Jorge A. Gaona

• Supervise apprentice electricians.
• Take measurements, fabricate and install stand, supports.
• Run conduit ( Rigid and EMT), pull, dress and tie wrap cables.
• Strip, gland and terminating wires on Rio-panels, PCL, MCC, switch gears, J-boxes, motors, transformers, temporary power, start/stop switches, lighting systems, alarm systems and instrument devices.
• Perform loop instalation on various instrument and complete associated paperwork.
• Troubleshoot electrical systems and equipment.

• Running 2” and ¾” EMT conduit and routing cables to fire detectors.
• Verify cable continuity and routing from point A to point B using testing equipment.
• Run cables from breakers to DSD and Rio panels.
• Terminate both emergency and normal power systems.
• Install and work on NAC boxes for fire detectors.

• Perform terminations on motors, devices, Rio panels, PCL, MCC, disconnects, J-boxes, NAC boxes, and instrument devices.
• Assist in client and quality inspection walk-downs.
• Read blueprints, take measurements, fabricate and install stands and supports, and run conduit (EMT).
• Pull, dress, tie-wrap, strip, heat-shrink, and terminate wires on electrical systems, start/stop switches, lighting systems, and various instruments.
• Install and troubleshoot loops for different instruments and complete associated paperwork.
• Work on conveyors, including charge/discharge systems, high-temperature, and cooling conveyors.
• Perform bonding and grounding, complete punch list items, and finalize work packs for project completion.

• Supervised the terminations crew.
• Perform terminations on motors, devices, Rio panels, PCL, disconnects, MCC, switchgears, transformers, J-boxes, start/stop switches, temporary power, lighting, and alarm systems.
• Assist in client walk-downs and quality inspection walk-downs to ensure compliance and project standards.
• Read blueprints, take measurements, fabricate and install stands and supports, and run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, heat-shrink, and terminate wires, including CGBs, on a variety of electrical systems and instrument devices.
• Install and troubleshoot instrument loops and complete related documentation.
• Perform bonding and grounding of electrical systems.
  
  

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, heat-shrink, and terminate wires on Rio panels, PCL, disconnects, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, transformers, temporary power, lighting, and alarm systems.
• Shoot loops on various instruments and complete associated documentation.
• Perform troubleshooting on electrical systems and instruments.
• Execute bonding and grounding procedures.
• Complete punch list items, assist with commissioning, and finalize work pack completions.

• Install disconnects, transformers, breaker panels, and receptacles for EV charging systems.
• Take measurements and install EMT conduit from switchgear, transformers, disconnects, breaker panels, and receptacle boxes.
• Pull and terminate cables for transformers, disconnects, breaker panels, and receptacle boxes.
• Perform underground work, running PVC conduit from transformers, disconnects, and breaker panels to EV chargers.
• Pull wire and perform terminations for all above-ground and underground components.

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, heat-shrink, and terminate wires on Rio panels, PCL, disconnects, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, transformers, temporary power, lighting, and alarm systems.
• Shoot loops on instruments and complete associated documentation.
• Troubleshoot electrical systems and devices.
• Work with low and medium-voltage systems, performing bonding and grounding.
• Complete punch list items and finalize work pack completions.

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, gland, and terminate wires on Rio panels, PCL, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, transformers, temporary power, lighting, and alarm systems.
• Shoot loops on instruments and complete associated documentation.
• Perform troubleshooting on electrical systems and devices.
• Execute bonding and grounding procedures.
• Complete punch list items and finalize work pack completions.

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, gland, and terminate wires on Rio panels, PCL, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, transformers, temporary power, lighting, and alarm systems.
• Shoot loops on instruments and complete associated documentation.
• Troubleshoot electrical systems and devices.
• Perform bonding and grounding.
• Complete punch list items and finalize work pack completions.

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, gland, and terminate wires on Rio panels, PCL, disconnects, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, transformers, temporary power, lighting, and alarm systems.
• Shoot loops on instruments and complete associated documentation.
• Troubleshoot electrical systems and instruments.
• Perform bonding and grounding procedures.
• Complete punch list items and finalize work pack completions.

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, gland, and terminate wires on Rio panels, PCL, MCC, switchgears, instrument devices, alarm systems, AC dumpsters, start/stop switches, motors, J-boxes, lighting systems, and other instruments.
• Shoot loops to verify system point-to-point connections and complete associated documentation.
• Troubleshoot electrical systems and instruments.
• Perform bonding and grounding procedures.
• Complete punch list items and finalize work pack completions.

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, gland, and terminate wires on Rio panels, PCL, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, lighting systems, alarm systems, and other instruments.
• Shoot loops on instruments and complete associated documentation; perform troubleshooting.
• Perform bonding and grounding for electrical systems.
• Complete punch list items and finalize work pack completions.

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, gland, and terminate wires on Rio panels, PCL, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, transformers, temporary power, lighting, and alarm systems.
• Shoot loops on instruments, panels, and J-boxes; complete associated documentation and perform troubleshooting.
• Perform bonding and grounding for electrical systems.
• Complete punch list items, work pack completions, and assist with pre-commissioning activities.

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, gland, and terminate wires on Rio panels, PCL, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, transformers, temporary power, lighting, and alarm systems.
• Shoot loops to verify point-to-point connections on instruments, panels, and J-boxes; perform troubleshooting.
• Perform bonding and grounding for electrical systems.
• Complete punch list items and finalize work pack completions.

• Take measurements, fabricate, and install stands and supports; run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, gland, and terminate wires on Rio panels, PCL, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, transformers, temporary power, lighting, and alarm systems.
• Shoot loops to verify point-to-point connections on instruments, panels, and J-boxes; perform troubleshooting.
• Execute bonding and grounding procedures.
• Complete punch list items and finalize work pack completions.

• Take measurements, fabricate and install stands and supports, and run conduit (Rigid and EMT).
• Pull, dress, tie-wrap, strip, gland, and terminate wires on Rio panels, PCL, MCC, switchgears, instrument devices, start/stop switches, motors, J-boxes, transformers, temporary power, lighting, and alarm systems.
• Shoot loops to verify point-to-point connections and perform troubleshooting on electrical systems.
• Perform bonding and grounding for electrical systems.
• Complete punch list items, work pack completions, and assist with pre-commissioning activities.

• Install conduits, cable trays, channel trays, snap trays, panels, lighting panels, transformers, instrumentation panels, lighting fixtures, and receptacles.
• Pull wire through conduits and perform terminations on lights and receptacles.
• Install heat trace cables, junction boxes (JBs), packing seals, and underground wiring.
• Perform grounding and bonding for electrical systems.
• Complete punch list items to ensure project quality and compliance.
• Operate forklifts to assist with material handling and installation tasks.

• Perform pre-commissioning activities and complete punch list items.
• Install conduits, cable trays, channel trays, snap trays, panels, lighting panels, transformers, instrumentation panels, lighting fixtures, and receptacles.
• Pull wire through conduits and perform terminations on lights and receptacles.
• Install heat trace cables, junction boxes (JBs), and packing seals.

• Serve as Material Coordinator in the electrical material conex area.
• Install conduits, cable trays, channel trays, snap trays, panels, lighting panels, transformers, instrumentation panels, lighting fixtures, and receptacles.
• Pull wire through conduits and perform terminations on lights, receptacles, motors, and instrumentation devices.
• Install heat trace cables, junction boxes (JBs), and packing seals.
• Perform troubleshooting on instruments, panels, and JBs, and shoot loops to verify point-to-point connections.
• Complete punch list items to ensure project quality and compliance.

• Conduct equipment inspections and serve as Material Coordinator in the electrical material conex area.
• Install conduits, cable trays, channel trays, snap trays, panels, lighting panels, transformers, instrumentation panels, lighting fixtures, and receptacles.
• Pull wire through conduits and perform terminations on lights and receptacles.
• Complete punch list items, shoot loops, and assist with pre-commissioning activities.

• Install conduits (EMT, MT, Plasti-bond, Rigid) and supporting structures.
• Install cable trays, channel trays, snap trays, panels, lighting panels, transformers, instrumentation panels, lighting fixtures, and receptacles.
• Pull wire through conduits and perform terminations on lights, receptacles, motors, and instrumentation devices.

• Install conduits, cable trays, channel trays, and snap trays.
• Install panels, lighting panels, transformers, instrumentation panels, lighting fixtures, and receptacles.
• Pull wire through conduits and perform terminations on lights and receptacles.
• Perform grounding and bonding for electrical systems.
• Shoot loops to verify point-to-point connectivity.

• Complete punch list items to ensure project quality and compliance.
• Install conduits, cable trays, channel trays, and snap trays.
• Install panels, lighting panels, transformers, instrumentation panels, lighting fixtures, and receptacles.
• Pull wire through conduits and perform terminations on lights and receptacles.
• Shoot loops to verify point-to-point connectivity.

• Collaborate with commissioning teams in the field; shoot loops to verify point-to-point connections.
• Troubleshot various instruments, panels, and electrical systems.
  • Serve as Material Coordinator, managing electrical material and storage (conex).
• Install cable trays, run field cable layouts, and perform grounding and bonding.
• Install transmitters, instrumentation, and junction boxes; gland and terminate cables.
• Work on lighting panels and fixtures, motor terminations, and heat trace systems (support installation and JB mounting).
• Install and maintain fire and gas systems, PA/GA systems, and other safety-critical equipment.
• Complete work packs and punch list items to ensure project completion.

• Install cable trays and pull, dress, and secure cables.
• Strip and gland CLX and marine cables for MCC panels, lighting panels, instrumentation panels, motors, compressors, and turbines.
• Work on PA/GA systems and perform megger testing on power cables before terminating.
• Terminate PRS cabinet motors, MCC, LER, and IER panels, and complete packing seals and MCT.
• Shoot loops to verify point-to-point connectivity.

• Shot studs with Hilti gun and ran cable layouts for field routes.
• Dress and secure cables; install junction boxes (JBs) and panels.
• Perform stripping, glanding, and terminations on electrical systems.
• Work on fire and gas detection systems, PA/GA systems, and outboard man switches.

• Install lighting, receptacles, panels, and conduits.
• Pull, route, and terminate cables for panels, lighting, and receptacles.
• Connect, secure, and troubleshoot fixtures, including PA systems and exit signs.

• Install conduits and pull cables for electrical systems.
• Install and terminate panels, lighting, and receptacles.
• Connect, secure, and troubleshoot fixtures, including PA systems and exit signs.

• Install cable trays and conduit, route and run cables.
• Cut, gland, and terminate cables.
• Dress and secure cables using stainless steel tie wraps for organized, code-compliant installations.

• Fabricate supports for cable trays and conduit installation.
• Pull and route cables, including heat trace systems, and wire heat trace control boxes.
• Perform terminations in power boxes and control boxes.
• Test heat trace cables using megger and ensure proper functionality.
• Install conduit and perform troubleshooting on electrical systems as needed.