Summary
Overview
Work History
Education
Skills
Certification
Other
Timeline
Generic

JEFFREY TELLIS

Madison ,Alabama

Summary

To obtain employment in the rewarding field of Avionics Technology which would allow me to thoroughly utilize the specialized knowledge, skills, and abilities I have obtained through education, training and avionics-related job experience while contributing to the growth of the company and being a valuable asset to my employer.

Overview

20
20
years of professional experience
1
1
Certification

Work History

Avionics Technician

Ace Aeronautics
03.2024 - Current
  • Remove and reinstall aircraft Subsystem assemblies and components such as all avionics and control boxes for all electrical flight control, communication and navigation systems
  • Safely prepare aircraft for inspections and maintenance checks and services
  • Perform scheduled inspections and assist in performing special inspections
  • Perform operational checks and diagnoses and troubleshooting of aircraft systems using special tools and test equipment to perform functional and continuity test of electrical and electronic systems
  • Use and perform operator maintenance and special tools and aircraft ground support equipment
  • Apply comprehensive technical avionic/electrician expertise to solve complex to moderate problems by interpreting technical documentation such as aircraft technical manuals, test manuals to include maintenance information and other technical guidance provided
  • Interpret test results to diagnose malfunctions, and adjusts, repairs, or replaces defective parts
  • Inspect and repair aircraft wiring
  • Inspect test and repair aircraft’s full pitot system and components
  • Apply technical knowledge of power plant systems in determining equipment malfunctions and required expertise in restoring equipment to operating condition and operation
  • Participate in maintenance test flight and operation checks as required by technical manuals
  • Install electrical and electronic parts, assemblies, systems, and equipment in aircraft, according to specific technical manuals, wiring diagrams, and other specifications, using hand tools and power tools
  • Prioritize workloads to maintain maintenance sc heduRemove and reinstall aircraft Subsystem assemblies and components such as all avionics and control boxes for all electrical flight control, communication and navigation systems
  • Safely prepare aircraft for inspections and maintenance checks and services
  • Perform scheduled inspections and assist in performing special inspections
  • Perform operational checks and diagnoses and troubleshooting of aircraft systems using special tools and test equipment to perform functional and continuity test of electrical and electronic systems
  • Use and perform operator maintenance and special tools and aircraft ground support equipment
  • Apply comprehensive technical avionic/electrician expertise to solve complex to moderate problems by interpreting technical documentation such as aircraft technical manuals, test manuals to include maintenance information and other technical guidance provided
  • Interpret test results to diagnose malfunctions, and adjusts, repairs, or replaces defective parts
  • Inspect and repair aircraft wiring
  • Inspect test and repair aircraft’s full pitot system and components
  • Apply technical knowledge of power plant systems in determining equipment malfunctions and required expertise in restoring equipment to operating condition and operation
  • Participate in maintenance test flight and operation checks as required by technical manuals
  • Install electrical and electronic parts, assemblies, systems, and equipment in aircraft, according to specific technical manuals, wiring diagrams, and other specifications, using hand tools and power tools
  • Prioritize workloads to maintain maintenance schedules on assigned projects schedule for aircraft
  • Follow all established safety guidelines and regulations
  • Perform other duties as required
  • Les on assigned projects schedule for aircraft
  • Follow all established safety guidelines and regulations
  • Perform other duties as required.

Avionics Technician

UC, Yulista Integrated Solutions LLC
01.2020 - 04.2020
  • Remove and reinstall aircraft Subsystem assemblies and components such as all avionics and control boxes for all electrical flight control, communication and navigation systems
  • Safely prepare aircraft for inspections and maintenance checks and services
  • Perform scheduled inspections and assist in performing special inspections
  • Perform operational checks and diagnoses and troubleshooting of aircraft systems using special tools and test equipment to perform functional and continuity test of electrical and electronic systems
  • Use and perform operator maintenance and special tools and aircraft ground support equipment
  • Apply comprehensive technical avionic/electrician expertise to solve complex to moderate problems by interpreting technical documentation such as aircraft technical manuals, test manuals to include maintenance information and other technical guidance provided
  • Interpret test results to diagnose malfunctions, and adjusts, repairs, or replaces defective parts
  • Inspect and repair aircraft wiring
  • Inspect test and repair aircraft’s full pitot system and components
  • Apply technical knowledge of power plant systems in determining equipment malfunctions and required expertise in restoring equipment to operating condition and operation
  • Participate in maintenance test flight and operation checks as required by technical manuals
  • Install electrical and electronic parts, assemblies, systems, and equipment in aircraft, according to specific technical manuals, wiring diagrams, and other specifications, using hand tools and power tools
  • Prioritize workloads to maintain maintenance sc heduRemove and reinstall aircraft Subsystem assemblies and components such as all avionics and control boxes for all electrical flight control, communication and navigation systems
  • Safely prepare aircraft for inspections and maintenance checks and services
  • Perform scheduled inspections and assist in performing special inspections
  • Perform operational checks and diagnoses and troubleshooting of aircraft systems using special tools and test equipment to perform functional and continuity test of electrical and electronic systems
  • Use and perform operator maintenance and special tools and aircraft ground support equipment
  • Apply comprehensive technical avionic/electrician expertise to solve complex to moderate problems by interpreting technical documentation such as aircraft technical manuals, test manuals to include maintenance information and other technical guidance provided
  • Interpret test results to diagnose malfunctions, and adjusts, repairs, or replaces defective parts
  • Inspect and repair aircraft wiring
  • Inspect test and repair aircraft’s full pitot system and components
  • Apply technical knowledge of power plant systems in determining equipment malfunctions and required expertise in restoring equipment to operating condition and operation
  • Participate in maintenance test flight and operation checks as required by technical manuals
  • Install electrical and electronic parts, assemblies, systems, and equipment in aircraft, according to specific technical manuals, wiring diagrams, and other specifications, using hand tools and power tools
  • Prioritize workloads to maintain maintenance schedules on assigned projects schedule for aircraft
  • Follow all established safety guidelines and regulations
  • Perform other duties as required
  • Les on assigned projects schedule for aircraft
  • Follow all established safety guidelines and regulations
  • Perform other duties as required.

Avionics Technician

CH, Science and Engineering Services, SES, LLC
11.2017 - 11.2019
  • Remove and reinstall aircraft Subsystem assemblies and components such as all avionics and control boxes for all electrical flight control, communication and navigation systems
  • Safely prepare aircraft for inspections and maintenance checks and services
  • Perform scheduled inspections and assist in performing special inspections
  • Perform operational checks and diagnoses and troubleshooting of aircraft systems using special tools and test equipment to perform functional and continuity test of electrical and electronic systems
  • Use and perform operator maintenance and special tools and aircraft ground support equipment
  • Apply comprehensive technical avionic/electrician expertise to solve complex to moderate problems by interpreting technical documentation such as aircraft technical manuals, test manuals to include maintenance information and other technical guidance provided
  • Interpret test results to diagnose malfunctions, and adjusts, repairs, or replaces defective parts
  • Inspect and repair aircraft wiring
  • Inspect test and repair aircraft’s full pitot system and components
  • Apply technical knowledge of power plant systems in determining equipment malfunctions and required expertise in restoring equipment to operating condition and operation
  • Participate in maintenance test flight and operation checks as required by technical manuals
  • Install electrical and electronic parts, assemblies, systems, and equipment in aircraft, according to specific technical manuals, wiring diagrams, and other specifications, using hand tools and power tools
  • Prioritize workloads to maintain maintenance sc heduRemove and reinstall aircraft Subsystem assemblies and components such as all avionics and control boxes for all electrical flight control, communication and navigation systems
  • Safely prepare aircraft for inspections and maintenance checks and services
  • Perform scheduled inspections and assist in performing special inspections
  • Perform operational checks and diagnoses and troubleshooting of aircraft systems using special tools and test equipment to perform functional and continuity test of electrical and electronic systems
  • Use and perform operator maintenance and special tools and aircraft ground support equipment
  • Apply comprehensive technical avionic/electrician expertise to solve complex to moderate problems by interpreting technical documentation such as aircraft technical manuals, test manuals to include maintenance information and other technical guidance provided
  • Interpret test results to diagnose malfunctions, and adjusts, repairs, or replaces defective parts
  • Inspect and repair aircraft wiring
  • Inspect test and repair aircraft’s full pitot system and components
  • Apply technical knowledge of power plant systems in determining equipment malfunctions and required expertise in restoring equipment to operating condition and operation
  • Participate in maintenance test flight and operation checks as required by technical manuals
  • Install electrical and electronic parts, assemblies, systems, and equipment in aircraft, according to specific technical manuals, wiring diagrams, and other specifications, using hand tools and power tools
  • Prioritize workloads to maintain maintenance schedules on assigned projects schedule for aircraft
  • Follow all established safety guidelines and regulations
  • Perform other duties as required
  • Les on assigned projects schedule for aircraft
  • Follow all established safety guidelines and regulations
  • Perform other duties as required.

Avionics Technician

Dassault Falcon Jet
08.2017 - 09.2017
  • Install and test cabin systems and electrical systems and equipment on Dassault Falcon Jets 7x/8x corporate aircraft
  • Locate work area using drawings which specifies airplane number, section number, and three-point location
  • Obtain and verify kitted (pre-selected) detail parts, standards, and assemblies were issued correctly
  • Ensure that parts issued are effective for the airplane and are free of visible defects
  • If parts are not pre-picked, selects parts and ensures that parts selected are effective for the airplane and are free of visible defects
  • Operate mechanical lifts of various types as required
  • Set up assembly tools per tooling instructions or drawing
  • Cut wires to specified length per drawing using wire cutters
  • Group and identify wire runs per drawing
  • Route, clamp and tie wires and/or wire bundles, hand form as necessary per drawing
  • Cut and install plastic sleeves over wires and/or wire bundles, as required
  • Attach appropriate fittings to wire ends, such as lug or spade connectors, crimp and terminate using hand or machine crimping tools
  • Hook-up and/or connect wiring to accessories including relays, circuit breakers, switches per drawing using hand tools and/or soldering gun
  • Perform continuity tests of electrical assemblies using ohmmeter, test lights and other electrical testing equipment
  • Handle and dispose of hazardous materials in approved manner
  • Determines and obtains correct type and size fasteners per drawing and/or rivet or grip gauge to install parts/assemblies such as standoffs, wire bundles, clamps
  • Install fasteners in correct sequence per drawing, using correct tools such as rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner
  • Possesses knowledge of routing, clamping, tying, connecting and terminating wires and/or wire bundles in electrical systems and assemblies
  • Uses various types of hand tools and/or hand-held power tools and various types of precision measuring tools
  • Complies with the company FOD program; 5-S program; tool control program; and all safety regulations
  • Adapts to sudden schedule changes
  • Maintains orderly work area
  • Performs other duties as assigned.

Avionics Technician

AAR Aircraft Services
04.2017 - 06.2017
  • Prepares multiple records such as work order documentation, logs, and time and material records, as instructed
  • Complies with the company FOD program; 5-S program; tool control program; and all safety regulations
  • Adapts to sudden schedule changes
  • Maintains or Inspects, tests, adjusts, and repairs avionics equipment, such as radar, radio, pulse, navigation, auto pilot and compass systems, installed in aircraft
  • Using hand tools and test equipment, inspects components of avionics equipment for defects, such as loose connections and frayed wire and for accuracy of assembly and installation and calibrates installed or repaired equipment to prescribed specifications
  • Tests avionics equipment to determine performance and airworthiness, using test equipment, oscilloscopes, digital meters and counters, and circuit analyzers
  • Adjusts, repairs, or replaces defective components based on analysis of test results, following blueprints, schematics, handbooks, and other technical documents
  • Adjusts frequencies of radio sets by signaling ground station and turning set screws
  • Operated ground station for air-to- station check of radar or other equipment
  • Prepares and maintains orderly work area
  • Performs other duties as assigned.

Avionics Technician

Lockheed/Martin
01.2017 - 02.2017
  • Performs avionics and electrical installs on H-60 Blackhawk helicopters
  • Troubleshoots malfunctions in aircraft electrical and avionics systems of moderate difficulty at the organizational or depot maintenance level
  • Repairs, replaces, and rebuilds electrical system wiring, connectors, and components using hand tools, power tools, and applicable test equipment
  • Fabricate harness and electrical assemblies
  • Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to accomplish installs
  • Adheres to all safety regulations
  • Performs other duties as assigned.

Cabin Systems Tester

Boeing Co
08.2015 - 12.2016
  • Install and test cabin systems and electrical systems and equipment on Boeing 787-8/9/10 Series aircraft (Dreamliners)
  • Locate work area using drawings which specifies airplane number, section number, and three-point location
  • Obtain and verify kitted (pre-selected) detail parts, standards, and assemblies were issued correctly
  • Ensure that parts issued are effective for the airplane and are free of visible defects
  • If parts are not pre-picked, selects parts and ensures that parts selected are effective for the airplane and are free of visible defects
  • Operate mechanical lifts of various types as required
  • Set up assembly tools per tooling instructions or drawing
  • Cut wires to specified length per drawing using wire cutters
  • Group and identify wire runs per drawing
  • Route, clamp and tie wires and/or wire bundles, hand form as necessary per drawing
  • Cut and install plastic sleeves over wires and/or wire bundles, as required
  • Attach appropriate fittings to wire ends, such as lug or spade connectors, crimp and terminate using hand or machine crimping tools
  • Hook-up and/or connect wiring to accessories including relays, circuit breakers, switches per drawing using hand tools and/or soldering gun
  • Perform continuity tests of electrical assemblies using ohmmeter, test lights and other electrical testing equipment
  • Handle and dispose of hazardous materials in approved manner
  • Determines and obtains correct type and size fasteners per drawing and/or rivet or grip gauge to install parts/assemblies such as standoffs, wire bundles, clamps
  • Install fasteners in correct sequence per drawing, using correct tools such as rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner
  • Possesses knowledge of routing, clamping, tying, connecting and terminating wires and/or wire bundles in electrical systems and assemblies
  • Uses various types of hand tools and/or hand-held power tools and various types of precision measuring tools
  • Complies with the company FOD program; 5-S program; tool control program; and all safety regulations
  • Adapts to sudden schedule changes
  • Maintains orderly work area
  • Performs other duties as assigned.

Avionics Technician, Production Tester

AAR Aircraft Services
02.2015 - 08.2015
  • Multiple records such as work order documentation, logs, and time and material records, as instructed
  • Complies with the company FOD program; 5-S program; tool control program; and all safety regulations
  • Adapts to sudden schedule changes
  • Maintains or Inspects, tests, adjusts, and repairs avionics equipment, such as radar, radio, pulse, navigation, auto pilot and compass systems, installed in aircraft
  • Using hand tools and test equipment, inspects components of avionics equipment for defects, such as loose connections and frayed wire and for accuracy of assembly and installation and calibrates installed or repaired equipment to prescribed specifications
  • Tests avionics equipment to determine performance and airworthiness, using test equipment, oscilloscopes, digital meters and counters, and circuit analyzers
  • Adjusts, repairs, or replaces defective components based on analysis of test results, following blueprints, schematics, handbooks, and other technical documents
  • Adjusts frequencies of radio sets by signaling ground station and turning set screws
  • Operated ground station for air-to- station check of radar or other equipment
  • Prepares and maintains orderly work area
  • Performs other duties as assigned.

Avionics Maintenance Technician

Flightstar Aircraft Services, LLC
10.2014 - 12.2014
  • Installs, inspects tests, adjusts, and repairs aircraft avionics equipment and WI-FI systems on Boeing 757-200 (ER) Series aircraft
  • Performs operational tests and functional checks on aircraft avionics systems, and troubleshoots and corrects problems
  • Reads blueprints and schematics
  • Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned work
  • Troubleshoots and corrects problems related to avionics systems through the use of wiring diagrams and maintenance manuals
  • Reads blueprints and schematics
  • Connects components to systems such as radio systems, radar, and navigation systems in aircraft
  • Reads maintenance manuals to identify and locate aircraft components on the aircraft, and accurately implements instructions of maintenance manuals
  • Performs repairs on noted discrepancies, and effectively researches manufacturer’s manuals for appropriate repair procedures prior to performing repairs
  • Performs skilled manual and technical work using hand tools, soldering irons, circuit testers, oscilloscopes, voltmeters, ammeters, and ohmmeters
  • Follows safety procedures and wears/uses appropriate safety equipment for the work being performed
  • Reads instructions and safety information as necessary for proper and safe completion of assigned work
  • Prepares and maintains simple records such as work order documentation, logs, and time and material records, as instructed
  • Complies with the company FOD program; 5-S program; tool control program; and all safety regulations
  • Adapts to sudden schedule changes
  • Maintains orderly work area
  • Performs other duties as assigned.

Avionics Technician

Commercial Jet Services
07.2014 - 09.2014
  • Possesses thorough knowledge of all necessary avionics test equipment, test procedures, manufacturer’s maintenance manuals, other pertinent technical data and procedures before commencing any assigned task
  • Troubleshoots, repairs, modifies and calibrates aircraft electronic systems and components on Boeing 737-300/400 Series aircraft
  • Certifies integrated avionic systems and components, utilizing shop avionics support equipment and specialized precision measuring equipment
  • Analyzes malfunctions and calibrates and performs maintenance on avionics support equipment using calibration standards
  • Installs, aligns and wires electrical and electronic components such as sensors, radio communications, antennas and lights
  • Performs continuity checks and functional checkouts of complete aircraft systems
  • Routes wiring and determines the best location and method for installing and removing electronic equipment and systems by applying general trade practices and adhering to prints originated by Electrical Engineering, Electronics Engineering, various modifications centers and aircraft manufacturers wiring diagrams
  • Fabricates wiring harnesses, solder connector plugs, strips and hand lugs wiring
  • Demonstrate familiarization with the principle elements of assigned duties
  • Thorough knowledge of basic hand tools
  • Complies with the company FOD program; 5-S program; tool control program; and all safety regulations
  • Adapts to sudden schedule changes
  • Maintains orderly work area
  • Performs other duties as assigned.

MT/Electrical Installer

Boeing Co
12.2013 - 06.2014
  • Install electrical systems, equipment and assemblies in the Join and Installation, System and Installations, Wing Stub Join, Wing Body Join, Final Body Join, Final Assembly and various other major sub assembly shops on Boeing 787- 8/9/10 Series aircraft (Dreamliners)
  • Locate work area using drawings which specifies airplane number, section number, and three-point location
  • Obtain and verify kitted pre-selected detail parts, standards, and assemblies were issued correctly
  • Ensure that parts issued are effective for the airplane and are free of visible defects
  • If parts are not pre-picked, selects parts and ensures that parts selected are effective for the airplane and are free of visible defects
  • Operate mechanical lifts of various types as required
  • Set up assembly tools per tooling instructions or drawing
  • Cut wires to specified length per drawing using wire cutters
  • Group and identify wire runs per drawing
  • Route, clamp and tie wires and/or wire bundles, hand form as necessary per drawing
  • Cut and install plastic sleeves over wires and/or wire bundles, as required
  • Attach appropriate fittings to wire ends, such as lug or spade connectors, crimp and terminate using hand or machine crimping tools
  • Hook-up and/or connect wiring to accessories including relays, circuit breakers, switches per drawing using hand tools and/or soldering gun
  • Perform continuity tests of electrical assemblies using ohmmeter, test lights and other electrical testing equipment
  • Handle and dispose of hazardous materials in approved manner
  • Determines and obtains correct type and size fasteners per drawing and/or rivet or grip gauge to install parts/assemblies such as standoffs, wire bundles, clamps
  • Install fasteners in correct sequence per drawing, using correct tools such as rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner
  • Possesses knowledge of routing, clamping, tying, connecting and terminating wires and/or wire bundles in electrical systems and assemblies
  • Uses various types of hand tools and/or hand- held power tools and various types of precision measuring tools
  • Complies with the company FOD program; 5-S program; tool control program; and all safety regulations
  • Adapts to sudden schedule changes
  • Maintains orderly work area
  • Performs other duties as assigned.

Avionics Technician

ST Aerospace Mobile, Inc
01.2012 - 12.2013
  • Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting
  • Uses hand tools to install equipment in aircraft including TCAS-NAV/COMM altitude indicator, transponder, flight recorder, flight director, marker beacon, glide scope, radar altitude indicator, vor/loc indicator, airspeed indicator, altimeter directional gyro and voice recorder
  • Inspects tests, adjusts, and repairs avionics equipment on Boeing 757, Airbus A-330, and Boeing MD-10 aircraft
  • Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring
  • Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity
  • Utilizes test equipment to inspect components of avionics equipment for defects, such as loose connections and frayed wire, and for accuracy of assembly and installation
  • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system Sets up and operates necessary test equipment
  • Responsible for conducting functional and operational tests to evaluate performance and reliability
  • Performs tests on avionics equipment under simulated or actual operating conditions to determine performance and airworthiness, using test equipment, such as TCAS test set, transponder test set and PITOT static test set
  • Adjusts, repairs, or replaces defective components based on analysis of test results, following blueprints, schematics, handbooks, and other technical documents, using hand tools
  • Other duties include calibrating installed or repaired equipment to prescribed specifications
  • Ensures quality and efficiency of all installations, troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems
  • Also troubleshoots electrical systems and assemble radio components
  • Responsible for adjusting frequencies of radio sets by signaling ground station and turning setscrews
  • Familiar with wiring harness assembly/kit build
  • Performs and complies with engineering changes and modifications as required
  • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection
  • Tests and maintains test equipment, electronic systems, and components
  • Complies with the company FOD program; 5-S program; tool control program; and all safety regulations
  • Maintains orderly work area.

Plumber

Miller Humphrey Plumbing & Electric
01.2005 - 11.2005
  • Assemble pipe sections, tubing and fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, razing and welding equipment
  • Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks
  • Review blueprints and building codes and specifications to determine work details and procedures
  • Prepare written work cost estimates and negotiate contracts
  • Study building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring
  • Follow all safety rules and regulations.

Education

Avionics Technology, Associates in Applied Science Degree - Avionics Technician

Alabama Aviation Center-Ozark Campus, a unit of Enterprise State Community College
AL
05.2011

Skills

  • Maintenance documentation
  • Preventive Maintenance
  • Safety procedures
  • Hardware installation

Certification

  • FCC License, Federal Communications Commission, to operate licensed radio stations in the Aviation, Marine and International Fixed Public Radio Services only., 05/01/11
  • Fiber optic examination & cleaning, 2014
  • Fiber optic installation, 2014
  • Fiber optic assembly, bonding & grounding, 2014
  • Coaxial cable crimping & sealant, 2014
  • Certified Journeyman Plumber, 2007
  • Certified Master Plumber, 2009

Other

Prompt, Reliable, Dependable, Highly motivated, Quick learner, Self-starter, Excellent ability to read and interpret basic blueprints and schematic diagrams, Possesses understanding of interfacing, troubleshooting, and installation of avionics/electrical equipment, Sound judgment and objectivity in decision-making, Honesty and integrity, Strong commitment to maintaining safe, compliant aircraft at all times, Excellent communication skills, both verbal and written, Can work in confined areas and lift up to 85 pounds, Negotiable, True, 75-100%

Timeline

Avionics Technician

Ace Aeronautics
03.2024 - Current

Avionics Technician

UC, Yulista Integrated Solutions LLC
01.2020 - 04.2020

Avionics Technician

CH, Science and Engineering Services, SES, LLC
11.2017 - 11.2019

Avionics Technician

Dassault Falcon Jet
08.2017 - 09.2017

Avionics Technician

AAR Aircraft Services
04.2017 - 06.2017

Avionics Technician

Lockheed/Martin
01.2017 - 02.2017

Cabin Systems Tester

Boeing Co
08.2015 - 12.2016

Avionics Technician, Production Tester

AAR Aircraft Services
02.2015 - 08.2015

Avionics Maintenance Technician

Flightstar Aircraft Services, LLC
10.2014 - 12.2014

Avionics Technician

Commercial Jet Services
07.2014 - 09.2014

MT/Electrical Installer

Boeing Co
12.2013 - 06.2014

Avionics Technician

ST Aerospace Mobile, Inc
01.2012 - 12.2013

Plumber

Miller Humphrey Plumbing & Electric
01.2005 - 11.2005

Avionics Technology, Associates in Applied Science Degree - Avionics Technician

Alabama Aviation Center-Ozark Campus, a unit of Enterprise State Community College

Similar Profiles

CREATE PROFILE
JEFFREY TELLIS