JEFF WESTLEY
Janesville,USA
Summary
Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.
Overview
14
14
years of professional experience
Work History
Self Employed
Janesville, Ca
05.2022 - Current
- I have experience working on alternators, brake drums, brakes lines, brake systems, combustion powered generators, control boxes, fan belts, flushing radiators, fuel injections systems, fuel pumps, fuel tanks, governors, heaters, hubs, hydraulic cylinders, hydraulic motors, hydraulic tanks, injector nozzles, injector's pumps, master cylinders, radiators, starters, track idler arms, track tensioners, various electrical systems, water pumps and hoses, wire harnesses, replacing bearings, oil seals, and idler arms when required.
- I have repaired and or replaces brakes, cooling, drive train components, electrical fuses, fuel, hydraulic, and steering.
- Aware of the makeup, operation, and installation of assemblies and systems of vehicles such as engines, front-end/rear-end assemblies, steering/braking mechanism, and transmissions.
- I can detect faulty items, determine causes of malfunctions and determine best repair methods.
- Experience with drive assemblies including converters, differential, dual axles, power dividers, as well as, planetary gears, and multi-gear ranges.
- I have used material safety data sheets, technical manuals, reviewed safety standards well working on and maintain equipment.
- I perform daily inspections, conduct preventive maintenance on vehicles and equipment, utilization of all mechanic tools, troubleshooting, overhauling on a range of diesel, multi-fuel systems, and gasoline engines to include supercharged and turbo charged engines with automatic and manual transmissions and gear reduction systems.
- I perform various operational tests using tools such as amp meters, brake testing equipment, calipers, capacity testers, circuit testers to correct faulty wiring, performing minor tune-up, removing and replacing batteries.
- I have replaced carburetors, fuel pumps, starters, voltage regulators, straps, lights, fittings, gaskets, and seals.
- I have expert knowledge of metric and standard wrench sizes and nut/bolt sizes.
- I am knowledgeable about preserving when it comes to diesel, gasoline, or multifuel vehicle engines, pumps and generators with starting equipment for processing purposes and the ability to select and apply preservatives to parts and surfaces including loose metal items, bearings, engines, and fuel tanks.
- I am skilled in disassembling mechanical items, removing, fuel tanks, air cleaners, carburetors, fuel pumps, and starters.
- Experience repairing, mounting, and dismounting split rims, repair patches and plugs.
- I have the skill to use simple tire balancing machine, tire mounting machine, and other hand tools.
- I can expertly interrupt drawings, specifications, work orders, technical manuals, and other technical publications serving as guidelines.
- I can work from oral or written instructions clutch pilot, coil testers compression gauges, air compressor, dial indicators, dial gauges, diode and transistor testers, dwell meters, dynamometer, electric drills, engine analyzers, exhaust analyzers, feeler gauges, frequency meters, fuel injector testers, gear pullers, grinders, grease guns, hydrometers, pneumatic impact, wrenches, injector testers, ignition timers, pressure leak detector/ meter, load banks, micrometers, multi-meters, phase meters, ohmmeters, oscilloscopes, porta power, ratchets, air ratchets, screwdrivers, sledge hammers, soldering irons, sockets, voltage meter, tachometers, timing belts, timing lights, torque wrenches, vacuum/fuel pump testers, wheel adjusting gauges, etc.
- I can tear down, reassemble, completely disassemble and tune up of air cooled and liquid cooled engine, cam shaft replacements, crank shaft/bearing replacements, valve grinding, piston/ring replacement, checking the operation of carburetors, differentials, distributors, gaskets, generators, injectors, manifolds, spark plugs, starters, suspension arms, stabilizer bars, and transmissions.
- I have experience with adjusting bearings, idler wheels, oil seals, performing minor repairs on brake lines, shoes, and wheel cylinders, wiring harnesses and running lights, removes or unclogging and replacing fuel lines.
- I have installed bearings, cylinders, gears, pistons/rings, and valves to clearances that are specified in manuals or instructions.
- I perform oil changes with preservative oil PE 15-40w, anti-freeze, and gear oil 80-90w.
- I have used material safety data sheets, technical manuals, reviewed safety standards to ensure proper operation and hazards of petroleum products to maintain equipment.
Commercial Fishing Vessel Deckhand
Alaskan Leader Fisheries
Dutch Harbor, Ak
01.2012 - 03.2022
- As a deckhand on a commercial fishing vessel safety is number one priority on and off the ship. I've helped enhanced safety standards by utilized Personal Protection Equipment (PPE) assuring the ship has proper lifesaving equipment, lifejackets, life rafts, immersion suits, first aid kits, and flares.
- Utilized proper lifting techniques, conducting preventative maintenance checks and services in compliance with the equipment's technical manuals, maintenance charts, parts manuals and PMCS checklists on different types of machinery and tooling, pallet jacks, 6k - 15k gas/diesel/electric powered forklifts, dip nets, lines, bowie's, cutting, banding and sealing equipment.
- If needed I complete and attached inspection tags to items classified as unserviceable, repairable, or condemned.
- I've been trained on, job hazard analysis (JHA), and standard operating procedures (SOP) that involve manufacturers repair manuals, technical manuals, schematics and computer printouts.
- I have also been trained and safely utilized a variety of hand tools and equipment, hammers, hatchets, saws, screwdrivers, drills, knifes, and box knife to disassemble equipment or to process/clean fish always utilizing Personal Protection Equipment (PPE) and adhered to all safety and housekeeping policies and regulations well working diligently to maintain the highest standard of safety and producing an above standard product to the customer.
- Ensured a clean and organized work environment when sorting, storing/packing and preserving fish and fishing equipment by regularly cleaning decks and storing equipment.
- Properly disposing of waste and hazardous waste in accordance with Federal, State regulations. Ensures all hazardous waste containers are properly marked.
- Ensure that safety data sheets (SDS) are available to be reviewed by all workers and that all local, state and federal regulations are followed in the handling of hazardous waste.
- Participated in emergency drills to maintain crew preparedness for potential emergencies or hazards on board the ship, on the docks or in a warehouse setting.
- I can work with little or no supervision for any given task. I can work in tiring and uncomfortable positions for extended periods of time and positions that include frequent bending, stretching, climbing, and crouching.
- Working on top of, underneath or in cramped environments, whether it be standing, lying, or sitting. Worked both indoors and out, in difficult environments of changing temperatures, loud noises, mud, snow, wet, ice, dust, dirt, oil, and grease.
- Ability to move 50+ pounds manually, or with assistance from fellow employees, jacks, hoists, cranes or forklifts.
- I've safely operated forklifts, diesel/gas/electric powered (6K-15K), in a warehouse setting or on paved and unpaved surfaces, loading and unloading, transporting, stacking and unstacking bulky and unusual shaped cargo, palletized boxes and crates in confined and open spaces.
- Able to select and operate the proper equipment, i.e., truck, forklift, tractor, pallet jack, to efficiently and safely perform the required task, while utilizing ground guides to operate safely.
- Assisted in navigating the ship/vessel during difficult weather conditions for safer operations at sea.
- Operated motor vehicles up to 26,000 pounds six tires or more to transport equipment, materials, and supplies to and from work areas.
- Took weight distribution into consideration while loading materials to minimizing shifting and potential damage to products and materials.
- I have been trained in a wide variety of preservation and packing of bulk supplies, materials, and equipment while determining the best methods of packing and preservation, banding, heat sealing, vacuum sealing, shrink-wrap, applying preservative by dipping, brushing, flushing, or spraying parts.
- Inspects items to ensure that cleaning, drying, and preservatives have been properly applied to help keep the ship's cargo and tooling from rusting or being damaged at sea or during transport by truck, cargo ship or aircraft.
- I have selected packing materials, protective cushioning, blocking or bracing requirements based on such factors as size, shape, weight or method of transportation.
- I've packed containers by nailing/banding/sealing and shrink-wrapping materials and equipment packed in containers securing them, to minimize movement during transportation ensuring items shipped were not damaged following policy and procedures and that all shipping standards have been met.
- I've Prepared and processed all documentation, special handling labels, shipping codes, stenciled/label equipment and containers, ensuring that items marked can be accurately identified, stored or shipped to its proper destination.
Timeline
Self Employed
05.2022 - Current
Commercial Fishing Vessel Deckhand
Alaskan Leader Fisheries
01.2012 - 03.2022
Similar Profiles
MARGOT CLAIRMARGOT CLAIR
Medical Translator | English to French at Self EmployedMedical Translator | English to French at Self Employed
GRAEME GALLAGHERGRAEME GALLAGHER
Panelbeater and Spraypainter, Cowley's Hire at Self EmployedPanelbeater and Spraypainter, Cowley's Hire at Self Employed
Felicia GudinoFelicia Gudino
CNA, HHA, MA Hospice Nursing Assistant and Caregiver at Self employedCNA, HHA, MA Hospice Nursing Assistant and Caregiver at Self employed
Dylan AndersonDylan Anderson
Professional Gaming Coach at self employedProfessional Gaming Coach at self employed
Lisa PiersonLisa Pierson
Payroll Supervisor/Accountant at St. Peter Public Schools #508Payroll Supervisor/Accountant at St. Peter Public Schools #508