JAVIER ALFONSO BACA VENGOECHEA

LOWER LOBE

• Drill and install P-Ring 1582
• Drill and install frame 1605 to 1725
• Drill and install bracket 1605 to 1725
• Drill and install longeron
• Drill and install boom c/t skin
• Drill and install hoist support intercostal
• Drill and install system provisional
• Drill and install laircom
• Drill and install Fwd system support
• Install T-forks sta 1582 and 1725
• Drill instercostal sta 1605-1629
• Drill and install pulley support brakets
• Drill and install bracket 1809
• Drill and install service door
• Drill and install platfrom
• install plug k-holes
• Drill and install tail skid

UPPER LOBE

• Drill and install P-Ring 1582
• Drill and install frame 1605 to 1725
• Drill and install bracket 1605 to 1725
• Drill and install longeron
• Install T-forks sta 1582 and 1725
• Drill and install system support provisional
• Drill and install frame stabelizer
• Drill and install Skin join fwd
• Drill and install rudder fairing
• Drill and install fairing skin
• Drill and install M.E
• Drill and install Str 12
• Drill and install brackets wire
• Drill and install intercostal
• Install fin access door
• Install plug k-holes
• Install provisio system support

CLAMSHELL

• Drill and install frame 1725 to 1809
• Drill and install longeron
• Drill and install Aft skin
• Install t-forks 1725 and 1809
• Install M.E
• Drill and install strut
• Drill and install snubber
• Drill and install bump stop
• Drill and install canted frame
• Drill and install hoist cable roller

GENERAL

• Interpreted technical drawings to ensure accurate part specifications.
• Assembled complex structures by welding and fastening metal pieces together.
• Assembled sheet metal parts with screws, bolts or spot welds.
• Assisted in training new employees in the use of shop tools and equipment safely.
• Interpreted blueprints to determine dimensions of the finished product.
• Inspected existing systems to identify maintenance needs and plan skilled repairs.

• Executed drilling operations for B737-400 and 800 pre-assembly cargo door modifications.
  Performed pilot hole drilling on lower beam and machining of latch plate holes.
  Machined cutouts in tee for floor beam and installed splice plates with precise angle location.
  Drilled and countersunk upper jambs according to specifications from drawings.
  Secured frames and conducted drilling in accordance with design drawings.
• Fabricated sheet metal components using precision tools and equipment.
• Interpreted technical drawings to ensure accurate part specifications.
• Operated CNC machines for cutting and shaping metal materials.
• Assembled complex structures by welding and fastening metal pieces together.
• Fabricated sheet metal components using shears, brakes, punches and drill presses.
• Assembled sheet metal parts with screws, bolts or spot welds.
• Assisted in training new employees in the use of shop tools and equipment safely.
• Interpreted blueprints to determine dimensions of the finished product.

• perform multiple kind of work in the global 7500
• remove and drill and replace outboard upper skin on final line.
• Remove and replace rib 22 and 2 on final line
• Remove and replace pressure wall on final line
• Freeze plug installation.
• Assembly on upper and lower skins for global 7500
• Assembly on forward and rear spars
• Drilling on aluminum, titanium, and stainless steel.
• Perform work with blueprint and engineer drawings
• Drilling bracket and installing refuel defuel lines also
• electrical bonds to measured meet the reqmts per applicable document.
• Install fuel transfer tubes, CG pump and valve.
• Install fuel vent tubes, on bay 2
• Actuator’s installation, MFS1, MFS2, and MFS3.
• Performed inspections on aircraft structures to ensure compliance with safety standards.
• Assembled and repaired aircraft components using specialized tools and equipment.
• Collaborated with engineers to interpret technical drawings and specifications.
• Assisted in troubleshooting structural issues to maintain aircraft integrity.
• Inspected, repaired and replaced structural parts of aircrafts using power tools and hand tools.
• Installed electrical components in accordance with applicable standards and regulations.
• Cleaned work areas after completing repairs and installations.