John Adame
Deer Park,TX
Summary
Experienced Instrument Technician with a strong background in maintaining safe work practices, including the verification of lock out tag out procedures. Proficient in the demonstration, replacement, and troubleshooting of various electrical components such as motors, transformers, and switchgears to ensure optimal equipment functionality. Skilled in performing loop checks and system calibrations on instruments and valves, effectively communicating with operations personnel to validate device performance. Knowledgeable in the calibration and specification checks of industry-standard transmitters and valves, contributing to successful field installations.
Overview
6
6
years of professional experience
Work History
I/E Technician
Group One Industrial
La Porte, Texas
01.2025 - Current
- Maintain safe work practices by verifying lock out tag out procedures have been put into practice before beginning work
- Demo, replace and troubleshoot motors, start stops, HOA’s, 480v transformers, switchgears, breakers, to make sure equipment is functioning properly
- Voltages consist of 24, 120, 270 and 480
- Demo, replace and troubleshoot flow meters, transmitters, relays, A/O,A/I, D/O and D/I cards/points to make sure equipment is functioning properly
- Replace pumps, flanges, orifice plates, gaskets, blinds, and hand valves
Instrument Technician
ISC
Leag, Texas
09.2023 - 12.2024
- Bench cal and spec check masonellian and fisher valves for preparation of installation in the field
- Bench cal and spec check rosemount transmitters such as flow, pressure and temperatures for preparation of installation in the field
- Perform loop checks on instruments and valves by communicating with board ops by witnessing or performing a 5 point check on all devices
- The ability and knowledge to communicate with trex, 789, 475, Honeywell devices, high pressure, low pressure pumps and pie cal
- Provide support for board and engineers during start up and commissioning
- Perform point to point check to ensure all termination points are in its designate location according to loop drawings
Instrument Technician
Hawk Performance
Borger, Texas
02.2023 - 09.2023
- Perform diagnostics and root cause analysis to evaluate malfunctions on valves and transmitters
- Responded quickly to emergency situations from engineers involving malfunctioning instruments, valves and process control issues
- Trouble shoot HOA’s and start stop switches to ensure properly working
- Configured communication networks between field devices, PLC’s na d DCS
- Calibrated, tested and adjusted Honeywell and rosemount transmitters to ensure accurate readings using trex, 789, 475, pie cal, high pressure and low pressure pump
- Tested and calibrated fire eyes to ensure proper reading according to engineers
Instrument Technician
Prime Controls
Houston, Texas
06.2022 - 01.2023
- Capable of understanding and the ability to program rosemount and Honeywell transmitters using Trex, 475, and Honeywell devices
- Repaired and replaced valves and components associated with valves such as solenoids, regulators and I/Ps
- Calibrated and tested fisher and masonellain valves to ensure accurate readings according to engineers
- Perform point to point check by ohmimg out wires to ensure wires are properly tagged and in its proper location according to loop drawings
- Maintain safe and clean work environment at all times by following plant rules and regulations
Electrical QC Inspector
Bilfinger Industrial Services
La Porte, Texas
01.2022 - 06.2022
- Visually inspecting electrical and instrument installations which include motors, transmitters, valves, conduit, cable tray, grounding , lights and receptacles
- Ensuring all devices and equipment are ready to sale off to client by performing loop checks, point to point checks, megging , ohmmimg, verifying rotation on motors and accurate installation locations according to specs
- Ensure testing and testing results are in compliance with IFC drawings standards and codes
- Create loop folders for valve and instrument installations
Electrician
Contech Controls
La Porte, Texas
08.2019 - 01.2022
- Installed raceways of conduit and cable tray for electrical and instrument installations
- Terminate and trouble shoot PLC’s, motors, DCS, jboxes ,lights , transformers, switchgears , breakers , disconnects, start stops , HOA’s, transmitters, and receptacles according to specs and loop drawings
- Install, cad weld, and terminate grounds for grounding grids according to specs and drawings
- Pull various type of cables through raceways for electrical and instrument installations Terminate
- Provide support during start up and commissions
Education
NCCER#13837694
NCCER Certified Electrician And Instrument Tech
Skills
- Electrical troubleshooting
- Loop checking
- System calibration
Timeline
I/E Technician
Group One Industrial
01.2025 - Current
Instrument Technician
ISC
09.2023 - 12.2024
Instrument Technician
Hawk Performance
02.2023 - 09.2023
Instrument Technician
Prime Controls
06.2022 - 01.2023
Electrical QC Inspector
Bilfinger Industrial Services
01.2022 - 06.2022
Electrician
Contech Controls
08.2019 - 01.2022
NCCER#13837694
NCCER Certified Electrician And Instrument Tech