John Arsenault
Rochester,NY
Overview
23
23
years of professional experience
4002
4002
years of post-secondary education
1
1
Certification
Work History
Lead Maintenance Mechanic
Eastman Kodak Company
Rochester, NY
10.2022 - Current
- Troubleshoot and repair and toner equipment
- Preventative maintenance on 3 phase 480 volt motors
- Replace and rewire faulty motors
- Troubleshooting sub panel boxes\
- Troubleshooting junction boxes
- Preventative maintenance on pulverizers,packaging machine and equipment( tape
- machines,labelers, ink jets
- General building audits, inspections and maintenance
- Replace and rewire faulty motors and k-trons
- Preventative maintenance and troubleshooting on compounders
- Preventative maintenance and troubleshooting on, blenders
Maintenance Technician
C&W Services
Ro330chester, New York
06.2022 - 10.2022
- Troubleshoot and repair conveyors
- Preventative maintenance on 3 phase 480 volt motors
- Replace and rewire faulty motors
- Troubleshooting sub panel boxes\
- Troubleshooting junction boxes
- Preventative maintenance on roller, drive bans for conveyors
- Repair u boat carts (wheels,side panels,brakes)
- General building audits, inspections and maintenance
- Conducted regular safety checks to ensure compliance with OSHA standards.
- Installed new pumps, compressors, boilers and other mechanical systems.
Head Mechanic
All-Star Imports
Canandaigua, New York
12.2018 - 04.2020
- ● Make sure all the supplies needed in shop we're stocked
- ● Responsible for ordering parts for vehicles
- ● Buying cars from auctions to sell on lot
- ● Repairing cars to sell on lot
- ● Min● Change tire with tire bars
- ● Replace alternators, water pumps,fan clutches on diesel motors
- ● Pm on all fleet vehicles,machinery
- ● Fabricate and weld repairing I'm trucks trailers and machinery
- September 2016 to December 2018
- C&c automotive 230 Scottsville rd
- B tech with strong diagnosis skills
- ● Motor rebuilds and replacement
- ● Transmission service and replacement
- ● Clutch insulation
- ● Brakes
- ● All aspects of suspension
- ● Diagnose check engine lightS
- ● Test drives diagnose and repair most foreign and domestic vehicles
- December 2018 to April 2020
- All-star imports 2335 state rte 21 Canandaigua New York 14424
- Head mechanic
- ● Make sure all the supplies needed in shop we're stocked
- ● Responsible for ordering parts for vehicles
- ● Buying cars from auctions to sell on lot
- ● Repairing cars to sell on lot
- ● Minor fabricating and welding
B-tech/with strong diag skills
C&C Automotive
Rochester, New York
09.2016 - 12.2018
- ● Motor rebuilds and replacement
- ● Transmission service and replacement
- ● Clutch insulation
- ● Brakes
- ● All aspects of suspension
- ● Diagnose check engine lightS
- ● Test drives diagnose and repair most foreign and domestic vehicles
Diesel/Heavy Equipment Repair Mechanic
JC Fibers
Rochester, New York
04.2016 - 09.2016
- Utilized hoisting devices such as jacks and lift trucks to position machines for repair work.
- Kept accurate records of all services performed on each piece of machinery for future reference.
- Conducted tests after completing repairs in order to verify that the machine was operating correctly.
- Assisted with rigging operations to move large machinery components safely into place for repair or replacement.
- Ordered parts from suppliers to complete repairs when necessary.
- Troubleshooted and repaired heavy equipment such as bulldozers, cranes, excavators, and loaders.
- Performed welding operations on metal structures as needed during repairs or fabrication projects.
- Disassembled damaged components to assess damage level before determining best course of action for repair or replacement needs.
- Installed new parts according to manufacturer specifications.
- Wrote detailed reports about service performed including cost estimates for customer review prior to completion of job.
- Adjusted settings on control panels to ensure optimal performance of the machine's operation.
- Repaired electrical systems including wiring harnesses, sensors and switches.
- Fabricated missing parts by cutting, shaping, forming and joining materials according to blueprints or instructions provided by customer orders.
- Cleaned and lubricated moving parts of the machine during maintenance activities.
- Maintained a clean workspace throughout the duration of each project.
- Rebuilt engines and fuel injection systems for various types of heavy equipment.
- Replaced worn or defective components in engines, transmissions, hydraulic systems, brakes and other assemblies.
- Performed regular maintenance on heavy equipment to ensure proper working order.
- Provided technical support to customers who were experiencing problems with their heavy equipment.
- Diagnosed mechanical issues using specialized tools and computerized diagnostic software.
- Inspected machines for safety risks before performing repairs or maintenance tasks.
- Disassembled equipment using hand tools and hoists to begin repair work.
- Kept accurate records of all machine and equipment repair work that had been performed.
- Assessed equipment to determine cause of issue or malfunction and identified appropriate repairs.
Construction Skilled Laborer
JTK Home Improvements
Webster, New York
04.2015 - 09.2016
- ● Demo bathroom or kitchen
- ● Replace water supply lines to sink and or shower
- ● Replace electrical outlets with gfi's replace switches
- ● Tile floors and walls for shower and bathroom floor
- ● Install new vanity, mirror, faucets
- ● Hang drywall
Machine Operator
Rotational Dynamics
Spencerport, New York
01.2015 - 08.2015
- ● Responsible for running CNC lathe
- ● Make offsets to keep parts intolerance
- ● Check Dimension Of parts to ensure they are within tolerance
- ● Complete in process report
- ● Deburr part to print
- ● set up machine for nextjob
- ● Conduct preventive maintenance on the machine (oil,lube and violent refill & replacement)
Mechanic
Brads Trailer service
Rochester, New York
04.2011 - 01.2015
- ● Repaired, replaced and adjusted brakes and brake pads.
- ● Tested vehicles and their components and systems.
- ● Operated equipment such as infrared engine analyzers, compression gauges and computerized diagnostic devices.
- ● Adjusted repaired systems to meet manufacturers' performance specifications. Conducted routine and scheduled maintenance services such as oil changes, lubrication and tune-ups.
- ● Communicated effectively with customers on future problems and repairs that might need to be addressed.
- ● Reviewed work orders and discussed them with supervisors.
- ● Safely used all hand and power tools, including the T-stripper, T-cutter, torque and wrench.
- ● Completed routine maintenance to prevent future breakdowns.
- ● Inflated tires on a test machine and adjusted controls to simulate road conditions.
- ● Interfaced with management and colleagues in a professional manner. Upheld top-quality workmanship and excellent customer service.
- ● Diagnosed computer and electrical failure with appropriate testing equipment.
Machine Operator
VI Manufacturing
Webster, New York
05.2009 - 05.2012
- ● Laid out and set up work area quickly
- ● Worked directly from blueprints, patterns, sketches and specifications.
- ● Operatedheavy duty lathes, boring machines and mills, planers, shapers and grinders.
- ●Overhauled heavy machinery such as pumps, fans, governors and gear reducers.
- ●Operated forklifts, hoists and other material handling equipment.
- ● Adhered to all safety protocols and safe work practices to reduce likelihood of injury.
- ● Developed an effective preventative maintenance schedule for all shop equipment.
- ●Studied blueprints, work instruction, sketches, drawings and manuals to determine dimensions and tolerances.
- ● Selected, aligned and secured holding fixtures, cutting tools, attachments, accessories and materials on [machine type].
- ● Detected and reported malfunctions and out-of-tolerance machining.
- ● Used CNC and manual equipment to perform rough and finishing machining.
- ● Assembled and set various boring, slotting and turning heads.
- ● Interpreted drawings and planed work in proper operational sequence on multi-cut jobs.
- ● Removed burrs on all machined parts.
- ● Manufactured piping connections, applied pressure, detected leaks and removed excess metal.
- ● Lubricated parts and performed minor maintenance to improve machine function.
- Routinely monitored the feed and speed of machines during the machining process.
Skilled Laborer
Town Of Webster Highway Dept.
Webster, NY
10.2005 - 01.2009
- ● Dug trenches, backfilled holes and compacted earth to prepare for new construction.
- ● Applied caulk, sealants and other agents to installed surfaces.
- ● Mixed porridge of catch basins and poured and sawed off concrete and asphalt.
- ● Monitored inventory and reported items to be restocked for each job.
- ●Conducted hydrostatic water testing.
- ● Consistently assumed additional responsibilities and worked extended hours to meet project deadlines.
- ● Cleared drains and downspouts and cleaned gutters.
- ● Prepared and cleaned construction sites by removing debris.
- ● Operated equipment such as case loaders, holland backhoe,6&10 wheel dump trucks and wood chippers, chain saws
- ● Removed damaged tile, brick and mortar.
- ● Filled chipped, cracked and broken bricks and tiles with adhesives and grouting materials to correct surface imperfections.
- ● Aided crews in joining, wrapping and sealing sections of pipe.
- ● Installed waterworks, locks and dams.
Machine Operator
Chamtek mfg.
Rochester, New York
08.2002 - 10.2005
- ● Laid out and set up work area quickly?
- ● Worked directly from blueprints, patterns, sketches and specifications.
- ● Operated heavy duty lathes, boring machines and mills, planers, shapers and grinders.
- ● Operated forklifts, hoists and other material handling equipment.
- ● Adhered to all safety protocols and safe work practices to reduce likelihood of injury.
- ● Developed an effective preventative maintenance schedule for all shop equipment.
- ● Studied blueprints, work instruction, sketches, drawings and manuals to determine dimensions and tolerances.
- ● Selected, aligned and secured holding fixtures, cutting tools, attachments, accessories and materials on bridgeports,tree & fanuc machines.
- ● Used CNC and manual equipment to perform rough and finishing machining.
- ● Assembled and set various boring, slotting and turning heads.
- ● Interpreted drawings and planed work in proper operational sequence on multi-cut jobs.
- ● Removed burrs on all machined parts.
- ● Lubricated parts and performed minor maintenance to improve machine function. Routinely monitored the feed and speed of machines during the machining process.
Education
Thomas Edison High School
Rochester, New YorkGreece Adult Education Center
Greece , nySkills
- CNC machine operation
- Knowledge of gear boxes
- Efficient troubleshooter
- Sawing and sanding
- Chain drives
- Mechanical drawing interpretation
- Troubleshooting
- Caliper use
- Fanuc controls
- Quality control analysis
- Keen manual dexterity
- Large lathe operation
- Metal Fabricating
- Welding
- Oxygen acetylene torches
- Diagnostics knowledge
- Collision repair
- Exhaust systems
- Fuel ignition repair
- Air conditioning systems
- Heavy equipment operation
- CNC machine operation
- Knowledge of gear boxes
- Efficient troubleshooter
- Sawing and sanding
- Chain drives
- Mechanical drawing interpretation
- Troubleshooting
- Caliper use
- Fanuc controls
- Quality control analysis
- Keen manual dexterity
- Large lathe operation
- Metal Fabricating
- Welding
- Oxygen acetylene torches
- Diagnostics knowledge
- Collision repair
- Exhaust systems
- Fuel ignition repair
- Air conditioning systems
- Heavy equipment Operation
Certification
- Forklift certified
- LOTO Certified
Timeline
Lead Maintenance Mechanic
Eastman Kodak Company
10.2022 - Current
Maintenance Technician
C&W Services
06.2022 - 10.2022
Head Mechanic
All-Star Imports
12.2018 - 04.2020
B-tech/with strong diag skills
C&C Automotive
09.2016 - 12.2018
Diesel/Heavy Equipment Repair Mechanic
JC Fibers
04.2016 - 09.2016
Construction Skilled Laborer
JTK Home Improvements
04.2015 - 09.2016
Machine Operator
Rotational Dynamics
01.2015 - 08.2015
Mechanic
Brads Trailer service
04.2011 - 01.2015
Machine Operator
VI Manufacturing
05.2009 - 05.2012
Skilled Laborer
Town Of Webster Highway Dept.
10.2005 - 01.2009
Machine Operator
Chamtek mfg.
08.2002 - 10.2005
Thomas Edison High School
Greece Adult Education Center