Jermey Clay
Trinity
Summary
Accomplished General Welder with extensive experience at Roger Engineering, specializing in gas metal arc and shielded metal arc welding. Demonstrated exceptional attention to detail and critical thinking by consistently meeting quality standards and enhancing fabrication efficiency. Proven ability to train new team members while maintaining a strong focus on safety and compliance.
Overview
4
4
years of professional experience
Work History
General Welder
Roger Engineering
06.2024 - Current
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Welded in flat, horizontal, vertical, and overhead positions.
- Fabricated shop parts directly from blueprints.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Prepared welding equipment to perform advanced welding work.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Inspected welds and checked critical measurements to meet specifications.
- Chipped off excess weld, slag, and spatter using hand tools.
- Utilized blueprints and diagrams to compare finished products against design specifications.
- Salvaged and rebuilt parts to achieve cost savings and reduce waste.
- Observed hydrostatic and dimension tolerance tests to evaluate weld quality and conformance to specifications.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
- Assisted in training new solderers on soldering procedures.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
- Inspected welds for accuracy and conformance to specifications.
- Welded metal components in vertical, overhead and flat positions.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Completed projects safely by closely monitoring conditions when lighting torches and using tools.
- Detected faulty operation of equipment and defective materials and promptly resolved issues.
- Suggested improvements to soldering process to increase efficiency.
- Maintained safety by wearing protective equipment, staying alert and following procedures.
- Monitored and documented soldering results.
- Evaluated and tested various soldering materials for accuracy.
- Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
- Replaced faulty parts and components in soldering process.
- Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
- Inspected parts and components for defects in soldering process.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
- Selected and operated shielded metal arc and gas metal arc welding equipment.
General Welder
Sabre Industries
12.2020 - 04.2024
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Fabricated shop parts directly from blueprints.
- Welded in flat, horizontal, vertical, and overhead positions.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Prepared welding equipment to perform advanced welding work.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Inspected welds and checked critical measurements to meet specifications.
- Chipped off excess weld, slag, and spatter using hand tools.
- Utilized blueprints and diagrams to compare finished products against design specifications.
- Salvaged and rebuilt parts to achieve cost savings and reduce waste.
- Observed hydrostatic and dimension tolerance tests to evaluate weld quality and conformance to specifications.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
- Assisted in training new solderers on soldering procedures.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
- Inspected welds for accuracy and conformance to specifications.
- Welded metal components in vertical, overhead and flat positions.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Maintained safety by wearing protective equipment, staying alert and following procedures.
- Suggested improvements to soldering process to increase efficiency.
- Evaluated and tested various soldering materials for accuracy.
- Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
Education
Welding Certification - GTAW, GMAW, SMAW, FCAW WELDING
Tulsa Welding School
Tulsa, OK05-2020
High School Diploma -
Trinity High School
Trinity, TX06-2019
Skills
- Welding safety
- Overhead welding
- Structural welding
- Pipe welding
- Gas metal arc welding
- Shielded metal arc welding
- Vertical welding
- Fabrication techniques
- Welding inspection
- Soldering techniques
- Torch cutting
- Weld slagging
- Welding
- Reweld application
- Pipe fitting
- Weld tacking
- Fabrication
- Valve repairs
- Scaffolding safety
- Machine adjustment
- TIG welding expert
- Maintaining components
- Time management
- Blueprint reading
- MIG welding professional
- Precision measuring
- Personal protective equipment
- First aid training
- Hand-eye coordination
- Tool operation
- Supply management
- Specification interpretation
- Attention to detail
- OSHA compliance
- Materials selection
- AWS certified
- Precision measuring tools
- Equipment operation
- Health and safety
- Equipment Repair
- Arc welding
- Surface preparation
- Fire prevention
- Quality assurance
- Design interpretation
- Cutting techniques
- Tool repair and maintenance
- Measurement tools
- Inspection protocols
- Stick welding
- Equipment maintenance
- Hand-forming workpieces
- Critical thinking
- Steel fabrication
- Sub-arc welding
- Welding procedure specification
- Sheet metal fabrication
- Shaping and cutting
- Material selection
- Worksite organization
- Hazardous material handling
Timeline
General Welder
Roger Engineering
06.2024 - Current
General Welder
Sabre Industries
12.2020 - 04.2024
Welding Certification - GTAW, GMAW, SMAW, FCAW WELDING
Tulsa Welding School
High School Diploma -
Trinity High School
Similar Profiles
Roger ShawRoger Shaw
Engineering Consultant at Roger Shaw EngineeringEngineering Consultant at Roger Shaw Engineering
Rawan AltekreetiRawan Altekreeti
Student Nurse Intern at Roger Williams Hospital, Now Roger Williams Medical CenterStudent Nurse Intern at Roger Williams Hospital, Now Roger Williams Medical Center
Antonia GarciaAntonia Garcia
Paraprofessional at Roger Sherman Elementary SchoolParaprofessional at Roger Sherman Elementary School