Jocelyn Solis
Edinburg,TX
Summary
Professional Industrial Electrician/Electrical Tech with years of
experience installing, maintaining, and repairing complex electronic
equipment. Proven leadership abilities along with extensive knowledge
from a combination of apprenticeships, meeting deadlines, and
delivering high-quality work. Proficient with cutting-edge diagnostic
equipment and traditional repair methodologies. Efficient and innovative
when creating installation and repair plans that meet operational goals
and improve overall performance.
Overview
9
9
years of professional experience
1
1
Certification
Work History
Electrician
EnerMech Mechanical Services
Phoenix, AZ
06.2023 - Current
- Installed and maintained electrical wiring, equipment, and fixtures in accordance with local codes and regulations.
- Tested electrical systems to ensure proper functioning and safety.
- Installed conduit systems including EMT, rigid conduit, flexible conduit.
- Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
- Ran cable trays for power distribution from main panels to branch circuits.
- Connected cables from service entrance to meters and main distribution panel boards.
- Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
- Installed ground fault circuit interrupter outlets per code requirements.
- Pulled wires through conduit runs using fish tapes or pull strings when necessary.
- Assembled junction boxes according to code requirements.
- Measured and prepared supplies for electrical tasks.
Electrician
MEITEC Electrical And Instrumentation
Phoenix, AZ
01.2023 - 06.2023
- Connected wires to circuit breakers, transformers or other components.
- Installed conduit, wire and motor controls.
- Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Installed leads and connected cables to motors, apparatus and equipment.
- Inspected all electrical components for damage or wear and tear.
- Built panels containing relays, switches, circuit breakers., according to customer specifications.
- Collected and analyzed data and created reports based on findings.
Electrician
Great Arrow Builders
Monaca, PA
03.2021 - 09.2022
- Perform routine maintenance and work with fellow Electrician’s to troubleshoot motors and controls
- Assist the Master Electrician with inspecting and testing electrical systems using oscilloscopes, voltmeters, and ohmmeters
- Assist the Technical Advisors (TA) with field acceptance testing of Emergency Diesel Generator, Battery Chargers, Uninterruptable Power System, and Air Compressors
- Plan, layout, install, and repair wiring, install conduit, electrical fixtures, and control equipment
- Measure, cut bend, thread, assemble, and install electrical conduit for light fixtures
- Measure, cut, and install cable trays and wire trays
- Install electrical wiring in conduits, cable trays, channel trays, and pinned along structures with the use of Hilti guns
- Connect wires to power equipment such as jb boxes, panels, and lighting fixtures.
Electrician
SNC-Lavalin
Alvin, TX
09.2020 - 03.2021
- Executed plans of electrical wiring for well-functioning lighting, and other electrical systems
- Installed electrical fixtures and equipment for alarm and other systems
- Read blueprints or technical diagrams and installed and maintained wiring, control, and lighting systems
- Inspected electrical components, such as transformers and circuit breakers.
- Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
- Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
- Pulled insulated wires or cables through conduits to complete circuits.
Electrician Journeyman
Meitec Electrical and Instrumentation
Westlake, LA
03.2019 - 06.2020
- Worked with Field Engineers to improve quality and eliminate rework identified during the work closure review process
- Coordinated with the Field Supervisor and Subcontractors to plan/support and create construction schedules
- Worked on high voltage switchgear projects involving transformer hookups and terminations up to 15kv level.
- Connected wires to power equipment such as electrical motors, switch gears, and transformers
- Installed heat trace cables and boxes.
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers, transformers or other components.
Electrical Apprentice
Triad Electric and Controls
Hackberry, LA
04.2018 - 03.2019
- Stamped stainless tags and printed cable tray tags and laser phenolic tags for mcc's
- Pulled wires through conduit runs using fish tapes or pull strings when necessary.
- Connected wires to power equipment such as electrical motors, switch gears, and transformers
- Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
- Interpreted blueprints and schematics to provide recommendations, perform updates, and install new electrical equipment
- Collaborated with four electricians to install, repair, and update circuits and lighting fixtures
- Troubleshot and repaired equipment, submitted accurate work logs, and followed directions of Master Electrician.
Electrical Apprentice
McDermott/CB&I
Lake Charles, LA
12.2017 - 03.2018
- Splice wire by stripping insulation from terminal leads with electrical knife or pliers, crimping wires together with hand crimpers
- Identified electrical problems using a variety of testing devices
- Planned, installed, and repaired wiring, conduit, electrical fixtures, apparatus, and control equipment.
- Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
- Ran cable trays for power distribution from main panels to branch circuits.
- Pulled wires through conduit runs using fish tapes or pull strings when necessary.
Electrical Apprentice
Saulsbury Industries
Coyanosa, TX
05.2016 - 08.2017
- Maintained paperwork, ordered material, and recorded inventory
- Assisted in completing terminations, bending and placing of conduit, and pulling of cable
- Located and placed correct fittings
- Installed and terminated plant lighting from 480v to 120v
- Pulled cable from 34.5kv to 120v controls
- Installed conduit systems including EMT, rigid conduit, flexible conduit.
- Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
- Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
Electrician
Saulsbury Industries Inc.
Odessa, TX
04.2015 - 02.2016
- Installed, maintained, and repaired electrical wiring, equipment, and fixtures
- Ensured that work was in accordance with relevant codes
- Assisted with running and bending conduit and connected instrument wires in the field
- Installed grounding system per NEC code requirements.
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers and transformers.
- Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
- Helped with office work and basic cleaning duties, scanned paperwork, and helped file paperwork for quality control.
Education
High School Diploma -
Ignite Public Schools
Skills
- Quality Assurance
- New Construction
- Commercial construction experience
- Wiring diagrams
- MS Office proficient
- Knowledge of Standard for Electrical Safety in the Workplace (NFPA 70E)
- Lockout and tagout procedures
Certification
- NFPA 70E
- Twic
- Electrician Apprentice
- OSHA 30
Timeline
Electrician
EnerMech Mechanical Services
06.2023 - Current
Electrician
MEITEC Electrical And Instrumentation
01.2023 - 06.2023
Electrician
Great Arrow Builders
03.2021 - 09.2022
Electrician
SNC-Lavalin
09.2020 - 03.2021
Electrician Journeyman
Meitec Electrical and Instrumentation
03.2019 - 06.2020
Electrical Apprentice
Triad Electric and Controls
04.2018 - 03.2019
Electrical Apprentice
McDermott/CB&I
12.2017 - 03.2018
Electrical Apprentice
Saulsbury Industries
05.2016 - 08.2017
Electrician
Saulsbury Industries Inc.
04.2015 - 02.2016
High School Diploma -
Ignite Public Schools
Similar Profiles
Cody GrahamCody Graham
Pipefitter Foreman at EnerMech Mechanical ServicesPipefitter Foreman at EnerMech Mechanical Services
Antonio HernandezAntonio Hernandez
Pipefitter at EnerMech Mechanical ServicesPipefitter at EnerMech Mechanical Services
David AguilarDavid Aguilar
Pipefitter at EnerMech Mechanical ServicesPipefitter at EnerMech Mechanical Services
Steven MaitlandSteven Maitland
Project Manager / Senior PM at EnerMech Mechanical ServicesProject Manager / Senior PM at EnerMech Mechanical Services
Jonathan SeguraJonathan Segura
Field Technician at Industrial Thermal ServiceField Technician at Industrial Thermal Service