I am an hard working, self motivated individual, working to to achieve my goals.
Hi, I’m
Jason Stevens
Summary
Overview
20
years of professional experience
Work History
Self Employed
Driver/Land Lord
01.2020 - Current
Job overview
- Dumped recyclable materials and discarded refuse at appropriate disposal sites.
- Crushed refuse and garbage when appropriate.
- Communicated with dispatchers regarding delays, unsafe sites and equipment breakdowns.
- Operated automated and semi-automated hoisting devices to raise bins and dump garbage into vehicle.
Faraday Future
Sr. Auto Tech
10.2021 - 04.2022
Job overview
- Tested vehicle components and systems to identify issues.
- Performed diagnostic and troubleshooting procedures to find and identify root causes of mechanical issues.
- Troubleshot and diagnosed faults with vehicle systems and components using OEM-specific code readers, diagnostic trees and online knowledge bases.
- Completed customer orders and warranty services according to manufacturer specifications.
- Completed full vehicle inspections to check for leaks, damage or other issues of concern.
- Replaced damaged, missing or defective parts with new and refurbished components.
- Inspected and tested vehicles and completed preventive maintenance such as engine tune-ups, oil changes, tire rotations, wheel balancing and filter replacement.
Procter & Gamble Co
Preventative Maintenance Technician
07.2021 - 10.2021
Job overview
- Followed instructions from supervisor regarding daily job tasks and duties.
- Positively engaged with customers and maintained professional appearance as company representative.
- Continuously adhered to strict regulations as well as detailed instructions, guidelines and specifications.
- Executed tasks within time and budget constraints.
- Safely and effectively handled wide range of cleaning products and solutions.
- Reported issues to property manager so effective resolutions could be put into place.
- Optimized work readiness with effective gathering of parts and supplies in alignment with specifications.
- Removed trash and recyclables at end of each shift and disposed of items in proper receptacles.
- Produced parts and assemblies quickly and efficiently within tolerances.
XOS
Battery Technician
02.2021 - 05.2021
Job overview
- Test drove vehicles to determine problems and test repairs.
- Changed vehicle oil and replaced filter.
- Checked brake systems and determined need of pad replacement, disc turning or other maintenance requirements.
- Assessed vehicle maintenance status and completed needed service.
- Communicated issues to supervisor and helped develop solutions.
- Read and followed technical documentation to complete accurate repairs.
- Inspected completed repairs to check for accuracy and functionality and maintain customer satisfaction.
- Corrected faults and maximized performance by rebuilding systems and individual components.
PHOTON Automation
Production Manager
07.2020 - 01.2021
Job overview
- Resolved issues quickly to maintain productivity goals.
- Managed continuous improvement initiatives to drive gains in quality, flow and output.
- Reviewed work for quality and compliance with company standards and design specifications.
- Standardized production procedures, job roles and quality assurance guidelines.
- Assessed manufacturing processes and recommended improvements to increase productivity.
- Addressed personnel issues and scheduling conflicts promptly.
- Directed key personnel in correct production techniques to achieve required quality.
- Sourced materials to keep up with production goals and meet customer demands.
- Created streamlined production schedules and collaborated with production employees to communicate objectives and goals.
- Directed manufacturing process and procedures to achieve goal of first run capability.
- Implemented quality improvement changes to minimize product defect rates.
- Determined suitable crew requirements, scheduled employees and worked with Human Resources to meet changing production schedules.
- Applied lean practices to balance workflow and eliminate unnecessary steps.
- Created and regularly updated department work instructions and reports.
- Implemented program changes to identify and quickly resolve root cause issues bottlenecking production levels.
Ravin
New Model Launch Leader
04.2018 - 07.2020
Job overview
- Assessed operant systems for efficiency and functionality, providing written suggestions on enhancements needed to meet operational goals.
- Designed technical upgrade paths, incorporating requested functionality and performance enhancements.
- Liaised with finance department to collaboratively design budgets incorporating operational needs and monetary goals.
- Authored customized user manuals for specific system configurations, tailoring content to unique employee skill profiles.
- Oversaw quality assurance (QA) testing on new [Software] and [System] installations.
- Monitored and evaluated performance of [Type] systems, increasing overall uptime by [Number]% via [Task].
- Researched and acquired new [Type] hardware to maximize system functionality and meet required performance metrics.
- Provided training to end-users in [Type] Industry, offering education via in-person and online courses.
- Drafted analyses of new and emerging [Type] technologies, recommending [Action] where appropriate.
- Led technical reviews to check code quality and compliance with standards.
- Gathered, defined and communicated requirements for each module.
- Resolved issues efficiently using [Skill] and [Skill] and escalated [Type] problem to appropriate personnel.
- Reviewed module code and troubleshot problems.
- Maintained good balance between customer needs, time constraints and development potential.
- Made sure that products were produced on time and are of good quality.
- Maintained organized work area by cleaning and removing hazards.
- Inspected finished products for quality and adherence to customer specifications.
- Inspected products and machines to maintain quality and efficiency.
- Examined incoming materials and compared to documentation for accuracy and quality.
- Assembled [Type] products according to changing daily work orders and specific customer needs.
- Performed general equipment maintenance and repair to minimize downtime.
- Prepared reports and technical documentation of day-to-day production processes.
- Monitored employee actions for adherence to safety procedures.
- Calibrated machines to maintain required productivity levels and adherence to quality standards.
- Tested products or subassemblies for functionality or quality and troubleshot problems with equipment, devices or products.
- Reviewed production schedules and streamlined processes.
- Oversaw logistics and inventory management for storeroom.
- Implemented updated operating procedures for [Type] machine and adjusted use to increase productivity and longevity.
- Adjusted alignment of drills, guides and holding devices.
- Assembled parts and components using [Type] welding techniques.
- Employed [Type] welding techniques to assemble parts and components.
- Drilled floors, hung plywood and applied [Product] to achieve production requirements.
A.M. General
Automotive Technician Team Leader
02.2004 - 08.2017
Job overview
- Organized work to meet demanding production goals.
- Maintained quality assurance and customer satisfaction objectives.
- Executed diagnostics, troubleshooting and evaluations on [Equipment].
- Completed job reports and logs immediately following service calls.
- Read manuals and manufacturer instructions to install and troubleshoot devices.
- Conducted tests of components and systems to evaluate performance and identify concerns.
- Performed routine maintenance on [Equipment] for manufacturing operations.
- Performed complex mechanical alignments and calibration of equipment to quality standards.
- Utilized control mechanisms and hands-on procedures to operate machines.
- Managed team performance by training, mentoring, disciplining and motivating employees.
- Determined maintenance requirements and assigned repairs to qualified employees.
- Planned, scheduled and delegated daily work to team of employees.
- Kept work consistently compliant with 5S standards.
Education
Ivy Tech Community College of IndianaSouth Bend, IN
No Degree from Automotive Technology
University Overview
Kalamazoo Valley Community CollegeKalamazoo, MI
No Degree from Electrical, Electronics Engineering Technologies
University Overview
Three Rivers High SchoolThree Rivers, MI
High School Diploma
04.1994
University Overview
Timeline
Sr. Auto Tech
Faraday Future
10.2021 - 04.2022
Preventative Maintenance Technician
Procter & Gamble Co
07.2021 - 10.2021
Battery Technician
XOS
02.2021 - 05.2021
Production Manager
PHOTON Automation
07.2020 - 01.2021
Driver/Land Lord
Self Employed
01.2020 - Current
New Model Launch Leader
Ravin
04.2018 - 07.2020
Automotive Technician Team Leader
A.M. General
02.2004 - 08.2017
Ivy Tech Community College of Indiana
No Degree from Automotive Technology
Kalamazoo Valley Community College
No Degree from Electrical, Electronics Engineering Technologies
Three Rivers High School
High School Diploma
Quote
Judge a man by his questions rather than his answers.
Similar Profiles
DONNA MITCHELLDONNA MITCHELL
Support Worker at Self EmployedSupport Worker at Self Employed
Dale McBrideDale McBride
Vintage Reseller at Self EmployedVintage Reseller at Self Employed
Mounaguru VisuvalingamMounaguru Visuvalingam
Technician at self employedTechnician at self employed
Brayan Ruiz BarrazaBrayan Ruiz Barraza
Machine Operator/General Laborer at Self EmployedMachine Operator/General Laborer at Self Employed
Armando TrevinoArmando Trevino
Land Lord / General Contractor at Family OwnedLand Lord / General Contractor at Family Owned