Summary
Overview
Work History
Education
Skills
Training and Certificates.
Timeline
Generic

John Abraham Kalampukatt

Groves,TX

Summary

Experienced and dependable general worker with a proven track record of efficiently completing tasks in various settings. Skilled in manual labor, equipment operation, and maintaining a clean and organized workspace. Safety-conscious with a strong work ethic and the ability to adapt to different environments. Ready to contribute to a dynamic team and make a positive impact.

Committed job seeker with a history of meeting company needs with consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand.

Overview

8
8
years of professional experience

Work History

Pipefitter

Zachry Industrial
Orange, Texas
03.2023 - 12.2024
  • Threaded and installed pipe using pipe wrench and dies.
  • Observed safe work rules and utilized fall protection and PPE.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Threaded pipes using specified machinery.
  • Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
  • Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
  • Inspected installed systems using hydrostatic testing or pressure gauges.
  • Cut or threaded pipes to blueprint or drawing specifications.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Measured and marked pipes for cutting and threading.
  • Install supports for pipes to keep them in place during installation process.
  • Filled piping systems with water and air to test for leaks.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Using blueprints, laid out scale drawings of pipe systems and supports.
  • Verified and gathered measurements to determine proper piping sizes.
  • Installed supports from ceiling joists to secure pipes in place.
  • Inspect work areas to ensure that they are clean and free from obstructions.

Pipefitter

Bechtel
Beaumont , Texas
06.2021 - 01.2023
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Threaded pipes using specified machinery.
  • Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
  • Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
  • Inspected installed systems using hydrostatic testing or pressure gauges.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Cut or threaded pipes to blueprint or drawing specifications.
  • Maintain records of all work performed including materials used and time taken.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Measured and marked pipes for cutting and threading.
  • Install supports for pipes to keep them in place during installation process.
  • Filled piping systems with water and air to test for leaks.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Using blueprints, laid out scale drawings of pipe systems and supports.
  • Installed supports from ceiling joists to secure pipes in place.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Operated equipment and machinery according to safety guidelines.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.

  • Used valve keys and wrenches to turn valves and shut off water from pipe sections.
  • Threaded and installed pipe using pipe wrench and dies.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Perform routine maintenance on equipment such as checking fluid levels or replacing gaskets when necessary.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Tested plumbing systems for leaks using air and water pressure gauges.
  • Worked effectively in team environments to make the workplace more productive.

Pipefitter

S&B Engineers and Contractors
Mont Belvieu, Texas
10.2019 - 03.2021
  • Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Installed supports from ceiling joists to secure pipes in place.
  • Observed safe work rules and utilized fall protection and PPE.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Used valve keys and wrenches to turn valves and shut off water from pipe sections.
  • Drilled and tapped holes for installation of studs.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Filled piping systems with water and air to test for leaks.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Verified and gathered measurements to determine proper piping sizes.
  • Inspected installed systems using hydrostatic testing or pressure gauges.
  • Using blueprints, laid out scale drawings of pipe systems and supports.
  • Threaded and installed pipe using pipe wrench and dies.
  • Threaded pipes using specified machinery.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Measured and marked pipes for cutting and threading.
  • Perform routine maintenance on equipment such as checking fluid levels or replacing gaskets when necessary.
  • Install supports for pipes to keep them in place during installation process.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Tested plumbing systems for leaks using air and water pressure gauges.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.

Pipefitter

RCI
Port Arthur, Texas
05.2017 - 07.2019
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Installed supports from ceiling joists to secure pipes in place.
  • Observed safe work rules and utilized fall protection and PPE.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Used valve keys and wrenches to turn valves and shut off water from pipe sections.
  • Drilled and tapped holes for installation of studs.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Filled piping systems with water and air to test for leaks.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Verified and gathered measurements to determine proper piping sizes.
  • Using blueprints, laid out scale drawings of pipe systems and supports.
  • Threaded and installed pipe using pipe wrench and dies.
  • Threaded pipes using specified machinery.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Measured and marked pipes for cutting and threading.
  • Perform routine maintenance on equipment such as checking fluid levels or replacing gaskets when necessary.
  • Install supports for pipes to keep them in place during installation process.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Cut or threaded pipes to blueprint or drawing specifications.
  • Operated equipment and machinery according to safety guidelines.

Education

Associate of Arts - Mathematics, Science.

National College
Calicut, Kerala India
06-1979

High School Diploma -

St.Sebastian's High School
Kerala India
03-1977

Skills

  • Worksite safety
  • Material selection
  • Piping installations
  • Pipe hanger installation
  • Pipe bending
  • Blueprints and specifications
  • Material prepping
  • Pipe cutting
  • Hand and power tools
  • Materials selection
  • Pipe fabrication
  • Pipefitting
  • Material cutting
  • Valve installation
  • Safety procedures
  • Threaded pipe fabrication
  • Cutting and threading
  • Pipe threading
  • Pipe measuring
  • Industrial piping
  • Leak detection

Training and Certificates.

  • Industrial Training Certificate (Fitter)from National Council for Vocational Training (NCVT).
  • Apprentice training in Indian Space Research Center (ISRO) at VSSC Trivandrum, Kerala, India.
  • Industrial Piping NCCER PLUS.

Timeline

Pipefitter

Zachry Industrial
03.2023 - 12.2024

Pipefitter

Bechtel
06.2021 - 01.2023

Pipefitter

S&B Engineers and Contractors
10.2019 - 03.2021

Pipefitter

RCI
05.2017 - 07.2019

Associate of Arts - Mathematics, Science.

National College

High School Diploma -

St.Sebastian's High School

Similar Profiles

CREATE PROFILE
John Abraham Kalampukatt