Jennifer Bingman
Saratoga Springs,UT
Summary
Master electrician with years of data center experience. Extensive knowledge of various platforms such as Autodesk Construction Cloud, CXAlloy, Procore, Bluebeam Review, and Microsoft Office. Equipped with skills for every aspect of data center construction such as preconstruction, constructability, pre-fabrication, quality assurance and control, installation, redlines, and as-builts. Specific expertise regarding file structure and documentation and thorough knowledge of electrical codes and standards.
Overview
20
20
years of professional experience
Work History
Commissioning Foreman
Cache Valley Electric Co.
03.2025 - Current
- Set up electrical testing equipment and successfully executed Level 4 commissioning activities
- Installed tap cans in 400 Amp Starline Busways
- Coordinated with third party testing agencies and general contractor to place busways under load
- Operated AVTron and RLB load banks to place bus under load
- Used infrared thermometer to monitor temperatures at electrical connections and splices
- Directed crew and trained new people on how to successfully commission network suites and data halls
- Coordinated with building owner to Lock Out/Tag Out electrical distribution equipment
- Built lockboxes for field personnel to work safely on electrical equipment
- NFPA70E certification
- Ran a team of six journeyman electricians to set up load bank equipment and meters to complete tests ahead of general contractor's schedule
Master Electrician
A-C Electric Company
11.2024 - 12.2024
- Installed Smart Panels in a large utility scale solar project
- Drove utility equipment to deliver panels to install locations
- Trained apprentice electricians how to install tension cable and cable supports
- Connected strings of 300V solar panels safely
Master Electrician
Rosendin Electric
06.2024 - 10.2024
- Installed branch circuits for goal posts at QTS data center
- Conduit bending and wire pulling
- Terminated Power Distribution Units
- Trained team members how to dress and terminate branch panels
- Installed 400 Amp Starline Bus
Master Electrician
Cache Valley Electric Co.
04.2024 - 06.2024
- Conduit bending and install for telecommunications systems at the Phoenix airport
- Accessing secure facilities and coordinating with operations to navigate equipment through passenger areas
- Coordinating with telecommunications technicians to route conduit to correct areas for Wireless Access Points
- Training apprentices how to use a triple nickle and how to install conduit supports according to the National Electrical Code
Master Electrician
Solve Inc
01.2024 - 04.2024
- Installed Smart Panels on a large scale utility solar project
- Coordinated with another journeyman to replace damaged panels
- Trained apprentices how to safely install solar panels
- Quality Assurance and Control to verify spacing and angle was within specification tolerance
Master Electrician
Rosendin Electric
02.2023 - 05.2023
- Installed 4" conduit and supports at QTS Data Center
- Successfully completed layout of conduit supports and junction boxes to match BIM model
- Trained apprentices on pre-fabrication of large conduit for power feeder distribution systems in a redundant electrical system
Master Electrician
Ec Electric
09.2022 - 01.2023
- Installing conduit and wiring for tools at Intel Semiconductor Fab
- Safely climbing into the interstitial to install conduit and supports
- Training apprentices how to use a one shot bender for field bends on three inch conduit
- Working in the fab to install sensors on the catwalk
Constructability Manager
Cache Valley Electric Co.
06.2019 - 09.2022
- Ran a team of constructability specialists for successful completion of large scale data center
- Coordinated with BIM modelers to make necessary changes in Revit to avoid rework
- Reviewing and comparing drawings across all scopes of work to identify discrepancies
- Marking up drawings in Bluebeam and writing RFI's to address discrepancies with engineers
- Flying the model and coordinating with BIM modelers to clear clashes prior to deadlines for sign off
- Signing off on prints and model versions
- Coordinating with field installers and Trimble technician to update live model and keep redlines accurate
- Building and submitting accurate "As Built" packages in Procore after project completion
- Attending coordination meetings and identifying issues regarding schedules or scope gaps
- Coordinating with other trades to locate electrical systems in areas which would not interfere with their equipment
- Used Microsoft Office to build trackers to keep tabs on that status of each individual task
- Communicated in Microsoft Teams using planners to keep constructability team on the same page and on track
Equipment Technician
IM Flash Technologies
10.2017 - 06.2019
- Performed frequent inspections of company equipment and corrected malfunctioning equipment
- Troubleshot equipment failures and remedied the problem by addressing the root cause
- Maintained compliance with company standards to perform all maintenance activities
- Communicated operational issues and changes to supervisor on regular basis
- Followed standards and procedures to maintain safe work environment
- Prioritizes work based on constraints in the fab
- Communicates with remote operations center to gain knowledge about production recipes and programs
- Utilizes programs such as E3, Klarity, Etoolmon, Data Daemon, Space, Micron Central, and Learning Management System
- Worked as a team with other technicians to coordinate manpower based on tools under constraint
Instructor
Utah Electrical Joint Apprenticeship Training Committee
06.2013 - 07.2017
- Taught apprentice electricians aspects of the electrical trade
- Courses taught include advanced conduit bending, fire alarm systems, solar panel systems, NFPA 70 National Electrical Code, NFPA 70e Electrical Safety, direct current theory, alternating current theory, OSHA 10 and 30, communications systems, and code calculations
- Taught continuing education for journeyman wireman to meet state credit requirements
- Developed powerpoints to update curriculum
- Created tests and classroom assignments using Microsoft Office
- Coordinated with other instructors to organize a 5 year apprenticeship
- Developed hands on practice labs for classes taught
Foreman
Cache Valley Electric
11.2011 - 06.2013
- Conducted all critical pre-installation conferences with general contractors, subcontractors, and Army Corps of Engineers
- Ran a crew of 12 electricians and apprentices to successfully install conduit and wiring of control systems for a Tier 3 data center
- Interpreted schematics of Emergency Shutdown Systems and Emergency Power Off Systems
- Administered Lock Out Tag Out Devices to isolate and safety work on a UPS system
Journeyman Electrician
Cache Valley Electric
08.2010 - 12.2010
- Installed various control device for large Air Handling Units at EBAY's Tier 3 Data Center
- Pulled wire and terminated instruments including pressure sensors, temperature sensors, fan speed control devices, and humidity control sensors
- Terminated Variable Frequency Drive cabinets for motor speed control on large Air Handling Units
Journeyman Electrician
Skyline Electric Company
04.2010 - 08.2010
- Installed conduit systems for runway lighting at Salt Lake International Airport
- Worked with an apprentice to install lighting control for signage on a runway under construction
- Coordinated with air traffic controllers to fix lighting on an active runway
- Coordinated with other electricians to conduct wire pulls up to 2500 feet long
Electrician Apprentice
Cache Valley Electric
05.2009 - 01.2010
- Installed bus duct system for EBAY's Tier 3 Data Center
- Worked under a Journeyman Wireman operating heavy equipment to layout, lift, and install 480 volt bus duct for distribution gear
- Applied exothermic welding connections for a grounding grid in the foundation of a Tier 3 Data Center
Apprentice Electrician
Wasatch Electric
01.2007 - 02.2009
- Installed heat trace cable in the Trax and Frontrunner platforms along the Wasatch Front
- Installed conduit systems for electrical lighting and fire alarm systems at Ogden High School
- Installed control wiring and terminating limit switches at Cerro Copper Factory in Cedar City, Utah
- Installed low voltage outlets, computer outlets, exit signs, and lighting at Ogden Library
- Operated excavating equipment to install underground conduit systems at REAL Soccer Stadium
Apprentice Electrician
Cache Valley Electric
10.2005 - 01.2007
- Installed PVC conduit systems for light poles in the parking lot of IHC hospital in Murray, Utah
- Conducted rough in for a small commercial facility
- Installed rough in and trim out for patient care areas in a large hospital
- Followed all code requirements for NFPA 99 for patient care areas
- Installed isolated grounding systems for sensitive electronic equipment
Education
Master Electrical License - undefined
On The Job Training
2016
Certificate of Completion - Teaching Trade School
National Training Institute
Ann Arbor, Michigan2016
Journeyman Electrician License - Journeyman Electrical License
Utah Electrical Joint Apprenticeship Training Commitee
Salt Lake City, Utah2010
Associate of Science - Science
Lake Land College
Mattoon, Illinois2003
Skills
- Constructability Expertise
- Quality Assurance and Control
- Commissioning Foreman Experience
- Master Electrical License
- Strong background in safety
- Technical writing skills
- Exceptional organizational skills
- Microsoft Office applications skills
- Reading and understanding specifications
- Writing RFI's
Timeline
Commissioning Foreman
Cache Valley Electric Co.
03.2025 - Current
Master Electrician
A-C Electric Company
11.2024 - 12.2024
Master Electrician
Rosendin Electric
06.2024 - 10.2024
Master Electrician
Cache Valley Electric Co.
04.2024 - 06.2024
Master Electrician
Solve Inc
01.2024 - 04.2024
Master Electrician
Rosendin Electric
02.2023 - 05.2023
Master Electrician
Ec Electric
09.2022 - 01.2023
Constructability Manager
Cache Valley Electric Co.
06.2019 - 09.2022
Equipment Technician
IM Flash Technologies
10.2017 - 06.2019
Instructor
Utah Electrical Joint Apprenticeship Training Committee
06.2013 - 07.2017
Foreman
Cache Valley Electric
11.2011 - 06.2013
Journeyman Electrician
Cache Valley Electric
08.2010 - 12.2010
Journeyman Electrician
Skyline Electric Company
04.2010 - 08.2010
Electrician Apprentice
Cache Valley Electric
05.2009 - 01.2010
Apprentice Electrician
Wasatch Electric
01.2007 - 02.2009
Apprentice Electrician
Cache Valley Electric
10.2005 - 01.2007
Master Electrical License - undefined
On The Job Training
Certificate of Completion - Teaching Trade School
National Training Institute
Journeyman Electrician License - Journeyman Electrical License
Utah Electrical Joint Apprenticeship Training Commitee
Associate of Science - Science
Lake Land College
Similar Profiles
Dallen C.Dallen C.
Lead Journeyman Electrician at Cache Valley Electric Co.Lead Journeyman Electrician at Cache Valley Electric Co.
Juan Manuel Hernandez RosalesJuan Manuel Hernandez Rosales
Inside wireman (apprentice) at Cache Valley ElectricInside wireman (apprentice) at Cache Valley Electric
Tayven NortonTayven Norton
Traffic Signal Technician at Cache Valley Electric Co.Traffic Signal Technician at Cache Valley Electric Co.
Trevor DouthitTrevor Douthit
Apprentice Plumber at Vertical SolutionsApprentice Plumber at Vertical Solutions
Jennifer SaleJennifer Sale
Agency Owner at Monte Rosa Insurance AgencyAgency Owner at Monte Rosa Insurance Agency