. - Disassemble, assemble, install, and connect parts, fittings, and assemblies on aircraft, using layout tools, hand tools, power tools, and fasteners such as bolts, screws, rivets, and clamps. - Cut, trim, file, bend, and smooth parts and verify sizes and fitting tolerances in to ensure proper fit and clearance of parts. - Adjust, repair, rework, or replace components if required. - Clean, oil, or coat (lubricated) system components and all NLG and MLG. - Install mechanical linkages, actuators, and verify tension cables and temperatures using tension meters. - Removed and reinstalled after inspections performed all panels from wing to body fuselage, slats, and rudder. - Assisted and performed flight controls rigging with the crew. - Assisted and performed landing gear changes with the crew. - Perform FOD walk daily and clean as you go policies. - Perform E.O work cards such as inspection of gear door and up locks, removed if found damage, and replace the component
- Check tension after inspection.
ROV TECHNICIAN
OCEANEERING INTERNATIONAL INC
05.2012 - 11.2012
COMMERICAL DIVER/TENDER, DMT AND IMCA, ADC LIFE SUPPORT TECHNICIAN
CHET MORRISON CONTRACTORS, LLC
12.2008 - 03.2012
DIVING INSTRUCTOR TRAINER
CDA TECHNICAL INSTITUTE
07.2005 - 08.2008
DIVING AND FIRST AID/CPR INSTRUCTOR
GUAM TROPICAL DIVE STATION
07.2003 - 04.2005
DIVING INSTRUCTOR
KONA COAST DIVERS
05.2002 - 06.2003
OWNER/OPERATOR
SELKIRK MASONRY
08.1999 - 11.2000
62ECO HEAVY EQUIPMENT OPERATOR, COMBAT ENGINEER
IDAHO ARMY NATIONAL GUARD
08.1987 - 11.1991
Education
Advanced Diver Medic -
NATIONAL BOARD OF DIVING & HYPERBARIC MEDICAL TECHNOLOGY
Air / Mixed Gas Commercial Diver -
COMMERCIAL DIVING ACADEMY
NDT Specialist -
BLACKSMITH MARINE CORPORATION
Emergency First Aid, Life Support, and Diving Operations -
Various CON-ED
English101 and Intro to CR101 -
BOISE STATE UNIVERSITY
Advanced Pro Art & Design W/CPU Graphics -
PHEONIX INSTITUTE OF TECHNOLOGY
12.1991
Skills
- FAA A&P Mechanic
- Boeing 737 NG engine run qualified
- Boeing 737 initial and ETOPS
- Boeing 757 engine run qualified
- Boeing 757 initial and ETOPS
- Airbus 319-320-321-321 NERO initial
- Commercial Deep Sea Diver/Tender
- DMT Offshore Dive Paramedic
- Life Support Technician (LST)
- First Aid and CPR Instructor
- PADI Master Scuba Instructor
- NAUI Scuba Instructor Trainer
- Welder- mig, tig, arc and plasma cutting
- Heavy Equipment Operator, dozer, scrapper, grader and front-end loader
References
References and letters of recommendation available upon request
Timeline
AMT FLIGHTLINE AIRCRAFT MECHANIC
Delta Air Lines, Inc
07.2019 - Current
AMT AIRCRAFT MECHANIC
DELTA GLOBAL STAFFING
07.2018 - 02.2019
AMT / FLIGHTLINE MECHANIC
EXPRESSJET AIRLINES INC
05.2018 - 07.2018
AMT / FLIGHTLINE MECHANIC
JDM AVIATION
05.2013 - 04.2018
ROV TECHNICIAN
OCEANEERING INTERNATIONAL INC
05.2012 - 11.2012
COMMERICAL DIVER/TENDER, DMT AND IMCA, ADC LIFE SUPPORT TECHNICIAN
CHET MORRISON CONTRACTORS, LLC
12.2008 - 03.2012
DIVING INSTRUCTOR TRAINER
CDA TECHNICAL INSTITUTE
07.2005 - 08.2008
DIVING AND FIRST AID/CPR INSTRUCTOR
GUAM TROPICAL DIVE STATION
07.2003 - 04.2005
DIVING INSTRUCTOR
KONA COAST DIVERS
05.2002 - 06.2003
OWNER/OPERATOR
SELKIRK MASONRY
08.1999 - 11.2000
62ECO HEAVY EQUIPMENT OPERATOR, COMBAT ENGINEER
IDAHO ARMY NATIONAL GUARD
08.1987 - 11.1991
Advanced Diver Medic -
NATIONAL BOARD OF DIVING & HYPERBARIC MEDICAL TECHNOLOGY
Air / Mixed Gas Commercial Diver -
COMMERCIAL DIVING ACADEMY
NDT Specialist -
BLACKSMITH MARINE CORPORATION
Emergency First Aid, Life Support, and Diving Operations -
Various CON-ED
English101 and Intro to CR101 -
BOISE STATE UNIVERSITY
Advanced Pro Art & Design W/CPU Graphics -
PHEONIX INSTITUTE OF TECHNOLOGY
Similar Profiles
Robert SixtaRobert Sixta
First Officer at Delta Air Lines - Endeavor AirFirst Officer at Delta Air Lines - Endeavor Air
Mercadez HazelwoodMercadez Hazelwood
Team Lead, Customer Experience Supervisor at Delta Air LinesTeam Lead, Customer Experience Supervisor at Delta Air Lines
Carissa YinmedCarissa Yinmed
Agent at Delta Air Lines, IncAgent at Delta Air Lines, Inc
Paige MoorePaige Moore
Passenger Service Agent at Delta Air Lines, Inc.Passenger Service Agent at Delta Air Lines, Inc.
Natasha WashingtonNatasha Washington
Receptionist Administrator at SSM ManagementReceptionist Administrator at SSM Management