John Deleon

• Performed preventive maintenance on pumps, motors and related equipment.
• Diagnosed mechanical problems with pumps and other related equipment.
• Repaired pumps, motors and related equipment according to manufacturer's instructions.
• Replaced worn or damaged parts in pumps, motors and related equipment.
• Repaired seals on various types of pumps including centrifugal, reciprocating and turbine models.
• Conducted routine inspections of pumping systems to detect potential problems before they occur.
• Disassembled machinery to remove parts and make repairs.
• Adjusted and repaired systems to meet manufacturers' performance specifications.
• Assisted in the installation of new pumps, motors and associated components.
• Performed regular maintenance and troubleshooting on alignment equipment.
• Diagnosed mechanical issues, identified root causes, and developed solutions.

• Disassembled machinery to remove parts and make repairs.
• Engaged in troubleshooting of machinery malfunctions through use of testing instruments and observation of defective equipment, listening and visually analyzing for sources of problems.
• Facilitated optimal efficiency in machinery with thorough cleaning, lubricating and adjustment of components.
• Assessed system operations to identify potential areas requiring maintenance services.
• Analyzed machine error messages and diagnostic test results to identify faults.
• Adjusted and repaired systems to meet manufacturers' performance specifications.
• Understood and followed oral and written directions.
• Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
• Identified needs of customers promptly and efficiently.

• Perform maintenance and small repairs on drilling rig equipment
• Daily inspections on equipment to ensure that there are no damages
• maintain the rigs generators that run the rig
• assist the pusher and company man with daily jobs
• maintain the floor hands and make sure they stay busy and working
• operate heavy equipment
• maintain the Diesel and make sure everything is topped off

• Performed pipe fabrication, installation and fitting according to proper specifications.
• Identified and located required tools prior to starting each project.
• Cut and beveled piping using cutting torches, saws and threading machines.
• Installed and inspected new and existing plumbing lines up to 15 inches in diameter.
• Operated tools and equipment such as hand saws, pipe cutters and drills on daily basis.
• Maintained neat and well-organized worksites by removing debris and sharp objects and cleaning up after shift.
• Arranged supplies needed for individual plumbing jobs and unloaded truck upon arrival.
• Filled piping systems with water and air to test for leaks.
• Cut openings in walls and floors to accommodate pipe and pipe fittings.
• Performed rigging and forklift operations to maneuver parts and machinery.
• Carefully inspected worksites to determine presence of any obstructions, unsafe conditions and crew errors.
• operated equipment to be able to dig trenches and remove material

• Removed, washed and polished empty glasses, took plates to kitchen and discarded trash.
• Maintained spotless, well-stocked bar organized and ready for customer demands.
• Replenished bar glasses, garnishes and condiments.
• Took food and drinks to bar and table customers.
• Maintained detailed inventory of bar supplies and stocked work areas.
• Studied bartenders to learn recipes for different mixed cocktails.
• Monitored patron alcohol consumption to encourage safety.
• Resolved conflicts and restrained patrons from getting into fights.
• Verified IDs for legal age prior to admission into premises.
• Confirmed people were not visibly intoxicated prior to entering premises.
• Refused admission to known troublemakers.
• Inspected each person to check for weapons or contraband before entering premises.
• Provided friendly and professional assistance to employees, visitors and customers.
• Monitored building and property entrances and exits to detect intrusions and protect assets.

• Dismantled equipment to and cleaned or performed regular maintenance.
• Transported equipment from one job site to another.
• Safely operated forklift and aerial lift to move machinery around floor.
• Worked on job sites and assigned locations, installing and repairing pipes, valves and pumps.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.

• Maintained clean and hazard-free work areas to attain operational safety and regulatory compliance.
• Assisted with setting up and taking down drilling rig and various equipment.
• Obtained proper permits and completed job safety analysis (JSA) prior to beginning each new job.
• Transported, equipment and materials utilized for assembling drilling tool.
• Organized efficient daily work plans based on oral instructions and written directions to meet challenging objectives.
• Protected company inventory by maintaining and organizing storage areas.
• Followed company policies by performing thorough equipment inspections prior to and after each shift.
• Cleaned and organized work areas and maintained tools and equipment.

• Maintained clean and hazard-free work areas to attain operational safety and regulatory compliance.
• Assisted with setting up and taking down drilling rig and various equipment.
• Obtained proper permits and completed job safety analysis (JSA) prior to beginning each new job.
• Organized efficient daily work plans based on oral instructions and written directions to meet challenging objectives.
• Protected company inventory by maintaining and organizing storage areas.
• Promoted worksite safety by adhering to all OSHA requirements and resolving hazards.
• Cleaned and organized work areas and maintained tools and equipment.
• make the connections of drill pipe to be lowered/drilled into the ground

I did not work here long due to the safety of the employees . equipment to make connections was not safe and was not in good condition.

• Removed, washed and polished empty glasses, took plates to kitchen and discarded trash.
• Maintained spotless, well-stocked bar organized and ready for customer demands.
• Replenished bar glasses, garnishes and condiments.
• Took food and drinks to bar and table customers.
• Maintained detailed inventory of bar supplies and stocked work areas.
• Monitored patron alcohol consumption to encourage safety.
• Verified IDs for legal age prior to admission into premises.
• Resolved conflicts and restrained patrons from getting into fights.
• Confirmed people were not visibly intoxicated prior to entering premises.
• Refused admission to known troublemakers.
• Inspected each person to check for weapons or contraband before entering premises.
• Monitored building and property entrances and exits to detect intrusions and protect assets.
• Warned violators of rule infractions and escorted unauthorized persons off premises.

• Worked closely with structural ironworkers, ornamental Ironworkers, riggers and machinery movers, enabling clear and safe cross-functional operations.
• Studied blueprints, drawings and specifications to determine layout of work.
• Received structural steel and moved it to modular locations.
• Safely used metal shears, hacksaws, bar cutters and other tools to cut metal components for installation.
• Determined safety risks associated with projects and implemented precautions to address risks.

• Arranged construction materials according to project needs.
• Adhered to all reporting standards for safety issues.
• Conveyed instructions to equipment operators for smooth operations.
• Removed oil spills and performed general cleaning duties to keep units tidy and safe.
• Inspected pipelines, tightened connections and lubricated valves.
• chunked skids for layout of pipe
• pipe gang making connections of pipe to lower into ground

• Transported hydroblaster machine, hoses and chemicals to assigned site, set up equipment and inspected before and after use.
• Completed each assigned cleaning project on schedule, including cleanup of equipment and environment.
• Removed hazardous materials safely, including chemical tanks and towers after first analyzing and alleviating safety risks.
• Inspected cleaned surfaces and equipment with customers upon project completion to verify customer satisfaction with cleaning effort.
• Performed basic diagnostics and repairs on hydroblasting and vacuum equipment and recommended solutions for complicated repairs.
• Trained and mentored new technicians on safe, effective and productive use and maintenance of equipment after being appointed lead technician.
• Used all equipment and power tools safely to avoid accidents and job site mishaps.
• Hauled supplies to work locations and organized professionally for easy use.

• Transported hydroblaster machine, hoses and chemicals to assigned site, set up equipment and inspected before and after use.
• Completed each assigned cleaning project on schedule, including cleanup of equipment and environment.
• Removed hazardous materials safely, including chemical tanks and towers after first analyzing and alleviating safety risks.
• Inspected cleaned surfaces and equipment with customers upon project completion to verify customer satisfaction with cleaning effort.
• Performed basic diagnostics and repairs on hydroblasting and vacuum equipment and recommended solutions for complicated repairs.
• Trained and mentored new technicians on safe, effective and productive use and maintenance of equipment after being appointed lead technician.
• Used all equipment and power tools safely to avoid accidents and job site mishaps.
• Hauled supplies to work locations and organized professionally for easy use.