Jorge Sanchez

• Walk down ISO&P&IDS with operators to perform pipe cuts,pipe demos,valves,psv's,exchangers to perform positive isolations for decommissioning project and various TAR'S.
• Torquing with clickers and hydraulic tools blinds and installation of new spools .Install IOS isolation plugs on pipes to perform welds ,install rigging to perform heavy riggings operations via rope access.

• Assisted on numerous work scopes of multiple crews of NDT and insulation for the completion of the CUI project via rope access.

• Job consisting of a stripping insulation off a tower for the removal of corrosion to perform AUT .

• Assist in different work scopes of multidiscipline crews consisting of bolting and torquing.Assisting with the removal of old pipe and the installation of new pipe,via bull and heavy rigging .Helping in NDE PT and MT in all rope access involment.

• Shaped or cut materials to specified measurements using hand tools, machines and power saws.
• Worked around live machinery and ongoing operations to complete projects on-time.
• Trained new employees on proper safety procedures for working near process equipment.
• Carried materials and equipment weighing up to 30+ pounds onto job sites in various climates and weather conditions.
• Calculated dimensions and amount of needed materials by accurately measuring job site and structures.
• Operated forklifts and other heavy equipment.
• Maintained safety and operational procedures for projects at heights of up to 100+ feet.
• Followed protocols and stayed organized to provide personal and teammate safety.
• Planned and executed work with proper tools and materials to maximize efficiency.
• Followed OSHA regulations and safety standards when using scaffold.
• Utilized ladders, small lifts and rope access systems to safely access hard-to-reach areas.
• Inspected scaffolding for safety and structural integrity before each use.
• Worked in team-focused environment to collaboratively complete projects on time and within budget.
• Followed safe work practices, which included fall protection and personal protective equipment.
• Measured, marked, cut, bored, fitted and installed various piping or structural components in accordance with blueprints and job specifications using hand and power tools.
• Laid out, positioned, aligned and secured parts for welding and bolt-up.
• Corresponded with supervisor to identify and carry out projects, implementing repairs, expansions and new installations according to customer requirements.
• Performed pneumatic and hydrostatic testing of systems and modified, repaired or expanded upon existing systems based on thorough understand of working mechanics.
• Followed fitting procedures and principles used in fabrication of offshore jackets, decks, heliports and production facilities.
• Fabricated pipe spools for butt weld, socket weld and threaded systems utilizing proper fit up techniques such as root openings on butt weld fittings and set back on socket weld fittings.

• Utilized ladders, small lifts and rope access systems to safely access hard-to-reach areas.
• Operated forklifts and other heavy equipment.
• Worked around live machinery and ongoing operations to complete scaffolding projects on-time.
• Worked in team-focused environment to collaboratively complete projects on time and within budget.
• Inspected scaffolding for safety and structural integrity before each use.
• Calculated dimensions and amount of needed materials by accurately measuring job site and structures.
• Followed protocols and stayed organized to provide personal and teammate safety.
• Followed OSHA regulations and safety standards when installing and working with scaffolding.
• Planned and executed work with proper tools and materials to maximize efficiency.
• Inspected buildings to identify repair needs.
• Utilized problem-solving skills to troubleshoot and resolve problems.
• Facilitated harmonious working relationships with crew members to prevent problems and conflicts.
• Maintained safety and operational procedures for projects at heights of up to 100+ feet.
• Shaped or cut materials to specified measurements using hand tools, machines and power saws.
• Carried materials and equipment weighing up to 30+ pounds onto job sites in various climates and weather conditions.
• Fit pipe for welders to weld.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
• Managed inventory of tools, supplies and equipment.
• Maintained compliance with all safety procedures from both client and employer.
• Read and interpreted blueprints and construction documents to determine project directives.
• Tightened or replaced bolts and gaskets to repair leaks.
• Used hand signals to notify crane operator to lift components to specific positions.
• Removed boiler casings, grades, handrails, manhole, and hole covers to facilitate access to boilers or other vessels for repair.
• Inspected equipment, structures and materials to identify cause of errors.

• Developed welding processes to improve coherence, accuracy and precision of welds.
• Monitored machinery to identify concerns, make corrections, or report complex problems.
• Maintained equipment in good working order.
• Utilized blueprints and diagrams to compare finished products against design specifications.
• Fetched materials, equipment and tools for welding professionals.
• Removed trash and excess materials to clean up work areas.
• Supported production needs by performing routine tasks using standard procedures and equipment.
• Chipped off excess weld, slag, and spatter using hand tools.
• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Prepared welding equipment to perform advanced welding work.
• Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
• Fabricated shop parts directly from blueprints.
• Removed and repaired unacceptable welds with grinder to meet quality guidelines.

• Developed welding processes to improve coherence, accuracy and precision of welds.
• Monitored machinery to identify concerns, make corrections, or report complex problems.
• Maintained equipment in good working order.
• Utilized blueprints and diagrams to compare finished products against design specifications.
• Fetched materials, equipment and tools for welding professionals.
• Removed and repaired unacceptable welds with grinder to meet quality guidelines.
• Removed trash and excess materials to clean up work areas.
• Supported production needs by performing routine tasks using standard procedures and equipment.
• Chipped off excess weld, slag, and spatter using hand tools.
• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
• Inspected welds and checked critical measurements to meet specifications.
• Prepared welding equipment to perform advanced welding work.
• Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
• Fabricated shop parts directly from blueprints.

.

• Facilitated harmonious working relationships with crew members to prevent problems and conflicts.
• Shaped or cut materials to specified measurements using hand tools, machines and power saws.
• Planned and executed work with proper tools and materials to maximize efficiency.
• Worked in team-focused environment to collaboratively complete projects on time.
• Followed OSHA regulations and safety standards when installing and working around scaffolding.
• Operated forklifts and other heavy equipment.
• Followed protocols and stayed organized to provide personal and teammate safety.
• Carried materials and equipment weighing up to 30+ pounds onto job sites in various climates and weather conditions.
• Utilized ladders, small lifts and rope access systems to safely access hard-to-reach areas.
• Tightened or replaced bolts and gaskets to repair leaks.
• Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
• Removed boiler casings, grades, handrails, manhole, and hole covers to facilitate access to boilers or other vessels for repair.
• Used power hammers or weld pressure vessel tubes to achieve leakproof joints.
• Identified issues and addressed each immediately with job foreman.
• Coordinated movement of materials and equipment to job sites.
• Interpreted blueprints, sketches and specifications for each job.
• Used hand signals to notify crane operator to lift components to specific positions.

• Carried materials and equipment weighing up to 30+pounds onto job sites in various climates and weather conditions.
• Transported materials and tools from work truck to project areas and organized supplies based on likely needs.
• Cleaned work areas, machines and equipment to maintain clean and safe job site.
• Followed OSHA regulations and safety standards when installing and working with scaffolding.
• Measured and cut wood pieces using hand saws and powered saws.
• Boosted team performance by collecting debris, extra materials, and tools to keep work areas clean and organized.
• Worked in team-focused environment to collaboratively complete projects on time.
• Followed safe work practices, which included fall protection and personal protective equipment.
• Measured, cut, threaded and assembled new pipe to place assembled pipe in hangers or other supports.
• Tested piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks.
• Mounted brackets and hangers on walls and ceilings to hold pipes in place.
• Cut or drilled holes in walls or floors to accommodate passage of pipes.
• Measured, cut and assembled new pipe and placed assembled pipe in hangers or other supports.
• Obtained precise results by performing accurate hydrotesting.
• Proven ability to learn quickly and adapt to new situations.
• Self-motivated, with a strong sense of personal responsibility.