Jorge Barrios
Port St Lucie ,FL
Summary
Well-qualified Quality Control Inspector proficient in documentation, reporting and compliance standards focused on performing appropriate and useful analysis of products and component materials in order to drive quality improvements in manufacturing environments.. Meticulous and methodical professional with a deep understanding of manufacturing and production operations. Bringing 14 years of related experience.
Overview
15
15
years of professional experience
Work History
QUALITY CONTROL INSPECTOR
DAHER AEROSPACE
02.2023 - 07.2024
- Assist Quality Management in planning, directing, and coordinating the work activities and resources necessary for manufacture, inspection and certification of aircraft and components (products and/or articles)
- Supervisory oversight is to be performed in accordance with company and departmental policies, with a strict adherence to applicable regulatory requirements
- Supervise inspection resources within the Quality Department; is responsible for the training and guidance of employees to ensure inspection activities are carried out in an efficient and timely manner as well as in compliance with company policies and regulatory requirements
- Proficient in MS Windows, Advanced proficiency with excel, reporting, and analysis
- Implementation of QA/QC procedure and Quality Plans
- Carrying out QC activities for Industrial coating works including review project specifications, comply with
- Inspection and Test Plan (ITP) and adhere to the related safety requirements as per the project specification
- Conversant with all nondestructive/destructive inspection instruments but not limited to Whirling Hygrometer
- Steel Temperature Gauge, Dew Point Calculator, relative humidity calculator/table, Blotter Test, Surface Profile
- Gauges, Profile Comparators, Needle Pressure Gauges, Magnetic DFT Gauges, Holiday Detectors etc
- Qualitative/quantitative testing, Sieve Analysis for Blasting Abrasive, Blotter Test, Chloride Test, Coating
- Adhesion Test, DFT measurement, Hardness Test etc
- Coordination with client representatives, Inspection agency and Sub-contractor related to all quality assurance and quality control matters
- Leading the inspection team for adherence of projects quality procedures, specifications of ongoing project including quality, safety & etc
- Planning, initial set-up of equipment, materials and instruments for projects execution
- Ensure the company’s Procedures, Project Specifications & procedures are understood and adhered to by the site personnel
- Preparation of quality control documents, verification product data sheets, MSDS and calibration certificates, preparing Weekly & Monthly Reports for Management and Clients, Weekly Meeting with Clients for Technical
- Clarification/Punch List clearance/Rectification of Deficiencies if any
- Maintain and preparation of QC documentation such as instruments calibration certificates, Material Safety
- Data Sheets, Technical Data Sheets, QC Reports, etc
- Inspection of incoming materials
- Preparation of daily painting/pinhole / holiday report and submitting for client-act as in-house inspector for all paint applications and preparation operations, monitoring each step of the process to include but not limited to air worthiness and cosmetic criteria Collaborate with engineering to develop production-ready manufacturing approach
- Review work instructions and provide recommended changes where necessary
- Interface with area managers to prioritize work based on production schedule and organizational goals
- Ensure product quality and conformance to engineering specifications
- Develop and implement cost reductions processes and efficiency improvement measures
- Implement and refine new manufacturing processes
- Work with engineering to document and standardize production processes
- Collaborate with engineering to develop production ready manufacturing approach
- Review work instructions and provide recommended changes where necessary.
PPW CONFORMITY AUDITOR
QUALITY AEROSPACE ADVISORS
10.2021 - Current
- Assist DOM in maintaining and auditing aircraft status reports, tracking systems, and online tracking systems
- Oversee and managed team of 33 individuals to ensure that they are performing effectively and satisfied in their role.
- Executed audit phases and entered data into accounting software for analysis.
- Identified control gaps in processes, procedures and systems through in-depth research and assessment and suggested methods for improvement.
- Adapted plans and schedules to meet changing priorities of work objectives, resources and workload demands.
- Coordinated, managed and implemented auditing projects and prepared for evaluation.
QUALITY INSPECTOR & PAPERWORK CONFORMITY
AERSALE NEW MEXICO
06.2021 - 10.2021
- Operated power tools, gauges and testing equipment to adjust, repair and replace faulty components in aircrafts
- Analyzed engineering drawings and schematics to troubleshoot systems and diagnose solutions
- Maintained fleet aircraft and related equipment in optimal condition and readiness
- Inspected aircraft for compliance with regulations, company standards and safety requirements
- Maintained repair logs to document all corrective and preventive aircraft maintenance
- Kept aviation ground support equipment in working condition by completing preventive and corrective maintenance tasks
- Maintained, repaired and rebuilt aircraft structures, including fuel, electrical and oxygen systems
- Inspected all received aircraft parts to verify compliance with FAA regulations.
COMPONENT SHOP INSPECTOR
AERSALE MIAMI
06.2020 - 06.2021
- Inspect paint/color quality and damages/scratches visually by compared with color swatch and previously produced plates within the specification
- Measure thickness, length, width, working width, angle, any spaces of the plate thoroughly to ensure plates are within the specification precisely by using vernier calipers and feeler gauge
- Perform destructive test
- Need to utilize cutting machine to make samples (50cm x 40 cm)
- Physical property and moisture need to be tested and sample needs to be dried before testing flexure fracture load
- Perform underwater test
- Utilize cutting machine to make samples (10cm x 10cm)
- Sample needs to be dried and weighed
- Aqua sealed sample is weighed in the water and measure density
- Perform thickness test by calculating density from measurements and weight
- Perform moisture test by weigh air dried sample, dry sample for 24-hours, weigh insensitive gravity and calculate moisture percentage
- Record all related test results and get approval from Quality Manager
- Preforms other related duties as assigned.
SHEETMETAL & COMPOSITE SHOP MANAGER
FLIGHT STAR AIRCRAFT SERVICES
06.2019 - 06.2020
- Converts & uses contractual documents, engineering drawings & technical manuals
- Time compliance Technical Order, or other technical data to provide direction in work documents to accomplish aircraft
- Aircraft production, maintenance & modification
- Uses standardized processes to resolve errors with engineering and other technical data
- Conducts concurrent review boards with production, quality, and engineering to ensure work documents are technically accurate and clearly written for technician or mechanic execution
- Conducts hangar floor checks for work document improvement opportunities
- Initiates and processes planning change requests.
SHEETMETAL MANAGER
ATS COMPONENTS
02.2019 - 06.2019
- Aircrafts Worked On: B767, B757, B737,B717,MD80/90
- A320
- Responsible for team meeting the companies and customers desired goals with satisfactory maintenance service while meeting the requirements and safety standards of the FFA
- Meet tight repair deadlines to ensure no service disruptions
- Maintain accurate records by using work order reporting systems
- Responsible for composite repairs including minor and major RII Items (Nose to Tail) using pre-prep materials, fiber glass ,kevlar, carbon fiber and basic resin(EA50A-9396-9390-3804-1305-934) +(BMS materials)
- Preform damage evaluations and Provide necessary repair data to the team using Manuals like
- SRM,AMM,IPC,CMM , assembles, pre-fits, bonds a variety of metal, composite or laminate fabrications, assemblies, parts, skins or equipment
- Metal bond repair doblers, heat treatment process for metal
- Hand and machine finish parts to required tolerances and fit into completed assemblies
- Drill, saw, file, sand, pot, patch, build up, trim, fit and parts
- Repairs on nomex honeycomb, metal core , and polyurethane
- Resin infusion molding, Polycarbonate repair
- Knowledge of, wet lay out, hot bonds, cold wrap and material Related.
BONDING ASSEMBLY SUPERVISOR
01.2018 - 01.2019
- Timing & completion of composite metallic assemblies including set up, bonding, fastener applications
- Surface preparation using grit blast, hand abrade & power abrasion techniques
- Laminate assemblies by determining proper placement of bleeders, thermocouples, probes & and vacuum connections
- Vacuum bag processing, bonding, and oven/autoclave curing
- Making basic layouts on parts or assemblies in order to establish reference points & check dimensions using calipers, micrometers, precision scales, and torque wrenches.
COMPOSITE & SHEET METAL SPECIALIST
PREMIER AVIATION
10.2016 - 12.2017
- Aircrafts Worked On: B747, B767, B757, EMB-170, EMB-175 EMB-190 A320
- Lay out perfect domination of blueprints, SRM and AMM manuals, assembles, pre-fits, bonds a variety of metal, composite or laminate fabrications, assemblies, parts, skins or equipment
- Follows engineering and manufacturing specifications and orders to determine parts to be bonded and the temperature and pressure required
- Cuts parts or materials to size
- Operates autoclave, hydraulic presses and ovens to complete the bonding cycle
- Sands, burrs and smoothed over areas
- Applies sealing resins to cut or exposed edges
- Process methods and sequences vary depending on compounds, contours and lay-up transitions, perform complicated rework or repair, monitor and verify quality in accordance with statistical process or other control procedures
- Place vacuum and pressure bags over and inside wrapped parts and tools, and test for leaks
- Cut fabrics and composite materials cutters etc
- Hand and machine finish parts to required tolerances and fit into completed assemblies
- Drill, saw, file, sand, pot, patch, build up, trim, fit and parts to meet production
- Sand, polish molds and/or bond assembly tools to obtain smooth surfaces
- Loads, unload and operate ovens in the curing of parts and assemblies
- Apply parting agents to molds and bond assembly tools
- Mix and apply bonding adhesives to details and assemblies using films, spray, pour coating, roller coating and robotics equipment
- Spay and brush priming.
COMPOSITE & SHEET METAL SPECIALIST
AAR AVIATION SERVICES
09.2016 - 10.2016
- Aircrafts Worked On: B737, B767, B757
- Replace seal retainers & corrosion removal
- Seat & track modification
- Fabrication and repairs of trims for galleys
- New fabrication of floor boards.
QUALITY CONTROL & ENGINEERING STRESS SUPPORT
ZODIAC AIRLINE CABIN
07.2016 - 09.2016
- AAircrafts Worked On: B757, B777, B767, B747
- Perform routine production assembly operations on structural and mechanical assemblies, sub-assemblies and aircraft systems, equipment and accessories using manual operations
- Select correct parts, materials, tools, assemblies, standards & hardware
- Inspect and evaluate all types of drilling, installation, fit, fasteners, & alignments
- Adjust and report the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations.
SHEET METAL SPECIALIST
FLIGHTSTAR AIRCRAFT SERVICES
01.2016 - 07.2016
- Aircrafts Worked On: B757, B737, B719, B717, MD80
- Sand & polish molds & bond assembly tools to obtain smooth surfaces
- Load, unload & operate ovens in the curing of parts and assemblies
- Mix & apply bonding adhesives to details and assemblies using films, spray, pour coating, roller coating and robotics equipment
- Flight control repair using SRM
- Metal bond repair doblers & heat treatment process for metal
- Place vacuum and pressure bags over and inside wrapped parts and tools, and test for leaks as well as cut fabrics and composite materials
- Hand and machine finish parts to required tolerances and fit into completed assemblies
- Drill, saw, file, sand, pot, patch, build up, trim, fit and parts to meet production
- Interior modification for NBA players
- Composite repair on galleys and interior parts.
LEAD COMPOSITE & ASSEMBLY MECHANIC
ZODIAC AEROSPACE
01.2015 - 09.2015
- Assemble interior components
- Assemble shells and control systems
- Assemble furnishings, cabins & structures, galleys & equipment
- Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with company procedures
- Perform any repairs, rework, functional checks and the incorporation of authorized changes as outlined by lead
- Sizing and strength verification of primary and secondary aircraft structure
- Test articles using classical hand analysis methods and by interpreting results from finite element analysis
- Load paths, stability of structure, and aircraft structural behavior
- Coordinate with design engineering during design phase and review production drawings to ensure compliance with structural requirements.
AEROFRAME SERVICES, LAKE CHARLES, BACKSHOP
01.2013 - 07.2013
- Aircrafts Worked On: A320, A319, A330
- Assembly, disassembly and repair for interior parts & corporate work
- Inspection, removal, repair and reinstallation of interior parts
- Blueprint reading
- Repairs made using composite materials
- Preparation and painting of cockpit panels and ceiling panels.
Composite
AWW Mobile
01.2010 - 12.2012
- Aircrafts Worked On: Airbus 320, 319, 757
- Restoration of interior and exterior parts fallowing SRM & AMM
- Prepare aircraft for paint
- Blueprint reading
- Assembly, disassembly,and repair of interior parts.
Education
Federal Aviation Administration Certificate Number 0904898-20170616-00180 Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet -
June 16, 2017
safe place in case you -
lose your certificate above. FAA Safety Team Aviation Learning Center Course Certificate of Achievement -
Learning Center Online Course Basic Aircraft Systems Course Number ALC-414 (Qualifies for 1 Hour IA Refresher Training) Presented by -
Embry-Riddle Aeronautical University
Course Number ALC-457 (Qualifies for 2 Hours IA Refresher Training) Presented by FAA Safety Team -
June 20, 2017
Federal Aviation Administration Certificate Number 0904898-20170620-00457 Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in -
Federal Aviation Administration Certificate Number 0904898-20170617-00414 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case -
June 17, 2017
Center Online Course Dirty Dozen - Human Error In Aircraft Maintenance Course Number ALC-107 (Qualifies for 1 Hour IA Refresher Training) Presented by FAA Safety Team -
June 17, 2017
Federal Aviation Administration Certificate Number 0904898-20170617-00107 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you lose your certificate above. Certificate of Achievement This is to certify that Jose Barrios has successfully completed the FAA Safety Team Aviation Learning Center Online Course Failure To Follow Procedures - Inspections Course Number ALC-37 (Qualifies for 1 Hour IA Refresher Training) Presented by FAA Safety Team -
June 17, 2017
Federal Aviation Administration Certificate Number 0904898-20170617-00037 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you lose your certificate above. Certificate of Achievement This is to certify that Jose J. Barrios has successfully completed the FAA Safety Team Aviation Learning Center Online Course Failure To Follow Procedures - Landing Gear Failure Course Number ALC-83 Presented by FAA Safety Team -
June 20, 2017
Federal Aviation Administration Certificate Number 0904898-20170620-00083 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you lose your certificate above. Certificate of Achievement This is to certify that Jose Barrios has successfully completed the FAA Safety Team Aviation Learning Center Online Course Fatigue Countermeasure Training Course Number ALC-174 (Qualifies for 2 Hours IA Refresher Training) Presented by FAA Safety Team -
June 17, 2017
Federal Aviation Administration Certificate Number 0904898-20170617-00174 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you lose your certificate above. Certificate of Achievement This is to certify that Jose J. Barrios has successfully completed the FAA Safety Team Aviation Learning Center Online Course Human Factors Primer For Aviation Mechanics Course Number ALC-258 (Qualifies for 1 Hour IA Refresher Training) Presented by FAA Safety Team -
June 20, 2017
Federal Aviation Administration Certificate Number 0904898-20170620-00258 Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of -
FAA Safety Team Aviation Learning Center Course -
Center Online Course Representative Training: It Security Course Number ALC-297 Presented by FAA Safety Team -
June 20, 2017
Federal Aviation Administration Certificate Number 0904898-20170620-00297 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you -
Course Number ALC-327 (Qualifies for 2 Hours IA Refresher Training) Presented by FAA Safety Team -
June 20, 2017
Federal Aviation Administration Certificate Number 0904898-20170620-00327 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you -
AMT Core Course -
June 20, 2017
Federal Aviation Administration Certificate Number 0904898-20170620-00409 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you -
Aviation Learning Center Online Course Positive Aircraft Control Course Number ALC-36 Presented by Achieve -
June 23, 2017
Federal Aviation Administration Certificate Number 0904898-20170623-00036 FAA Safety Team Aviation Learning Center Course has successfully completed the Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you lose your certificate above. Certificate of Achievement This is to certify that Jose J. Barrios has successfully completed the FAA Safety Team Aviation Learning Center Online Course Failure To Follow Procedures - Rationalizations (Core Crs. 2016) Course Number ALC-445 (Qualifies for 1 Hour IA Refresher Training) Presented by FAA Safety Team -
June 20, 2017
Federal Aviation Administration Certificate Number 0904898-20170620-00445 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you -
Center Online Course Representative Training: Representative Manual Course Number ALC-270 Presented by FAA Safety Team -
June 20, 2017
Federal Aviation Administration Certificate Number 0904898-20170620-00270 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in case you -
Center Online Course The Impact Of Tire Maintenance On Aircraft Safety Course Number ALC-269 (Qualifies for 1 Hour IA Refresher Training) Presented by Michelin Aircraft Tire -
June 20, 2017
Federal Aviation Administration Certificate Number 0904898-20170620-00269 FAA Safety Team Aviation Learning Center Course Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet in a safe place in -
Learning Center Online Course Reducing Maintenance Related Engine Failures (Cc -
2017
Aviation Learning Center Online Course Pause For Safety (Core Course -
2015
Course Number ALC-409 (Qualifies for 1 Hour IA Refresher Training) Presented by FAA Safety Team -
2015
Aviation Learning Center Online Course Maintenance Error Avoidance (Core Course -
2014
Skills
- Successful career in the aviation industry since 2010
- Word, Excel, Office & Outlook Proficiency
- EO, VA, Blueprint, Drawing, Note, proficient using SRM, CMM & IPC
- Goal oriented, able to follow direction with little to no supervision, meet deadlines, interact well with customers,and able to lead people to a common goal in management experience
- Proficient in the use of precision measuring tools, Calipers, Micrometers, Hole and Ball gauges, and True Lock Gauges
- Manage activities of product lines/projects/programs involving department or cross-functional teams
- Focus on delivery within prescribed time frame and funding parameters
- Monitor product line/program/project from initiation through delivery
- Have over 10 years of technical writing, including writing and estimating job cards and non routines And technical Procedures
- Prepare project reports for senior management and clients
- Work effectively off of blueprints, EOs, VAs, Production Drawings/Notes, efficient using SRMs, MM&s and IPCs Special Licenses and Certifications: Have FAA sign off for Airframe License
Additional Information
- Special Licenses and Certifications: , Have FAA signoff for Airframe License.
Languages
Spanish
Native or Bilingual
English
Full Professional
Timeline
QUALITY CONTROL INSPECTOR
DAHER AEROSPACE
02.2023 - 07.2024
PPW CONFORMITY AUDITOR
QUALITY AEROSPACE ADVISORS
10.2021 - Current
QUALITY INSPECTOR & PAPERWORK CONFORMITY
AERSALE NEW MEXICO
06.2021 - 10.2021
COMPONENT SHOP INSPECTOR
AERSALE MIAMI
06.2020 - 06.2021
SHEETMETAL & COMPOSITE SHOP MANAGER
FLIGHT STAR AIRCRAFT SERVICES
06.2019 - 06.2020
SHEETMETAL MANAGER
ATS COMPONENTS
02.2019 - 06.2019
BONDING ASSEMBLY SUPERVISOR
01.2018 - 01.2019
COMPOSITE & SHEET METAL SPECIALIST
PREMIER AVIATION
10.2016 - 12.2017
COMPOSITE & SHEET METAL SPECIALIST
AAR AVIATION SERVICES
09.2016 - 10.2016
QUALITY CONTROL & ENGINEERING STRESS SUPPORT
ZODIAC AIRLINE CABIN
07.2016 - 09.2016
SHEET METAL SPECIALIST
FLIGHTSTAR AIRCRAFT SERVICES
01.2016 - 07.2016
LEAD COMPOSITE & ASSEMBLY MECHANIC
ZODIAC AEROSPACE
01.2015 - 09.2015
AEROFRAME SERVICES, LAKE CHARLES, BACKSHOP
01.2013 - 07.2013
Composite
AWW Mobile
01.2010 - 12.2012
Federal Aviation Administration Certificate Number 0904898-20170616-00180 Cut out the small certificate above and keep with your airman certificate. You should keep the remainder of this sheet -
safe place in case you -
lose your certificate above. FAA Safety Team Aviation Learning Center Course Certificate of Achievement -
Learning Center Online Course Basic Aircraft Systems Course Number ALC-414 (Qualifies for 1 Hour IA Refresher Training) Presented by -
Embry-Riddle Aeronautical University