John Pruitt II

• Assisted electricians with installation of electrical systems and components.
• Followed safety protocols while using hand and power tools.
• Supported team in troubleshooting electrical issues on job sites.
• Observed experienced electricians to learn best practices in the field.
• Helped with wiring, panel installation, and circuit testing tasks.
• Maintained tools and equipment to ensure reliability and safety.
• Measured, cut and bent wire and conduit using hand tools and power tools.
• Organized work areas to promote efficiency and minimize hazards.
• Participated in daily site meetings to discuss project progress and safety.
• Installed electrical wiring and fixtures, such as outlets, switches, circuit breakers, junction boxes and wall sockets.
• Installed lighting fixtures such as fluorescent bulbs or LED lights.
• Assisted with electrical installation tasks, added new wiring, and adjusted breaker boxes.
• Gathered required tools and equipment for each task to increase efficiency.
• Kept work areas clean, neat, and free of hazards.
• Kept work areas clean, neat, and organized for efficient operations.
• Performed general maintenance on electrical systems including replacing worn parts and repairing faulty wiring.
• Dug trenches and created holes to pull conduit and install supports.
• Worked in team-based environment to accomplish projects.
• Supported journeyman and master electricians in maintaining, operating and repairing electrical systems.
• Adhered to company standards and OSHA regulations for work site safety.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Maintained organization, cleanliness, and safety in work areas.
• Followed relevant electrical and building codes for each job.
• Listened to directives of senior electrical professionals to complete efficient tasks.
• Assisted in troubleshooting problems with various types of control systems.
• Built controllers and panels to complete system installations.
• Adhered to company policies regarding the use of personal protective equipment.
• Ran conduit pipes through walls for the installation of new wiring systems.
• Installed and connected electrical wiring, conduits, fixtures, heating systems and air-conditioning equipment according to blueprints or specifications.
• Installed conduit systems for power distribution.
• Performed physical labor tasks including bending, lifting, and carrying heavy materials on job sites. including bending, stooping, lifting, carrying heavy loads, and standing for long periods of time.
• Installed conduit systems, various lighting systems, and basic control systems.
• Measured, cut and bent conduit pieces to specified shapes using hand tools or machines.
• Installed and connected electrical cables, wires, and conduit systems to equipment components in accordance with local regulations.
• Fabricated conduit runs in accordance with NEC regulations and local codes.
• Pulled insulated wires or cables through conduits to complete circuits.
• Installed pipes and conduits in underground trenches with the help of a backhoe or crane.
• Inspected underground conduit systems prior to installation of new cables.
• Measured, cut, bent, threaded and installed conduit with appropriate fittings to run wiring.
• Ran conduit pipes through walls and ceilings in accordance with local codes and regulations.
• Pulled wire through conduit and installed junction boxes and other components as required.
• Installed conduit for new construction projects.
• Installed electrical wiring, conduits, and fixtures in accordance with applicable codes.

• Assisted electricians with installation of electrical systems and components.
• Followed safety protocols while using hand and power tools.
• Supported team in troubleshooting electrical issues on job sites.
• Maintained tools and equipment to ensure reliability and safety.
• Helped with wiring, panel installation, and circuit testing tasks.
• Observed experienced electricians to learn best practices in the field.
• Participated in daily site meetings to discuss project progress and safety.
• Organized work areas to promote efficiency and minimize hazards.
• Measured, cut and bent wire and conduit using hand tools and power tools.
• Installed electrical wiring and fixtures, such as outlets, switches, circuit breakers, junction boxes and wall sockets.
• Installed lighting fixtures such as fluorescent bulbs or LED lights.
• Assisted with electrical installation tasks, added new wiring, and adjusted breaker boxes.
• Gathered required tools and equipment for each task to increase efficiency.
• Kept work areas clean, neat, and free of hazards.
• Kept work areas clean, neat, and organized for efficient operations.
• Performed general maintenance on electrical systems including replacing worn parts and repairing faulty wiring.
• Dug trenches and created holes to pull conduit and install supports.
• Worked in team-based environment to accomplish projects.
• Worked in all weather conditions and on multiple types of ladders and mechanical lifts.
• Supported journeyman and master electricians in maintaining, operating and repairing electrical systems.
• Adhered to company standards and OSHA regulations for work site safety.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Maintained organization, cleanliness, and safety in work areas.
• Followed relevant electrical and building codes for each job.
• Assembled conduits by threading ends together with couplings or clamps.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Developed comprehensive knowledge of electrical codes, principles and federal regulations.
• Transported required supplies and employees from headquarters to job site using company vehicles.
• Connected wires to circuit breakers, transformers, or other components.
• Pulled insulated wires or cables through conduits to complete circuits.
• Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
• Assisted senior electricians in more complex tasks such as cable routing or conduit bending.
• Ran conduit pipes through walls for the installation of new wiring systems.
• Installed and connected electrical wiring, conduits, fixtures, heating systems and air-conditioning equipment according to blueprints or specifications.
• Installed conduit systems for power distribution.
• Engaged in physical labor including bending, stooping, lifting, carrying heavy loads, and standing for long periods of time.
• Installed conduit systems, various lighting systems, and basic control systems.
• Measured, cut and bent conduit pieces to specified shapes using hand tools or machines.
• Installed and connected electrical cables, wires, and conduit systems to equipment components in accordance with local regulations.
• Fabricated conduit runs in accordance with NEC regulations and local codes.
• Installed conduit systems for wiring of instruments and other electrical devices.
• Installed pipes and conduits in underground trenches with the help of a backhoe or crane.
• Inspected underground conduit systems prior to installation of new cables.
• Measured, cut, bent, threaded and installed conduit with appropriate fittings to run wiring.
• Ran conduit pipes through walls and ceilings in accordance with local codes and regulations.
• Pulled wire through conduit and installed junction boxes and other components as required.
• Ran conduit paths to install new cables in accordance with local building codes.
• Installed conduit for new construction projects.
• Installed electrical wiring, conduits, and fixtures in accordance with applicable codes.
• Cut holes into walls for running conduit pathways between rooms or buildings.
• Installed conduit, wiring, fixtures, switches, outlets, control panels, motors, transformers. as needed for projects.
• Cut damaged sections of pipe using conduit cutters, replacing broken sections using pipe sleeves.
• Ran conduit and pulled wire through walls, ceilings, or floors of buildings.
• Performed physically demanding tasks such as digging trenches to lay conduit and moving and lifting heavy objects.
• Installed conduit for new wiring systems in commercial buildings.
• Installed conduit pipes, junction boxes, light fixtures, outlets, circuit breakers.
• Assembled conduit pipe sections using hand tools such as wrenches, pliers and screwdrivers.
• Installed conduit systems for running wires in walls or ceilings.
• Installed conduit systems including bends, offsets risers utilizing hand benders or motorized bending machines as required by the job specs.
• Dug trenches to lay conduit, lifted heavy objects and performed other physically-demanding tasks to complete projects.
• Measured distances accurately with tape measures in order to properly lay out conduit runs.
• Installed conduit systems for new construction projects and remodels in residential homes.
• Measured and marked cutting and bending lines according to instructions.
• Measured, cut and bent conduit using hand tools such as pipe benders and saws.
• Installed conduit for new wiring runs, including EMT, PVC conduit, MC cable and other types of approved materials.
• Pulled wires through conduit runs using fish tapes or pull strings when necessary.
• Installed conduit, wiring, fixtures, motors and other components to code specifications.
• Measured, cut, bent and installed conduit systems used to protect electrical wiring from damage.

• Assisted electricians with installation of electrical systems and components.
• Followed safety protocols while using hand and power tools.
• Supported team in troubleshooting electrical issues on job sites.
• Maintained tools and equipment to ensure reliability and safety.
• Observed experienced electricians to learn best practices in the field.
• Participated in daily site meetings to discuss project progress and safety.
• Organized work areas to promote efficiency and minimize hazards.
• Measured, cut and bent wire and conduit using hand tools and power tools.
• Installed electrical wiring and fixtures, such as outlets, switches, circuit breakers, junction boxes and wall sockets.
• Installed lighting fixtures such as fluorescent bulbs or LED lights.
• Assisted with electrical installation tasks, added new wiring, and adjusted breaker boxes.
• Gathered required tools and equipment for each task to increase efficiency.
• Kept work areas clean, neat, and free of hazards.
• Kept work areas clean, neat, and organized for efficient operations.
• Dug trenches and created holes to pull conduit and install supports.
• Worked in team-based environment to accomplish projects.
• Worked in all weather conditions and on multiple types of ladders and mechanical lifts.
• Supported journeyman and master electricians in maintaining, operating and repairing electrical systems.
• Adhered to company standards and OSHA regulations for work site safety.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Maintained organization, cleanliness, and safety in work areas.
• Completed semi-skilled and skilled work under supervision of fully qualified professionals.
• Followed relevant electrical and building codes for each job.
• Measured and prepared supplies for electrical tasks.
• Assembled conduits by threading ends together with couplings or clamps.
• Demonstrated strong foundation of safety knowledge and implemented industry best practices.
• Connected wires to circuit breakers, transformers, or other components.
• Assisted in troubleshooting problems with various types of control systems.
• Performed installation, maintenance and tests of electrical energy systems and components by safely using all equipment and tools.
• Completed day-to-day duties accurately and efficiently.
• Contributed innovative ideas and solutions to enhance team performance and outcomes.
• Maintained updated knowledge through continuing education and advanced training.
• Collaborated closely with team members to achieve project objectives and meet deadlines.
• Assisted senior electricians in more complex tasks such as cable routing or conduit bending.
• Ran conduit pipes through walls for the installation of new wiring systems.
• Installed and connected electrical wiring, conduits, fixtures, heating systems and air-conditioning equipment according to blueprints or specifications.
• Installed conduit systems for power distribution.
• Configured conduit routing for wiring of new systems.
• Engaged in physical labor including bending, stooping, lifting, carrying heavy loads, and standing for long periods of time.
• Installed conduit systems, various lighting systems, and basic control systems.
• Measured, cut and bent conduit pieces to specified shapes using hand tools or machines.
• Installed and connected electrical cables, wires, and conduit systems to equipment components in accordance with local regulations.
• Fabricated conduit runs in accordance with NEC regulations and local codes.
• Pulled insulated wires or cables through conduits to complete circuits.
• Installed conduit systems for wiring of instruments and other electrical devices.
• Installed pipes and conduits in underground trenches with the help of a backhoe or crane.
• Measured, cut, bent, threaded and installed conduit with appropriate fittings to run wiring.
• Ran conduit pipes through walls and ceilings in accordance with local codes and regulations.
• Removed finished products from the bender machine after completion of bending processes.
• Ran conduit paths to install new cables in accordance with local building codes.
• Pulled wire through conduit and installed junction boxes and other components as required.
• Installed conduit for new construction projects.
• Installed electrical wiring, conduits, and fixtures in accordance with applicable codes.
• Cut holes into walls for running conduit pathways between rooms or buildings.
• Installed conduit, wiring, fixtures, switches, outlets, control panels, motors, transformers. as needed for projects.
• Cutting, threading and bending pipe using various hand tools or power tools.
• Cut damaged sections of pipe using conduit cutters, replacing broken sections using pipe sleeves.
• Ran conduit and pulled wire through walls, ceilings, or floors of buildings.
• Installed conduit for new wiring systems in commercial buildings.
• Installed conduit pipes, junction boxes, light fixtures, outlets, circuit breakers.
• Performed physically demanding tasks such as digging trenches to lay conduit and moving and lifting heavy objects.
• Assembled conduit pipe sections using hand tools such as wrenches, pliers and screwdrivers.
• Installed conduit systems for running wires in walls or ceilings.
• Dug trenches to lay conduit, lifted heavy objects and performed other physically-demanding tasks to complete projects.
• Measured and marked cutting and bending lines according to instructions.
• Measured, cut and bent conduit using hand tools such as pipe benders and saws.
• Assembled conduit supports such as brackets, clamps hangers and straps.
• Installed conduit for new wiring runs, including EMT, PVC conduit, MC cable and other types of approved materials.
• Pulled wires through conduit runs using fish tapes or pull strings when necessary.
• Installed conduit, wiring, fixtures, motors and other components to code specifications.
• Measured, cut, bent and installed conduit systems used to protect electrical wiring from damage.
• Assisted journeyman electricians with layout marking of wall studs prior to running conduit lines between them.
• Fabricated conduit pipes using manual threading machines.
• Assisted in the drilling of holes for pipes and conduits in walls, floors, and ceilings.

Pulled wire and terminated into panels.

• Operated heavy machinery.
• Operated container handlers
• Operated forklift
• Operated LHS
• Operated cranes
• Maintenanced all heavy machinery in the motor pool.